Tender For Providing, Laying, Testing And Commissioning Of Clear Water Pipeline To Gaudaput Industrial Area In The District Of Khordha.
Tender Value
33.09 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
12 days left
EMD
33097
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing, Laying, Testing And Commissioning Of Clear Water Pipeline To Gaudaput Industrial Area In The District Of Khordha.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work : |
| 2 | Earth work in all kinds of soil mixed with stone boulders not exceeding 0.014 cum in volume within 50m initial lead & following lifts including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department. |
| 3 | Exavaction of pipe line trench in laterite rock or any hard rock(other than granite or disintegrated rock)removed by mechanical means including dressing and levelling and benching the bed not exceeding 1.50 depth & depositing the soil within intial lead of 50m & as per specification approved by the department. |
| 4 | Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, taxes, royality, loading & unloading as per specification & direction of EIC. |
| 5 | Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC. |
| 6 | Providing all materials, labour, T&P for laying of centrifugally cast (Spun) Ductile Iron pressure pipes for water works purpose with socket & spigot ends confirming to IS-8329/2000 with 3rd revision in standard lengths for classification K-9 suitable for push on joints (Rubber Gasket 'D' jointing) with outside zinc coating as per IS-8329/2000 including aligning the pipes inside trench as per IS-12288/1987 including testing the pipe line with required water pressure as per IS-8329/2000 amendment 1st, Sep. 2011 etc. All complete as per specification & direction of EIC (Excluding cost for earth work, jointing of specials, rubber gasket & fittings which shall be paid separately). |
| 7 | 100 mm Dia D.I K-9 Pipe |
| 8 | 250 mm Dia D.I K-9 Pipe |
| 9 | Providing all labour, T&P and making push-on joint with rubber gasket ring as per IS-5382/1985 1st Revision suitable for D.I pipe and fittings of the following nominal dia including testing of the joints with required water pressure (The cost is inclusive of cost of ring) and all complete as per specification & direction of E.I.C. |
| 10 | Labour only for Pipes |
| 11 | 100mm Dia D.I K-9 Pipe |
| 12 | 250mm Dia D.I K-9 Pipe |
| 13 | Material with labour (For fittings) |
| 14 | 100mm Dia D.I K-9 Pipe |
| 15 | 250mm Dia D.I K-9 Pipe |
| 16 | Providing all materials, labour, T&P and laying in trenches following D.I fittings & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. confirming to IS-9523:2000, 1st revision with pressure rating PN-1.0 of following nominal diameter, all complete including test the joints with required water pressure as per specification & direction of EIC. (Excluding cost of earth work in trenches, back filling & rubber gasket) |
| 17 | 100mm x 90° DI Bend |
| 18 | 100mm dia. DI MJ Collar |
| 19 | 150mm x 100 mm dia flangeTee |
| 20 | 100mm x 100 mm dia A/S Tee |
| 21 | 100 mm DI Flanged socket |
| 22 | 100 mm DI Flanged spigot |
| 23 | 250mm x 100 mm dia flangeTee |
| 24 | 250mm dia. DI MJ Collar |
| 25 | 150mm dia. DI MJ Collar |
| 26 | Providing, fitting & fixing of following size valves as per IS specifications including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. (Make :-Kirloskar / Vag/ Audco) |
| 27 | 100mm dia D.I Sluice valve (Non rising spindle) of PN-1.6 as per IS-14846/2000 with ISI mark. |
| 28 | 250mm dia D.I Sluice valve (Non rising spindle) of PN-1.6 as per IS-14846/2000 with ISI mark. |
| 29 | Providing, fitting & fixing of following size single air valve as per IS 14845:2000 ,specifications including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint,MS pipe, flange & flange joint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. |
| 30 | 25 mm dia. DI Tamper proof kinetic air valve (single air valves) |
| 31 | Providing all materials, labour T&P for laying of following dia MS pipes conforming to IS 3589 including transportation loading and unloading & lowerring in trenches .(The pipes shall be painted with two or more coats of approved anticorrosive Epoxy paint of approved shade ) and aligning the pipes below/ above the ground level as per site condition.Earth work excavation in all kinds of soil/ rock of required depth and width, back filling, dewatering wherever necessary, shoring and shutting etc. for the work The cost inclusive of all taxes, duties, transportation, hire & running charges of machineries, POL, to & fro charges with all consumables etc. including testing the joint with required water pressure etc all complete as per specification and direction of EIC. |
| 32 | 114.3 mm OD M.S Pipe (6.3 mm th.) |
| 33 | 273 mm OD M.S Pipe (6.3 mm th.) |
| 34 | Providing all materials, labour T&P for gas cutting of 8mm thick MS Pipe by oxygen and acetylene gas flame, fitting and setting as per required size to IS specification and electrodes confirming to IS specification after \\"V\\" grove cutting including cost of hire and running charges of generator set etc |
| 35 | Providing all materials, labour T&P for Welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings at site or Welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site including cost of hire and running charges of welding generator set etc |
| 36 | Providing all materials, labour, T&P for fixing MS flanges suitable for following dia MS pipe including cutting the pipes by oxygen and acetylene gas flames as per the required size and slope and electric welding the same with the pipes as per IS specification including cost for hire and running charges of all machine with POL. (The flanges shall be made out of following thickness plate after cutting as per required size and shape, drilling of bolt holes as per IS specification, painting the same with two or more coats of anti corrosive paint (Epoxy), the cost inclusive of hire & running charges of machineries, POL, To & Fro charges with all consumables, testing of the joints with required water pressure etc. all complete as per specification and direction of EIC. |
| 37 | MS Flange suitable for 114.3mm OD MS Pipe (10 mm thick) |
| 38 | MS Flange suitable for 114.3mm OD MS Pipe (10 mm thick) |
| 39 | Providing all materials, labour,T&P for making following flange joints with the pipes & fittings, including supply of required and approved sizes of carbon steel nuts & bolts, washer,nitrile rubber gasket & paints etc, testing the joints with required water pressure etc all complete as per specification and direction of EIC. |
| 40 | 100mm dia Flange Joint |
| 41 | 150 mm dia Flange Joint |
| 42 | Providing all materials, labour and T&P required for construction of Flyash Brick valve chamber of following minimum size having minimum cube strength 250Kg/cm²at 28 days confirming to IS-456/2000 and IS-3370 at all locations & heights using graded H.G. stone aggregate (crusher broken ) of 20mm & down size including machine mixing, lifting, conveying, placing in position, mechanical consolidation, curing, dewatering, if necessary, including cost for rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel centering materials with all bracing, ties, anchorage & supports & removing the same after required interval from the date of casting, the minimum thickness of RCC base slab, all side walls and roof slab shall be not less than 200mm, 150mm and 125mm respectively,Providing & Placing MS reinforcement (HYSD bars) of required dia including cutting, bending, binding, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires 18 to 20 gauge soft drawn & cold annealed. PCC 1:3:6 with 40mm size h.g. stone metal (crusher broken) of 100mm thick, earth work excavation in all kinds of soil/rock including back filling duly watered & rammed as per approved design & drawing and fixing pre-cast factory made RCC man hole cover with frame of clear opening of 600mmx450mm and providing and fixing of Polypropylene Steel Reinforced Man Hole stps of approved quality and size in two parallel lines of 300mm spacing in vertical walls with center to center 375mm(staggered).Painting the chamber with 2 (two) or more coats of approved water proofing cement paint over a coat of cement wash. Printing and writing the wall sign board of approved size and specification including cost of all materials, labour, T&P, royalties, all taxes and hire & running charges of machineries with POL etc. all complete as per specification & direction of EIC. |
| 43 | Inner size 1000mm x 1000mm x 1500mm height valve chambers |
| 44 | Construction of RCC M-20 thrust block of following minimum size having minimum cube strength 200Kg/cm²at 28 days confirming to IS-456/2000 and IS-3370 at all locations & heights using graded H.G. stone aggregate (crusher broken ) of 20mm & down size including machine mixing, lifting, conveying, placing in position, mechanical consolidation, curing, dewatering, if necessary, including cost for rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel centering materials with all bracing, ties, anchorage & supports & removing the same after required interval from the date of casting, Providing & Placing MS reinforcement (HYSD bars) of required dia including cutting, bending, binding, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires 18 to 20 gauge soft drawn & cold annealed, PCC 1:3:6 with 40mm size h.g. stone metal (crusher broken) of 100mm thick earth work excavation in all kinds of soil/rock including back filling duly watered & rammed as per approved design & drawing etc. all complete as per specification & direction of EIC. |
| 45 | RCC Thrust block of size 1000mm x 1000mm x 1000mm height |
| 46 | RCC Thrust block of size 500mm x 500mm x 500mm height |
| 47 | Providing, laying and jointing RCC NP4 jacking pipe (with steel pushing collar) with suitable leak proof joints (with using `12mm MDF sheets etc.) with compliance for maintaining slope as per design by trenchless method adopting Micro tunnelling method or any suitable mechanical technology below ground at all depth under running traffic condition including carrying out survey work at the job site for determining underground cable trenches like telephone, power cable, water & sanitary lines and resistivity tests for finding the soil strata using necessary equipment’s for completion of work, mobilizing of machineries and specialized crew at the job site, etc. complete in all respects, including excavation of drive pit and exit pit (upto 3 metre depth) with proper protection at the three sides, providing and casting of MS cutting edges for front shield and constructing thrust bed at designed level as directed by the Engineer, necessary de-watering and providing concrete foundations at the base of the Drive pit, crane for handling of pipes, and any other machinery, tool & tackles required, construction of temporary works as per requirement complete in all respect (all depths) with all lead and lifts, as per specification and the direction of the Engineer. Note- 1. Manual Pipe jacking is not permitted for workmen safety reasons. 2. Length of pipe shall be measured in between the outer wall of two manholes / Inspection chambers. Pipe in the manhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable. |
| 48 | 200mm dia RCC Pipe |
| 49 | Supply and Installation of RCC Precast water pipeline Route marker of foundation size 450mm x 250mm & marking board size 850mm x 300mm including transportation from site/tent, excavation, refilling, disposing of malba, flooding with water, ramming/compacting of foundation as per specifications and drawing. |
| 50 | Supply and Install of cable Route marker |
| 51 | GST will be paid Extra as per Applicable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender