Tender For Modernization Of Tiger Enclosure In Aazp, Range-I, Vandalur, During 2026-27
Tender Value
76.17 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
6 days left
EMD
76200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modernization Of Tiger Enclosure In Aazp, Range-I, Vandalur, During 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of old chain link in inner portion by using Head mazdoor |
| 2 | Dismantling of old chain link by using Welder |
| 3 | HGS SS 20BB Earth work excavating and depositing on bank with initial lead of 10 mt. and initial lift of 2 mts in Hard stiff clay, stiff block cotton hard red earth and earth mixed with small size boulders and hard gravelly soil SS 20 B (Item No-W-0061) |
| 4 | Supply and filling M-sand in foundation |
| 5 | Providing Plain cement concrete 1:4 8 using 40mm metal jelly for foundation |
| 6 | Supplying fabricating and placing in position mild steel plain or RTS bars as detailed below for all RCC works inclusive of cost of steel and binding wire (steel) bar alone shall be supplied departmentally at site of work and cost thereof recovered at issued rate (Sl. No. 134) |
| 7 | Supply and erecting steel centering including necessary support for plain surface in foundation and basement for reinforced cement concrete works such as column footing, plinth beam, grae beam, bed block etc., which require only normal strutting using MS sheet of size 90cmx60cm and BG 10 guage of stiffened with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak joists of size 10mm 6.5cm (spaced at about 90cm C/C) etc. complying with standard specification. |
| 8 | Cement Concrete 1:2:4 (One Cement, Two crushed stone sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including Super Plasticiser, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three |
| 9 | Supply and fixing of Stainless Steel 304 Grade Equal Angle section of size 75 x 75 x 5 mm, including cutting, drilling, welding, grinding. polishing, fixing with necessary SS fasteners, anchor bolts, brackets, consumables, labour, tools and tackles, complete as directed by the Department. |
| 10 | Supply and fixing of SS 304 Grade Flat of size 50 * 8 mm, including cutting, drilling, welding, grinding. polishing, fixing with necessary SS fasteners, consumables, labour, tools and tackles, complete as directed by the Department |
| 11 | Supply and fixing of Stainless Steel 304 Grade Equal Angle section of size 40 * 40 * 5 mm, including cutting, drilling, welding, grinding, polishing, fixing with necessary SS fasteners, anchor bolts, brackets, consumables, labour, tools and tackles, complete as directed by the Department. |
| 12 | Supply of Stainless Steel 304 Grade Chain Link Mesh of 2 ^ prime prime *2^ prime prime (50 mm x 50 mm) mesh size, woven from 8 Gauge (4 mm diameter) SS 304 wire, complete as specified. |
| 13 | Labour charges for fixing of chain |
| 14 | Supply and fixing of Stainless Steel 304 Grade Equal Square section of size 40 * 40 * 5 mm, including cutting, drilling, welding, grinding, polishing, fixing with necessary SS fasteners, anchor bolts, brackets, consumables, labour, tools and tackles, complete as directed by the Department. |
| 15 | Providing, assembling and supplying of laminated glass panels for SKYLIGHT using heat Strengthened clear Glass and toughened glass sandwiched using 1.52PVB layer. The Glass of approved colour, size and shape as required shade all complete for the required performance, as directed by the Engineer in Charge. The heat strengthened clear glass having properties as U value of 4.20 to 5.50 W/m2 or lower degree K etc., Solar heat gain coefficient |
| 16 | Plastering the surface of walls with Cement Mortar 1:4 (One cement and Four plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers |
| 17 | HGS SS 20BB Earth work excavating and depositing on bank with initial lead of 10 mt. and initial lift of 2 mts in Hard stiff clay, stiff block cotton hard red earth and earth mixed with small size boulders and hard gravelly soil SS 20 B (Item No-W-0061) |
| 18 | Providing Plain cement concrete 1:4 8 using 40mm metal jelly for foundation |
| 19 | Supplying fabricating and placing in position mild steel plain or RTS bars as detailed below for all RCC works inclusive of cost of steel and binding wire (steel) bar alone shall be supplied departmentally at site of work and cost thereof recovered at issued rate (SI. No. 134) |
| 20 | Supply and erecting steel centering including necessary support for plain surface in foundation and basement for reinforced cement concrete works such as column footing, plinth beam, grae beam, bed block etc., which require only normal strutting using MS sheet of size 90cmx60cm and BG 10 guage of stiffened with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak joists of size 10mm 6.5cm (spaced at about 90cm C/C) etc. complying with standard specification. |
| 21 | Cement, Two crushed stone sand Cement Concrete 1:2:4 (One and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including Super Plasticiser, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps |
| 22 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Four plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers |
| 23 | Supplying of 1inch UPVC Pipe |
| 24 | Supplying of linch UPVC Coupler |
| 25 | Supplying of linch UPVC Elbow |
| 26 | Supplying of linch UPVC TEE |
| 27 | Supplying of linch UPVC MTA |
| 28 | Supplying of linch Brass Valve |
| 29 | Supplying of 3/4inch Brass Ball Valve |
| 30 | Supplying of 3/4inch MTA UPVC |
| 31 | Supplying of 3/4inch Bush |
| 32 | Supplying of 3/4inch GA Bend |
| 33 | Supplying of UPVC Solution |
| 34 | Labour charge for plumbing (Plumber-I Class) |
| 35 | Supplying and laying of Interlocking Paver Block Stone 60mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers. |
| 36 | For sawyer mill charges for wood turning into wooden planks used for erecting of wooden Ramp including GI nails, hire charges, chainsaw transportation 4\\" and transportation |
| 37 | supplying, fabricating and placing in position using Gl 3\\"x3\\"x3mm thickness square tube |
| 38 | supplying, fabricating and placing in position using GI 2\\"x2\\"x3mm thickness square tube |
| 39 | Painting, Priming coat on new iron work in approved quality of metal primer |
| 40 | Petty iron work for truss, straps etc., (wrought & fixed) labour only |
| 41 | Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span, whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insülation material will be chlorofluoro carbon and hydro chlorofluoro carbon free, high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary lashings such |
| 42 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 43 | Laying cement based hydralically pressed anti skid tiles of approved quality and design 20mm thick laid in cement mortar 1:3 20mm thick and pointed with same coloured cement (20mm thick tiles) (Page 119) |
| 44 | Refilling with excavated earth complying with standard specification for filling in foundation and basement (PWD SSR-W-0074) (P.32) |
| 45 | Random rubble masonary in cement mortar 1:6 for Super structure |
| 46 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender