Tender For Day To Day Maintenance Of Administrative Cum Academic Block, Officers & Trainees Hostel, Electrical Sub- Station, T.E. Building , Store, And Staff Quarters At Arttc C Us At Ranchi ( Period :- Fy 2026-27, For Twelve Months).
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Jul 2026
7 days left
EMD
15933
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance Of Administrative Cum Academic Block, Officers & Trainees Hostel, Electrical Sub- Station, T.E. Building , Store, And Staff Quarters At Arttc C Us At Ranchi ( Period :- Fy 2026-27, For Twelve Months).
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 3 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 4 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
| 5 | (a)30 mm thick pre laminated PVC door shutters |
| 6 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : |
| 7 | (a) 4.0 mm thick glass panes |
| 8 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge. |
| 9 | (a) Orissa pattern W.C Pan of size 580x440 mm |
| 10 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 11 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 12 | With stainless steel cover plate minimum 1.25 mm thickness. |
| 13 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 14 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 15 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 16 | 510x1040 mm bowl depth 200 mm. |
| 17 | supplying & stacking of nickel plated S.S.pipe curtain rods with nickel plated brackets & screws |
| 18 | (a) 20 mm dia ( heavy type ) |
| 19 | supplying & stacking of nickel plated S.S.pipe curtain rods with nickel plated brackets & screws |
| 20 | (a) 25 mm dia ( heavy type ) |
| 21 | Supplying and stacking of oxidised M.S.Brackets for M.S.pipecurtain rod with necessary screws etc complete |
| 22 | 20 mm dia |
| 23 | Supplying and stacking of oxidised M.S. Casement stays (Straight peg type) with necessary screws etc complete |
| 24 | 250 mm weight not less than 150 gms. |
| 25 | Supplying and stacking M.S. Handle for steel window |
| 26 | 100 mm size weighing not less than 80 gms. |
| 27 | Supplying and stacking of CP Brass waste for shink or wash basin |
| 28 | 32 mm dia |
| 29 | Supplying and atacking of toilet paper holder of approved quality |
| 30 | C.P. Brass |
| 31 | Supplying and stacking of 15 mm nominal bore C.P. Brass Mixer pillar taps for wash basin of approved quality. |
| 32 | Supplying and stacking Mirror of supirior glass (of approved quality) with plastic moulded frame and hard board backing including screws etc complete |
| 33 | Rectangular shape 453X357 mm |
| 34 | Supplying and stacking stainless steel hinges of approved quality with stainless steel screws all complete as per direction of Engineer-in-Charge. |
| 35 | 100X58X1.90 mm |
| 36 | 125X64X1.90 mm |
| 37 | Supplying and stacking of aluminium hanging floor door Twin rubber stopper of approved quality. |
| 38 | Supplying and stacking of P.V.C. low level flushing cistern with manually controlled device (handle lever). (a) 10 litre capacity-White. |
| 39 | Supplying and stacking of P.V.C. cover for PVC water tank of approved quality. |
| 40 | Supplying and stacking Putty |
| 41 | Supplying and stacking Semi rigid PVC waste pipe 50 mm dia with length not less than 700 mm i/c PVC waste fittings. |
| 42 | Supplying and stacking Semi rigid PVC waste pipe 32 mm dia with length not less than 700 mm i/c PVC waste fittings. |
| 43 | Supplying and stacking Semi rigid PVC waste pipe 40 mm dia with length not less than 700 mm i/c PVC waste fittings. |
| 44 | Supplying and stacking flexible PVC waste pipe 32 mm dia with length not less than 700 mm i/c PVC waste fittings. |
| 45 | Supplying and stacking of 15 mm nominal bore and 45 cm length P.V.C. connection pipe with PTMT Nuts. |
| 46 | Supplying and stacking of 15 mm nominal bore PTMT Swiveling shower of approve quality and make. |
| 47 | Supplying and stacking PTMT ball cock of approve quality and make with Epoxy coated aluminium road with L.P./H.P.HD plastic ball |
| 48 | (a) 40 mm nominal bore, 206 mm long, weighing not less than 690 gms. |
| 49 | Supplying and stacking PTMT bib cock 15mm nominal bore weighing not less than 88 gms. |
| 50 | Supplying and stacking PTMT Pillar cock 15mm nominal bore weighing not less than 110 gms. |
| 51 | Supplying and stacking PTMT stop cock 15mm nominal bore weighing not less than 88 gms. |
| 52 | Supplying and stacking PTMT Towel rail with brackets, screws and concealed fittings of approved quality. |
| 53 | 600 mm long |
| 54 | Supplying and stacking C.P. Brass Pillar cock 15mm nominal bore weighing not less than 650 gms. |
| 55 | Supplying and stacking of C.P. Brass bib cock of approved quality |
| 56 | 15 mm nomonal bore |
| 57 | Supplying and stacking Brass bib cock 15mm nominal bore. |
| 58 | Supplying and stacking of PVC washer for low level flushing cistern of approved quility. |
| 59 | Supplying and stacking of PVC washer for brass bib cock/ stop cock/ pilar cock of approved quility. |
| 60 | Supplying ofr PVC W.C flushing cistern kit with ball cock of approved quality as per direction of Engineer-in-Charge. |
| 61 | Supplying and stacking PVC and steel waste 100 mm for Kitchen sink. |
| 62 | Supplying and stacking PVC 100 mm dia nahani trap |
| 63 | Supplying and stacking PVC hand faucet |
| 64 | Supplying and stacking gun metal gate valve with CI wheel of approved quality (Screwed end) |
| 65 | 25 mm nominal bore |
| 66 | Supplying and stacking G.I. Nipple 15mm dia 70 mm long. |
| 67 | Supplying and stacking G.I. Nipple 15mm dia 90 mm long. |
| 68 | Supplying and stacking G.I. Nipple 15mm dia 120 mm long. |
| 69 | Supplying and stacking G.I. Nipple 15mm dia 150 mm long. |
| 70 | Supplying and stacking G.I. Elbow 15mm dia. |
| 71 | Supplying and stacking G.I. Tee 15mm dia. |
| 72 | Supplying and stacking G.I. Socket 15mm dia. |
| 73 | Supplying and stacking Brass Spendal for Pillar cock, stop cock and bib cock. |
| 74 | Supplying and stacking Brass Spendal for Concealed stop cock cock. |
| 75 | Supplying and stacking of white cement of approved quility (In 1/2 Kg Pack). |
| 76 | Supplying and stacking of CPVC pipe 20 mm nominal outer dia of approved quility. |
| 77 | Supplying and stacking of CPVC pipe 25 mm nominal outer dia of approved quility. |
| 78 | Supplying and stacking of CPVC pipe 40 mm nominal outer dia of approved quility. |
| 79 | Supplying and stacking of CPVC pipe fittings of approved quility: |
| 80 | (a) Union |
| 81 | (i) 20 mm nominal bore |
| 82 | (ii) 25 mm nominal bore |
| 83 | (iii) 40 mm nominal bore |
| 84 | (b) FTA (Brass Insert) |
| 85 | (i) 20 mm nominal bore |
| 86 | (ii) 25 mm nominal bore |
| 87 | (iii) 40 mm nominal bore |
| 88 | (c ) MTA (Brass Insert) |
| 89 | (i) 20 mm nominal bore |
| 90 | (ii) 25 mm nominal bore |
| 91 | (iii) 40 mm nominal bore |
| 92 | (d) Pipe Clip |
| 93 | (i) 20 mm nominal bore |
| 94 | (ii) 25 mm nominal bore |
| 95 | (iii) 40 mm nominal bore |
| 96 | (e) F.Th. Elbow (Brass Insert) |
| 97 | (i) 20 mm nominal bore |
| 98 | (ii) 25 mm nominal bore |
| 99 | (f) F.Th. Tee (Brass Insert) |
| 100 | (i) 20 mm nominal bore |
| 101 | (ii) 25 mm nominal bore |
| 102 | (g) Coupler |
| 103 | (i) 20 mm nominal bore |
| 104 | (ii) 25 mm nominal bore |
| 105 | (iii) 40 mm nominal bore |
| 106 | Supplying and stacking of CPVC Ball Valve (Gate valve) of approved quility: |
| 107 | (i) 20 mm nominal bore |
| 108 | (ii) 25 mm nominal bore |
| 109 | (iii) 40 mm nominal bore |
| 110 | Supplying and stacking of CPVC Tank connector long of approved quility: |
| 111 | (i) 25 mm nominal bore |
| 112 | (ii) 32 mm nominal bore |
| 113 | (iii) 40 mm nominal bore |
| 114 | Cleaning of sewer lines i/c removing & disposal of sludge upto municipal dumping ground as per direction of Engineer-in-charge. |
| 115 | Cleaning of open surface drain of size upto 400mm wide and 750mm deep & sprinkle of bleaching powder around the drain i/c removing & disposal of sludge upto dumping ground in the campus as per direction of Engineer-in-charge. |
| 116 | Credit for old unserviceable dismentled materials:- |
| 117 | (a) P.V.C. low level flushing cistern with manually controlled device (handle lever). (a) 10 litre capacity-White. |
| 118 | (b) PTMT ball cock 40 mm |
| 119 | (c ) PTMT bib cock, stop cock and Pillar cock 15mm nominal bore |
| 120 | (d) C.P. Brass Pillar cock 15mm nominal bore |
| 121 | (e) Brass bib cock 15mm nominal bore. |
| 122 | (f) Brass Spendal for Pillar cock, stop cock and bib cock. |
| 123 | (g) Brass Spendal for Concealed stop cock cock. |
| 124 | (h) GI Pipe 15 mm nominal bore |
| 125 | (i) GI Pipe 20 mm nominal bore |
| 126 | (j) GI Pipe 25 mm nominal bore |
| 127 | (k) GI Pipe 40 mm nominal bore |
| 128 | (l) PTMT ball cock 25 mm |
| 129 | (m) PTMT ball cock 50 mm |
| 130 | Providing services for attending day to day plumbing related maintenance work in BSNL Telecom buildings, staff Quarters etc. at ARTTC Campus Ranchi by attending complaints, such as fixing / replacing bib cock, stop cock, pillar cock, PVC connection etc and repair of all fittings as per direction of Engineer in Charge. All T & P has to be arranged by the contractor consumable material like pipe, fittings etc will be paid separately .( Note:- one number Plumber should be engage per day). |
| 131 | Providing services for attending day to day Carpenting related maintenance work in BSNL Telecom buildings, staff Quarters etc. at ARTTC Campus Ranchi by attending complaints such as repair of doors /window fittings etc as per direction of engineer-in-charge. All T&P has to be arrange by contractor consumable material like tower bolt, handle, sliding door bolt, stey, window fastener) will be paid separately . Carpenter/ Aluminium Mistry will be supplied whenever is requaired as intimated by JTO/SDE (Civil) in one day advance. |
| 132 | Providing services for attending day to day sweepering related maintenance work such as cleaning of manholes chambers in BSNL Telecom buildings, staff Quarters etc. at ARTTC Campus Ranchi, as per direction of Engineer in Charge. All T & P and labours has to be arranged by contractor. (Consumable materials such as C. I. Manhole cover, pipes will be paid separately. Sweeper will be supplied whenever is requaired as intimated by JTO/SDE in one day advance. |
| 133 | Providing services for attending day to day maintanance work for major complain as and when required as per the direction of Engineer - in Charge. All T&P has to be arrange by the Agency. |
| 134 | Beldar/Coolie |
| 135 | Providing services for attending day to day nature of general maintanance work in ARTTC Campus Ranchi like cleaning of campus by cutting grasses, bushes etc. and other misc. work as and when required and as directed by higher authority by engaging the Coolie / Bedar with in the ARTTC Campus, Ranchi. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender