Tender For Construction Of 1 No D Type And 2 Nos E Type And 1 No F Type Staff Quarter Building At Rasol Phc
Tender Value
1.23 Crore
Estimated cost
Bid Submission
30 Jul 2026
2 days left
EMD
1.23 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhenkanal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 1 No D Type And 2 Nos E Type And 1 No F Type Staff Quarter Building At Rasol Phc
BOQ
| Sl. No. | Item Description |
| 1 | D Type Qtr. CivilEarthwork in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m depth with cost of all labour T&P etc complete. |
| 2 | Earth work in excavation in hard soil with Area Filling in intial lead 50 mtr and lift including rough dressing and levelling the bed etc complete |
| 3 | Supplying, filling in F&P with clean course good river sand including watering, ramming, poking & compacting & cost, conveyance royalties, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in charge. |
| 4 | Providing and laying P.C.C. of (1:3:6) with 2.5cm to 4 cm size crusher broken hard black granite metal with cost, conveyance, royalties, taxes of all materials, all labour,T&P etc. Complete as per direction of Engineer in charge. (A.C.C, Ultratech, Dalmia cement use) |
| 5 | Providing and laying R.C.C. work in M-20 grade with 20mm and down grade black hard granite crusher broken stone chips of approved quality from quarry with smooth centering and shuttering hoisting and laying in layers including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. complete as per direction of the Engineer in charge. (A.C.C, Ultratech, Dalmia cement use). Base of Column (Ground Floor) |
| 6 | Plinth Band (Ground Floor) |
| 7 | Column Beam & Bed block (Ground Floor) |
| 8 | Lintel (Ground Floor) |
| 9 | Chajja (Ground Floor) |
| 10 | Roof Slab (Ground Floor) |
| 11 | Staircase (Ground Floor) |
| 12 | Providing M. S. Reinforcement for R.C.C. work including cutting, bending, binding & tying the grills & placing in position with cost of M. S. Rod and binding wire of 18 to 20 gauge including cost of all materials, labour, T&P etc. Complete as per direction of the Engineer in charge.(Ground Floor) |
| 13 | Fly Ash Brick masonary in C.M. (1:6) in F&P including cost, conveyance, royalties, taxes of all materials, labour, T&P etc. Complete as per direction of the Engineer in charge. |
| 14 | Fly Ash Brick masonary in C.M. (1:6) in superstructure including cost, conveyance, royalties, taxes of all materials, labour, T&P etc. Complete as per direction of the Engineer in charge. (Ground Floor) |
| 15 | Providing12mm thick cement plaster in C. M. (1:6) finished smooth to inside surface including cost conveyance, royalty, taxes of all materials, labour, T&P etc. complete as per direction of the Engineer in charge. (Out Side) |
| 16 | Providing 16mm thick cement plaster with C.M. (1:6) finished smooth over kerb wall and patches including cost, conveyance, royalty & taxes of materials, labour, T&P etc. complete as per direction of the Engineer in charge. (Inside) |
| 17 | Providing, Fitting and Fixing of tiles in fioors,walls,treads landings etc on 25mm thick bed of c.m(1:1) with neat cement slury mixed with pigment to match the shade of the tiles including cost of tiles etc complete (Vetrified tile of size 600x600mm) |
| 18 | Providing, Fitting and Fixing of tiles in fioors,walls,treads landings etc on 25mm thick bed of c.m(1:1) with neat cement slury mixed with pigment to match the shade of the tiles including cost of tiles etc complete (Granite tiles 20mm thick) Ground Floor |
| 19 | Providing & fixing Anti-skid Ceramic floor tiles in floors treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cleaning complete |
| 20 | Providing, fitting and fixing tiles in dados of approved make fitting, fixing with 12mm thick cement plaster in C.M. 1:3 and finishing the joint with epoxy grout including cost of all materials, labour, T&P etc. Complete as per direction of Engineer-in-charge.(Vetrified tile of size 600x600mm) |
| 21 | Supplying Fitting, fixing of 32mm thick flush door with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. Complete as per direction of Engineer in charge. (SOR-2022, Pg No. 234 & Item No. 9) |
| 22 | Providing and fixing of WPC Door Frames with rebate cuts and finishedcross section size 75mm x 45mm or 90mm x 50mm including of all materials costof all labour, conveyance taxes, loading, unloading, scaffolding, stagging, watering and curing T&P etc complete as per the direction of the EIC. |
| 23 | Supplying, fitting and fixing of M.S grill, Doors & Windows of approved quality and size including cost, conveyance, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in charge. (Door) |
| 24 | Supplying, fitting and fixing of M.S grill, Doors & Windows of approved quality and size including cost, conveyance, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in charge. (Windows) |
| 25 | Supplying, fitting and fixing of M.S grill, Doors & Windows of approved quality and size including cost, conveyance, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in charge. (M.S Grill) |
| 26 | Supplying, fitting and fixing of two track UPVC sliding windows of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fittings and fixtures, etcetc. all complete as per the direction of Engineer in Charge. (Ground Floor) |
| 27 | Providing Plastic Emulsion two coatsover a coat of primer & over Two coat plate finish of putty wall surface to make an even shade including cost, conveyance, royalties, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. |
| 28 | Weather coat painting two coats to make an ever finished surface in all floor and height with all scaffolding and staging charges including cost, conveyance & taxes of all materials labour & T&P etc. complete as directed by the Engineer in Charge. (OUT SIDE) |
| 29 | Providing Enamel painting two coats to old wood/iron work to make an even shade including cost, conveyance and taxes of all materials, labour, T&P etc. complete as per direction of the Engineer in Charge. |
| 30 | Providing Anti termite treatment to building etc complete. |
| 31 | Transperency board with Photography for public information. |
| 32 | Providing & fixing of R.C.C Ring and R.C.C. covers. In position Including labour charges,cost of materials & conveyance, etc. |
| 33 | Providing, supplying, fitting and fixing of stainless steel railing of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel pipe bracing of size 32mm z 6mm circular pipe in three rows in stair case as per approved quality and design including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. Complete as per direction of theEngineer in Charge. |
| 34 | Providing 20mm thick grading plaster (1:4) over the counter roof including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. |
| 35 | Supplying, fitting and fixing Interlocking Paver Block including cost of all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 9.3 sq.mt.) |
| 36 | Construction of granular Sub-base by providing Granular sub-base Close Graded Grading-VI material as per table 400-1 ,spreading in unifrom layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC , and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for road & Bridge works(4th. Revision) . |
| 37 | Dismatiling and removing R.C.C columns and beams ,slabs, stair case, landings and lintels including stacking the useful materials for reuse and removing the debris within 50m. Lead. |
| 38 | Dismantling brick or stone masonry in lime or cement mortar under 3 m height including stacking the useful materials for reuse and removing the debris with in 50. m Lead. |
| 39 | Cleaning and grubbing road land including uprooting rank vegitation ,grass from the berm etc complete. |
| 40 | D Type Qtr. EIRecessed wiring to light point/fan point/exhaust pont/call bell pont with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 41 | -do- .... Group B (1.1.2) |
| 42 | -do- .... Group C (1.1.3) |
| 43 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base & cover (1.24.2) |
| 44 | 6 Modular box with base & cover (1.24.4) |
| 45 | 8 Modular box with base & cover (1.24.5) |
| 46 | 12 Modular box with base & cover (1.24.6) |
| 47 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 48 | S/F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MODULE |
| 49 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX |
| 50 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) for Invertor Connection. |
| 51 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Anchor or Equivalent) |
| 52 | S/F of 15A Socket on 2 module for AC |
| 53 | S/F of 32 Amp rating C Series DP MCB for AC (Make:L&T/Havells/C&S/Equivalent) |
| 54 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 55 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 56 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 57 | -do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.3) |
| 58 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 59 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 60 | S/F of following 8 way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.6 |
| 61 | S/F of following 4way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.5 |
| 62 | S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 63 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 64 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 65 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2 +3.3) |
| 66 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 67 | S/F of 12 Watt. LED bulb(Make:Havells/Polycab or Equivalent) |
| 68 | Supply, Installation, Testing and commissionioning of 300mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: usha/polycab/crompton/havells/anchor/orient) |
| 69 | S/F fo 1200mm A.C.Cilling fan(1 star) without regulator including all conections (Model: Usha (Striker NEO HS)/Polycab Vital HS/ Crompton (hs)/ havells samrat ES/Orient (Blitz)/ Anchor-Turbo Speed)/great white (Aldous) |
| 70 | S/F of step type modular fan regulator |
| 71 | S/F of Fan hook S, Type on ceiling. |
| 72 | S/F of 18-25W LED Tubelight fillting with all accessories and connection (Make : Crompton / HPL / Havells / Polycab / PAC |
| 73 | S/F of 45-48 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection ( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 74 | D Type Qtr. PHEarthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.5 mtr |
| 75 | From 1.5 mtr to 3.0 mtr depth |
| 76 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. |
| 77 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 78 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 79 | Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 80 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 81 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 82 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 83 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 84 | Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 85 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 86 | Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 87 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 88 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 89 | Supplying all materials, labour T&P and fixing Ceramic Tiles in floors on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per specificat. |
| 90 | Supplying all materials, labour T&P and fixing porcelain glazed tiles in dados skirting, on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of Engineer-in-Charge. |
| 91 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. 2 x 0.75 x 2.05 |
| 92 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in cm (1:4) for taking GI / PVC pipes and making good the damages etc all complete as per P.H specification and direction of the E.I.C. a) Cutting Hole (250 mm thick wall) |
| 93 | Cutting Grooves in wall or floor |
| 94 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Neycer/Cerra/ Parry ware/ Hindware) |
| 95 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. a) 580mmx440mm size White Orissa pan (PARRYWARE, CERA, HINDWARE) |
| 96 | European water closet with P trap plain with seat cover |
| 97 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-550mmx400mm size wash hand basin . (Cerra/ Parry ware/ Hindware) |
| 98 | Fixing of Pedestrial for W.H.B |
| 99 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. 610x510x200 mm stainless steel kitchen sink |
| 100 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. (PLAZA/AMBAR) 15mm dia CP long body bib cock |
| 101 | 15mm dia CP short body bib cock |
| 102 | 15mm dia CP Two way angle/Bib Cock |
| 103 | 15mm dia CP Health Fuccet |
| 104 | 15mm dia CP Angle Stop Cock |
| 105 | 15 mm dia CP Pillar Cock |
| 106 | 15mm dia CP concealed stop cock |
| 107 | a) Fixing of 20mmx450mm long CP towel rail |
| 108 | 25mm dia U-PVC Ball Valve[Metal Ball] |
| 109 | 32mm dia U-PVC Ball Valve[Metal Ball] |
| 110 | 15mm x 225mm long size CP shower arm |
| 111 | CP towel ring |
| 112 | fixing CP soap holder |
| 113 | 15mm dia CP flange |
| 114 | 15 mm C.P Extension piece 50 mm long |
| 115 | 450mmx125mm size plate Acrylic shelf |
| 116 | Fixing of Glass Mirror 600mmx450mm size B.E mirror (fixed type) |
| 117 | Supplying all materials, labour, T&P and fitting and fixing U-PVC soil waste ventilating pipes of and fittings of the following outside diameter of 4kg/cm2 conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. a) 110mm dia PVC SWR pipe |
| 118 | 110mm dia Plain bend |
| 119 | 110mm U-PVC door bend |
| 120 | 110mm U-PVC door Tee |
| 121 | 110mm dia cowl |
| 122 | 125mm dia CP grating |
| 123 | 110mm dia PVC P trap |
| 124 | 75 mm dia PVC SWR Pipe |
| 125 | 75mm PVC SWR plain bend |
| 126 | 75mm PVC SWR door bend |
| 127 | Supplying all materials, labour, T&P and providing and fixing to wall or ceilling and floor PVC pipes conforming to (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing etc all complete as per P.H specification and direction of the E.I.C. a) 20mm dia C-PVC pipe (Internal) |
| 128 | 25mm dia ASTM/PVC pipe (External) |
| 129 | 32mm dia ASTM/PVC pipe (external) |
| 130 | 25mm dia C-PVC pipe (External) |
| 131 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:1.5:3) mix using 12 mm size H.G chips, foundation concrete (1:3:6) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. (a).Inside size 250mmx250mm |
| 132 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm |
| 133 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. Construction of Soak way Pit Construction of Soak way Pit (0.90 m dia x 2.00m Deep) |
| 134 | Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. Laying of 100 mm dia S.W Pipe line Haunch top |
| 135 | Supplying all materials, labour, T&P and Fitting and Fixing of PVC water storage tank including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacity Sintex tank |
| 136 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacit |
| 137 | SINKING OF TW Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell) Drilling of 125mm dia bore- |
| 138 | Drilling of 100mmdia bore- 100 Mtr to 150 Mtr |
| 139 | Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above. a) Lowering of 125mm dia PVC pipe (Labour) |
| 140 | Cost of 125mm dia PVC pipe (Sch-80-ISI mark) |
| 141 | Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer in Charge. |
| 142 | Installation of pump setSupply of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 1800-2200 ltr/hour and a head of 45-60 Mtr of reputed make like KSB/TEXMO and equivlant including all cost conveyance and taxes etc all complete as per the direction of E.I.C. |
| 143 | Supplying all labour, T&P and fitting abnd fixing of 1.00 HP single phase vertical submersible pump set with commissioning and testing etc all complete as per the direction of E.I.C. |
| 144 | Supplying all labour, T&P and fitting abnd fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00 HP single phase submersible pump including all cost, conveyance of all taxes etc all complete as per the direction of E.I.C. |
| 145 | Supplying all labour, T&P and fitting abnd fixing of three core flat cable (1.5 mm2) of ISI mark of reputed make like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc all complete as per as per the direction of E.I.C. |
| 146 | Supplying all labour, T&P and fitting abnd fixing of plastic rope MS well cover, MS clamp, stainless steel short piece, bend and socket including all cost, taxes etc all complete as per as per the direction of E.I.C. |
| 147 | Supplying all labour, T&P and fitting abnd fixing of HDPE pipe and fitting with making connection to pump set including all cost, taxes etc all complete as per as per the direction of E.I.C. A) 25mm dia HDPE pipe (internal) |
| 148 | BORE PROTECTION Supplying all materials, labour, T&P for construction of bore protection wall with providing sand filling, cement concrete (1:4:8) with HG metal & KB brick work in cement mortar (1:6) of 1.15 height, 16mm thick CP over the brick work, RCC slab of size 0.95 x 0.95 x 0.75 mtr avairage length in C 1:1.5:3, centering shutering including watering curing conveyance of all materials to work site with all cost, taxes etc all complete as per as per the direction of E.I.C. |
| 149 | E Type Qtr.CivilEarthwork in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m depth with cost of all labour T&P etc complete. |
| 150 | Earth work in excavation in hard soil with Area Filling in intial lead 50 mtr and lift including rough dressing and levelling the bed etc complete |
| 151 | Supplying, filling in F&P with clean course good river sand including watering, ramming, poking & compacting & cost, conveyance royalties, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. |
| 152 | Providing and laying P.C.C. of (1:3:6) with 2.5cm to 4 cm size crusher broken hard black granite metal with cost, conveyance, royalties, taxes of all materials, all labour,T&P etc. Complete as per direction of Engineer in Charge. (A.C.C, Ultratech, Dalmia cement use) |
| 153 | Providing and laying R.C.C. work in M-20 grade with 20mm and down grade black hard granite crusher broken stone chips of approved quality from quarry with smooth centering and shuttering hoisting and laying in layers including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. complete as per direction of the Engineer in Charge. (A.C.C, Ultratech, Dalmia cement use). Base of Column (Ground Floor) |
| 154 | Plinth Band (Ground Floor) |
| 155 | Column Beam & Bed block (Ground Floor) |
| 156 | Lintel (Ground Floor) |
| 157 | Chajja (Ground Floor) |
| 158 | Roof Slab (Ground Floor) |
| 159 | Staircase (Ground Floor) |
| 160 | Providing M. S. Reinforcement for R.C.C. work including cutting, bending, binding & tying the grills & placing in position with cost of M. S. Rod and binding wire of 18 to 20 gauge including cost of all materials, labour, T&P etc. Complete as per direction of the Engineer in Charge.(Ground Floor) |
| 161 | Fly Ash Brick masonary in C.M. (1:6) in F&P including cost, conveyance, royalties, taxes of all materials, labour, T&P etc. Complete as per direction of the Engineer in Charge. |
| 162 | Fly Ash Brick masonary in C.M. (1:6) in superstructure including cost, conveyance, royalties, taxes of all materials, labour, T&P etc. Complete as per direction of the Engineer in Charge. (Ground Floor) |
| 163 | Providing12mm thick cement plaster in C. M. (1:6) finished smooth to inside surface including cost conveyance, royalty, taxes of all materials, labour, T&P etc. complete as per direction of the Engineer in Charge. (Out Side) |
| 164 | Providing 16mm thick cement plaster with C.M. (1:6) finished smooth over kerb wall and patches including cost, conveyance, royalty & taxes of materials, labour, T&P etc. complete as per direction of the Engineer in Charge. (Inside) |
| 165 | Providing, Fitting and Fixing of tiles in fioors,walls,treads landings etc on 25mm thick bed of c.m(1:1) with neat cement slury mixed with pigment to match the shade of the tiles including cost of tiles etc complete (Vetrified tile of size 600x600mm) |
| 166 | Providing, Fitting and Fixing of tiles in fioors,walls,treads landings etc on 25mm thick bed of c.m(1:1) with neat cement slury mixed with pigment to match the shade of the tiles including cost of tiles etc complete (Granite tiles 20mm thick) Ground Floor |
| 167 | Providing & fixing Anti-skid Ceramic floor tiles in floors treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cleaning complete |
| 168 | Providing, fitting and fixing tiles in dados of approved make fitting, fixing with 12mm thick cement plaster in C.M. 1:3 and finishing the joint with epoxy grout including cost of all materials, labour, T&P etc. Complete as per direction of Engineer-in-charge.(Vetrified tile of size 600x600mm) |
| 169 | Supplying Fitting, fixing of 32mm thick flush door with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. Complete as per direction of Engineer-in -charge. (SOR-2022, Pg No. 234 & Item No. 9) |
| 170 | Providing and fixing of WPC Door Frames with rebate cuts and finishedcross section size 75mm x 45mm or 90mm x 50mm including of all materials costof all labour, conveyance taxes, loading, unloading, scaffolding, stagging, watering and curing T&P etc complete as per the direction of the EIC. |
| 171 | Supplying, fitting and fixing of M.S grill, Doors & Windows of approved quality and size including cost, conveyance, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. (Door) |
| 172 | Supplying, fitting and fixing of M.S grill, Doors & Windows of approved quality and size including cost, conveyance, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. (Windows) |
| 173 | Supplying, fitting and fixing of M.S grill, Doors & Windows of approved quality and size including cost, conveyance, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. (M.S Grill) |
| 174 | Supplying, fitting and fixing of two track UPVC sliding windows of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fittings and fixtures, etcetc. all complete as per the direction of Engineer in Charge. (Ground Floor) |
| 175 | Providing Plastic Emulsion two coatsover a coat of primer & over Two coat plate finish of putty wall surface to make an even shade including cost, conveyance, royalties, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge.. |
| 176 | Weather coat painting two coats to make an ever finished surface in all floor and height with all scaffolding and staging charges including cost, conveyance & taxes of all materials labour & T&P etc. complete as directed by the Engineer in Charge. (OUT SIDE) |
| 177 | Providing Enamel painting two coats to old wood/iron work to make an even shade including cost, conveyance and taxes of all materials, labour, T&P etc. complete as per direction of the Engineer in Charge. |
| 178 | Providing Anti termite treatment to building etc complete. |
| 179 | Providing & fixing of R.C.C Ring and R.C.C. covers. In position Including labour charges,cost of materials & conveyance, etc. |
| 180 | Providing, supplying, fitting and fixing of stainless steel railing of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel pipe bracing of size 32mm z 6mm circular pipe in three rows in stair case as per approved quality and design including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. Complete as per direction of theEngineer in Charge. |
| 181 | Providing 20mm thick grading plaster (1:4) over the counter roof including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. |
| 182 | Supplying, fitting and fixing Interlocking Paver Block including cost of all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 9.3 sq.mt.) |
| 183 | Construction of granular Sub-base by providing Granular sub-base Close Graded Grading-VI material as per table 400-1 ,spreading in unifrom layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC , and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for road & Bridge works(4th. Revision) . |
| 184 | E Type Qtr.EIRecessed wiring to light point/fan point/exhaust pont/call bell pont with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 185 | -do- .... Group B (1.1.2) |
| 186 | -do- .... Group C (1.1.3) |
| 187 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base & cover (1.24.2) |
| 188 | 6 Modular box with base & cover (1.24.4) |
| 189 | 8 Modular box with base & cover (1.24.5) |
| 190 | 12 Modular box with base & cover (1.24.6) |
| 191 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 192 | S/F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MODULE |
| 193 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX |
| 194 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) for Invertor Connection. |
| 195 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Anchor or Equivalent) |
| 196 | S/F of 15A Socket on 2 module for AC |
| 197 | S/F of 32 Amp rating C Series DP MCB for AC (Make:L&T/Havells/C&S/Equivalent) |
| 198 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 199 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 200 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 201 | -do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.3) |
| 202 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 203 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 204 | S/F of following 8 way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.6 |
| 205 | S/F of following 4way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.5 |
| 206 | S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 207 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 208 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 209 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2 +3.3) |
| 210 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 211 | S/F of 12 Watt. LED bulb(Make:Havells/Polycab or Equivalent) |
| 212 | Supply, Installation, Testing and commissionioning of 300mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: usha/polycab/crompton/havells/anchor/orient) |
| 213 | S/F fo 1200mm A.C.Cilling fan(1 star) without regulator including all conections (Model: Usha (Striker NEO HS)/Polycab Vital HS/ Crompton (hs)/ havells samrat ES/Orient (Blitz)/ Anchor-Turbo Speed)/great white (Aldous) |
| 214 | S/F of step type modular fan regulator |
| 215 | S/F of Fan hook S, Type on ceiling. |
| 216 | S/F of 18-25W LED Tubelight fillting with all accessories and connection (Make : Crompton / HPL / Havells / Polycab / PAC |
| 217 | S/F of 45-48 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection ( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 218 | E Type Qtr.PHEarthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.5 mtr |
| 219 | From 1.5 mtr to 3.0 mtr depth |
| 220 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. |
| 221 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 222 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 223 | Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 224 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 225 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 226 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 227 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 228 | Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 229 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 230 | Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 231 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 232 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 233 | Supplying all materials, labour T&P and fixing Ceramic Tiles in floors on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per specificat. |
| 234 | Supplying all materials, labour T&P and fixing porcelain glazed tiles in dados skirting, on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of Engineer in Charge. |
| 235 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. 2 x 0.75 x 2.05 |
| 236 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in cm (1:4) for taking GI / PVC pipes and making good the damages etc all complete as per P.H specification and direction of the E.I.C. a) Cutting Hole (250 mm thick wall) |
| 237 | Cutting Grooves in wall or floor |
| 238 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Neycer/Cerra/ Parry ware/ Hindware) |
| 239 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. a) 580mmx440mm size White Orissa pan (PARRYWARE, CERA, HINDWARE) |
| 240 | European water closet with P trap plain with seat cover |
| 241 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-550mmx400mm size wash hand basin . (Cerra/ Parry ware/ Hindware) |
| 242 | Fixing of Pedestrial for W.H.B |
| 243 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. 610x510x200 mm stainless steel kitchen sink |
| 244 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. (PLAZA/AMBAR) 15mm dia CP long body bib cock |
| 245 | 15mm dia CP short body bib cock |
| 246 | 15mm dia CP Two way angle/Bib Cock |
| 247 | 15mm dia CP Health Fuccet |
| 248 | 15mm dia CP Angle Stop Cock |
| 249 | 15 mm dia CP Pillar Cock |
| 250 | 15mm dia CP concealed stop cock |
| 251 | a) Fixing of 20mmx450mm long CP towel rail |
| 252 | 25mm dia U-PVC Ball Valve[Metal Ball] |
| 253 | 32mm dia U-PVC Ball Valve[Metal Ball] |
| 254 | 15mm x 225mm long size CP shower arm |
| 255 | CP towel ring |
| 256 | fixing CP soap holder |
| 257 | 15mm dia CP flange |
| 258 | 15 mm C.P Extension piece 50 mm long |
| 259 | 450mmx125mm size plate Acrylic shelf |
| 260 | Fixing of Glass Mirror 600mmx450mm size B.E mirror (fixed type) |
| 261 | Supplying all materials, labour, T&P and fitting and fixing U-PVC soil waste ventilating pipes of and fittings of the following outside diameter of 4kg/cm2 conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. a) 110mm dia PVC SWR pipe |
| 262 | 110mm dia Plain bend |
| 263 | 110mm U-PVC door bend |
| 264 | 110mm U-PVC door Tee |
| 265 | 110mm dia cowl |
| 266 | 125mm dia CP grating |
| 267 | 110mm dia PVC P trap |
| 268 | 75 mm dia PVC SWR Pipe |
| 269 | 75mm PVC SWR plain bend |
| 270 | 75mm PVC SWR door bend |
| 271 | Supplying all materials, labour, T&P and providing and fixing to wall or ceilling and floor PVC pipes conforming to (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing etc all complete as per P.H specification and direction of the E.I.C. a) 20mm dia C-PVC pipe (Internal) |
| 272 | 25mm dia ASTM/PVC pipe (External) |
| 273 | 32mm dia ASTM/PVC pipe (external) |
| 274 | 25mm dia C-PVC pipe (External) |
| 275 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:1.5:3) mix using 12 mm size H.G chips, foundation concrete (1:3:6) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. (a).Inside size 250mmx250mm |
| 276 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm |
| 277 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. Construction of Soak way Pit Construction of Soak way Pit (0.90 m dia x 2.00m Deep) |
| 278 | Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. Laying of 100 mm dia S.W Pipe line Haunch top |
| 279 | Supplying all materials, labour, T&P and Fitting and Fixing of PVC water storage tank including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacity Sintex tank |
| 280 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacit |
| 281 | SINKING OF TW Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell) Drilling of 125mm dia bore- |
| 282 | Drilling of 100mmdia bore- 100 Mtr to 150 Mtr |
| 283 | Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above. a) Lowering of 125mm dia PVC pipe (Labour) |
| 284 | Cost of 125mm dia PVC pipe (Sch-80-ISI mark) |
| 285 | Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer in Charge. |
| 286 | Installation of pump setSupply of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 1800-2200 ltr/hour and a head of 45-60 Mtr of reputed make like KSB/TEXMO and equivlant including all cost conveyance and taxes etc all complete as per the direction of E.I.C. |
| 287 | Supplying all labour, T&P and fitting abnd fixing of 1.00 HP single phase vertical submersible pump set with commissioning and testing etc all complete as per the direction of E.I.C. |
| 288 | Supplying all labour, T&P and fitting abnd fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00 HP single phase submersible pump including all cost, conveyance of all taxes etc all complete as per the direction of E.I.C. |
| 289 | Supplying all labour, T&P and fitting abnd fixing of three core flat cable (1.5 mm2) of ISI mark of reputed make like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc all complete as per as per the direction of E.I.C. |
| 290 | Supplying all labour, T&P and fitting abnd fixing of plastic rope MS well cover, MS clamp, stainless steel short piece, bend and socket including all cost, taxes etc all complete as per as per the direction of E.I.C. |
| 291 | Supplying all labour, T&P and fitting abnd fixing of HDPE pipe and fitting with making connection to pump set including all cost, taxes etc all complete as per as per the direction of E.I.C. A) 25mm dia HDPE pipe (internal) |
| 292 | BORE PROTECTION Supplying all materials, labour, T&P for construction of bore protection wall with providing sand filling, cement concrete (1:4:8) with HG metal & KB brick work in cement mortar (1:6) of 1.15 height, 16mm thick CP over the brick work, RCC slab of size 0.95 x 0.95 x 0.75 mtr avairage length in C 1:1.5:3, centering shutering including watering curing conveyance of all materials to work site with all cost, taxes etc all complete as per as per the direction of E.I.C. |
| 293 | F Type Qtr.CivilEarthwork in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m depth with cost of all labour T&P etc complete. |
| 294 | Earth work in excavation in hard soil with Area Filling in intial lead 50 mtr and lift including rough dressing and levelling the bed etc complete |
| 295 | Supplying, filling in F&P with clean course good river sand including watering, ramming, poking & compacting & cost, conveyance royalties, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. |
| 296 | Providing and laying P.C.C. of (1:3:6) with 2.5cm to 4 cm size crusher broken hard black granite metal with cost, conveyance, royalties, taxes of all materials, all labour,T&P etc. Complete as per direction of Engineer in Charge. (A.C.C, Ultratech, Dalmia cement use) |
| 297 | Providing and laying R.C.C. work in M-20 grade with 20mm and down grade black hard granite crusher broken stone chips of approved quality from quarry with smooth centering and shuttering hoisting and laying in layers including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. complete as per direction of the Engineer in Charge. (A.C.C, Ultratech, Dalmia cement use). Base of Column (Ground Floor) |
| 298 | Plinth Band (Ground Floor) |
| 299 | Column Beam & Bed block (Ground Floor) |
| 300 | Lintel (Ground Floor) |
| 301 | Chajja (Ground Floor) |
| 302 | Roof Slab (Ground Floor) |
| 303 | Staircase (Ground Floor) |
| 304 | Providing M. S. Reinforcement for R.C.C. work including cutting, bending, binding & tying the grills & placing in position with cost of M. S. Rod and binding wire of 18 to 20 gauge including cost of all materials, labour, T&P etc. Complete as per direction of the Engineer in Charge.(Ground Floor) |
| 305 | Fly Ash Brick masonary in C.M. (1:6) in F&P including cost, conveyance, royalties, taxes of all materials, labour, T&P etc. Complete as per direction of the Engineer in Charge. |
| 306 | Fly Ash Brick masonary in C.M. (1:6) in superstructure including cost, conveyance, royalties, taxes of all materials, labour, T&P etc. Complete as per direction of the Engineer in Charge.(Ground Floor) |
| 307 | Providing12mm thick cement plaster in C. M. (1:6) finished smooth to inside surface including cost conveyance, royalty, taxes of all materials, labour, T&P etc. complete as per direction of the Engineer in Charge. (Out Side) |
| 308 | Providing 16mm thick cement plaster with C.M. (1:6) finished smooth over kerb wall and patches including cost, conveyance, royalty & taxes of materials, labour, T&P etc. complete as per direction of the Engineer in Charge. (Inside) |
| 309 | Providing, Fitting and Fixing of tiles in fioors,walls,treads landings etc on 25mm thick bed of c.m(1:1) with neat cement slury mixed with pigment to match the shade of the tiles including cost of tiles etc complete (Vetrified tile of size 600x600mm) |
| 310 | Providing, Fitting and Fixing of tiles in fioors,walls,treads landings etc on 25mm thick bed of c.m(1:1) with neat cement slury mixed with pigment to match the shade of the tiles including cost of tiles etc complete (Granite tiles 20mm thick) Ground Floor |
| 311 | Providing & fixing Anti-skid Ceramic floor tiles in floors treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cleaning complete |
| 312 | Providing, fitting and fixing tiles in dados of approved make fitting, fixing with 12mm thick cement plaster in C.M. 1:3 and finishing the joint with epoxy grout including cost of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge.(Vetrified tile of size 600x600mm) |
| 313 | Supplying Fitting, fixing of 32mm thick flush door with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. Complete as per direction of Engineer in Charge. (SOR-2022, Pg No. 234 & Item No. 9) |
| 314 | Providing and fixing of WPC Door Frames with rebate cuts and finishedcross section size 75mm x 45mm or 90mm x 50mm including of all materials costof all labour, conveyance taxes, loading, unloading, scaffolding, stagging, watering and curing T&P etc complete as per the direction of the EIC. |
| 315 | Supplying, fitting and fixing of M.S grill, Doors & Windows of approved quality and size including cost, conveyance, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. (Door) |
| 316 | Supplying, fitting and fixing of M.S grill, Doors & Windows of approved quality and size including cost, conveyance, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. (Windows) |
| 317 | Supplying, fitting and fixing of M.S grill, Doors & Windows of approved quality and size including cost, conveyance, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. (M.S Grill) |
| 318 | Supplying, fitting and fixing of two track UPVC sliding windows of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fittings and fixtures, etcetc. all complete as per the direction of Engineer in Charge.(Ground Floor) |
| 319 | Providing Plastic Emulsion two coatsover a coat of primer & over Two coat plate finish of putty wall surface to make an even shade including cost, conveyance, royalties, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. |
| 320 | Weather coat painting two coats to make an ever finished surface in all floor and height with all scaffolding and staging charges including cost, conveyance & taxes of all materials labour & T&P etc. complete as directed by the Engineer in Charge.(OUT SIDE) |
| 321 | Providing Enamel painting two coats to old wood/iron work to make an even shade including cost, conveyance and taxes of all materials, labour, T&P etc. complete as per direction of the Engineer in Charge. |
| 322 | Providing Anti termite treatment to building etc complete. |
| 323 | Providing & fixing of R.C.C Ring and R.C.C. covers. In position Including labour charges,cost of materials & conveyance, etc. |
| 324 | Providing, supplying, fitting and fixing of stainless steel railing of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel pipe bracing of size 32mm z 6mm circular pipe in three rows in stair case as per approved quality and design including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. Complete as per direction of the Engineer in Charge. |
| 325 | Providing 20mm thick grading plaster (1:4) over the counter roof including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. Complete as per direction of Engineer in Charge. |
| 326 | Supplying, fitting and fixing Interlocking Paver Block including cost of all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 9.3 sq.mt.) |
| 327 | Construction of granular Sub-base by providing Granular sub-base Close Graded Grading-VI material as per table 400-1 ,spreading in unifrom layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC , and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for road & Bridge works(4th. Revision) . |
| 328 | F Type Qtr.EIRecessed wiring to light point/fan point/exhaust pont/call bell pont with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 329 | -do- .... Group B (1.1.2) |
| 330 | -do- .... Group C (1.1.3) |
| 331 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base & cover (1.24.2) |
| 332 | 6 Modular box with base & cover (1.24.4) |
| 333 | 8 Modular box with base & cover (1.24.5) |
| 334 | 12 Modular box with base & cover (1.24.6) |
| 335 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 336 | S/F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MODULE |
| 337 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX |
| 338 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) for Invertor Connection. |
| 339 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Anchor or Equivalent) |
| 340 | S/F of 15A Socket on 2 module for AC |
| 341 | S/F of 32 Amp rating C Series DP MCB for AC (Make:L&T/Havells/C&S/Equivalent) |
| 342 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 343 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 344 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 345 | -do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.3) |
| 346 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 347 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 348 | S/F of following 8 way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.6 |
| 349 | S/F of following 4way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.5 |
| 350 | S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 351 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 352 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 353 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2 +3.3) |
| 354 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 355 | S/F of 12 Watt. LED bulb(Make:Havells/Polycab or Equivalent) |
| 356 | Supply, Installation, Testing and commissionioning of 300mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: usha/polycab/crompton/havells/anchor/orient) |
| 357 | S/F fo 1200mm A.C.Cilling fan(1 star) without regulator including all conections (Model: Usha (Striker NEO HS)/Polycab Vital HS/ Crompton (hs)/ havells samrat ES/Orient (Blitz)/ Anchor-Turbo Speed)/great white (Aldous) |
| 358 | S/F of step type modular fan regulator |
| 359 | S/F of Fan hook S, Type on ceiling. |
| 360 | S/F of 18-25W LED Tubelight fillting with all accessories and connection (Make : Crompton / HPL / Havells / Polycab / PAC |
| 361 | S/F of 45-48 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection ( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 362 | F Type Qtr.PHEarthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.5 mtr |
| 363 | From 1.5 mtr to 3.0 mtr depth |
| 364 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. |
| 365 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 366 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 367 | Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 368 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 369 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 370 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 371 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 372 | Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 373 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 374 | Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 375 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 376 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 377 | Supplying all materials, labour T&P and fixing Ceramic Tiles in floors on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per specificat. |
| 378 | Supplying all materials, labour T&P and fixing porcelain glazed tiles in dados skirting, on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of Engineer-in-Charge. |
| 379 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. 2 x 0.75 x 2.05 |
| 380 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in cm (1:4) for taking GI / PVC pipes and making good the damages etc all complete as per P.H specification and direction of the E.I.C. a) Cutting Hole (250 mm thick wall) |
| 381 | Cutting Grooves in wall or floor |
| 382 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Neycer/Cerra/ Parry ware/ Hindware) |
| 383 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. a) 580mmx440mm size White Orissa pan (PARRYWARE, CERA, HINDWARE) |
| 384 | European water closet with P trap plain with seat cover |
| 385 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-550mmx400mm size wash hand basin . (Cerra/ Parry ware/ Hindware) |
| 386 | Fixing of Pedestrial for W.H.B |
| 387 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. 610x510x200 mm stainless steel kitchen sink |
| 388 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. (PLAZA/AMBAR) 15mm dia CP long body bib cock |
| 389 | 15mm dia CP short body bib cock |
| 390 | 15mm dia CP Two way angle/Bib Cock |
| 391 | 15mm dia CP Health Fuccet |
| 392 | 15mm dia CP Angle Stop Cock |
| 393 | 15 mm dia CP Pillar Cock |
| 394 | 15mm dia CP concealed stop cock |
| 395 | a) Fixing of 20mmx450mm long CP towel rail |
| 396 | 25mm dia U-PVC Ball Valve[Metal Ball] |
| 397 | 32mm dia U-PVC Ball Valve[Metal Ball] |
| 398 | 15mm x 225mm long size CP shower arm |
| 399 | CP towel ring |
| 400 | fixing CP soap holder |
| 401 | 15mm dia CP flange |
| 402 | 15 mm C.P Extension piece 50 mm long |
| 403 | 450mmx125mm size plate Acrylic shelf |
| 404 | Fixing of Glass Mirror 600mmx450mm size B.E mirror (fixed type) |
| 405 | Supplying all materials, labour, T&P and fitting and fixing U-PVC soil waste ventilating pipes of and fittings of the following outside diameter of 4kg/cm2 conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. a) 110mm dia PVC SWR pipe |
| 406 | 110mm dia Plain bend |
| 407 | 110mm U-PVC door bend |
| 408 | 110mm U-PVC door Tee |
| 409 | 110mm dia cowl |
| 410 | 125mm dia CP grating |
| 411 | 110mm dia PVC P trap |
| 412 | 75 mm dia PVC SWR Pipe |
| 413 | 75mm PVC SWR plain bend |
| 414 | 75mm PVC SWR door bend |
| 415 | Supplying all materials, labour, T&P and providing and fixing to wall or ceilling and floor PVC pipes conforming to (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing etc all complete as per P.H specification and direction of the E.I.C. a) 20mm dia C-PVC pipe (Internal) |
| 416 | 25mm dia ASTM/PVC pipe (External) |
| 417 | 32mm dia ASTM/PVC pipe (external) |
| 418 | 25mm dia C-PVC pipe (External) |
| 419 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:1.5:3) mix using 12 mm size H.G chips, foundation concrete (1:3:6) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. (a).Inside size 250mmx250mm |
| 420 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm |
| 421 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. Construction of Soak way Pit Construction of Soak way Pit (0.90 m dia x 2.00m Deep) |
| 422 | Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. Laying of 100 mm dia S.W Pipe line Haunch top |
| 423 | Supplying all materials, labour, T&P and Fitting and Fixing of PVC water storage tank including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacity Sintex tank |
| 424 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacit |
| 425 | SINKING OF TW Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell) Drilling of 125mm dia bore- |
| 426 | Drilling of 100mmdia bore- 100 Mtr to 150 Mtr |
| 427 | Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above. a) Lowering of 125mm dia PVC pipe (Labour) |
| 428 | Cost of 125mm dia PVC pipe (Sch-80-ISI mark) |
| 429 | Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer in Charge. |
| 430 | Installation of pump setSupply of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 1800-2200 ltr/hour and a head of 45-60 Mtr of reputed make like KSB/TEXMO and equivlant including all cost conveyance and taxes etc all complete as per the direction of E.I.C. |
| 431 | Supplying all labour, T&P and fitting abnd fixing of 1.00 HP single phase vertical submersible pump set with commissioning and testing etc all complete as per the direction of E.I.C. |
| 432 | Supplying all labour, T&P and fitting abnd fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00 HP single phase submersible pump including all cost, conveyance of all taxes etc all complete as per the direction of E.I.C. |
| 433 | Supplying all labour, T&P and fitting abnd fixing of three core flat cable (1.5 mm2) of ISI mark of reputed make like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc all complete as per as per the direction of E.I.C. |
| 434 | Supplying all labour, T&P and fitting abnd fixing of plastic rope MS well cover, MS clamp, stainless steel short piece, bend and socket including all cost, taxes etc all complete as per as per the direction of E.I.C. |
| 435 | Supplying all labour, T&P and fitting abnd fixing of HDPE pipe and fitting with making connection to pump set including all cost, taxes etc all complete as per as per the direction of E.I.C. A) 25mm dia HDPE pipe (internal) |
| 436 | BORE PROTECTION Supplying all materials, labour, T&P for construction of bore protection wall with providing sand filling, cement concrete (1:4:8) with HG metal & KB brick work in cement mortar (1:6) of 1.15 height, 16mm thick CP over the brick work, RCC slab of size 0.95 x 0.95 x 0.75 mtr avairage length in C 1:1.5:3, centering shutering including watering curing conveyance of all materials to work site with all cost, taxes etc all complete as per as per the direction of E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender