Tender For General-Pmmsy-General-Pmmsy-Setting Up Of 15 Kld Effluent Treatment Plant At Koyilandy Harbour-General Civil Work-General Civil Work
Tender Value
74.06 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
6 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikode → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Pmmsy-General-Pmmsy-Setting Up Of 15 Kld Effluent Treatment Plant At Koyilandy Harbour-General Civil Work-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Mechanical work |
| 2 | OD9122/2024-2025:Supply and installation of 5mm thick MS Epoxy painted perforated screen, spacing (hole size) 10mm with lifting arrangement, dimension of perforated screen 750 mm width x 900mm height, including cost for conveyance, loading, unloading, fitting charges etc complete as per direction of departmental officer at site |
| 3 | OD9123/2024-2025:Supply and installation of 5mm thick MS Epoxy painted perforated screen, spacing (hole size) 5mm with lifting arrangement, dimension of perforated screen 750 mm width x 900mm height, including cost for conveyance, loading, unloading, fitting charges etc complete as per direction of departmental officer at site |
| 4 | OD9118/2024-2025:Supplying and installation of single belt type oil skimmer, belt MOC polyurethane, 3 phase, 0.18 kW or more, suitable for 15 KLD ETP including cost of all materials, conveyance, loading, unloading, fitting charges etc. complete as per direction of departmental officers at site |
| 5 | OD9114/2024-2025:Supplying and installation of submersible type raw effluent transfer pump, with minimum specification 0.75 m3/hr, at 10meter head, MOC: CI body, SS shaft and Bronze impeller. make Crompton/CRI/Equivalent including cost for conveyance, loading, unloading, fitting charges, connections from power line etc. complete as per direction of departmental officers at site. |
| 6 | OD9121/2024-2025:Supplying and installation of Coagulation tank with Aerated stirrer suitable for 15 KLD ETP including motor and connections from the power line, cost of all materials, conveyance, loading and unloading fitting charges etc complete as per the direction of departmental officers at site. MOC for tank: FRP, Thickness: 8 mm |
| 7 | OD9116/2024-2025:Supplying and installation of Clarifier Tank with mechanism for removing suspended and deposited solid wastes MOC: FRP, Thickness: 10 mm, Dia: 1500 mm, Height: 3000 mm including cost of all materials conveyance, fitting charges, labour charges, loading and unloading etc complete as per the direction of departmental officers at site. |
| 8 | OD9111/2024-2025:Supplying and installation of Intermediate Tank of Capacity: 2.5 KL, MOC: FRP including cost of all materials conveyance, fitting charges, labour charges, loading and unloading etc complete as per the direction of departmental officers at site. |
| 9 | OD9103/2024-2025:Supply and Installation of horizontal centrifugal type Effluent Transfer Pump to transfer effluent from intermediate tank to upflow anaerobic sludge blanket reactor, with Flow rate: 0.75 m3/hr at a head of 10 m, MOC: CA body ,SS shaft and bronze impeller Make: Kirloskar/ CRI/ Equivalent including cost of all materials conveyance, fitting charges, labour charges, loading and unloading etc complete as per the direction of departmental officers at site. |
| 10 | OD9101/2024-2025:Supply and Installation of Outlet Flow Meter, Type - Electromagnetic Digital Flow meter, Make - Aster/Frehnig/UPC/eqv including cost of all materials conveyance, fitting charges, labour charges, loading and unloading etc complete as per the direction of departmental officers at site. |
| 11 | OD9113/2024-2025:Supplying and installation of Dosing Tank (HDPE) of chemical storage of capacity 100 L . MOC -HDPE Make: Sintex/Reno/Equivalent including cost of all materials conveyance, fitting charges, labour charges, loading and unloading etc complete as per the direction of departmental officers at site. |
| 12 | OD9105/2024-2025:Supply Installation Testing and Commissioning of following itemsa. 15 KLD capsule type Primary Equalization Tank, Capacity - 15 KLD, Thickness - 14 mm MOC - FRP, Capsule type, having three chamber partition for (a) Aeration Tank (b) Settling tank and (c) Filter feed tank b. Supply and Installation of Air blower of Type - Magnetic Diaphragm With Power consumption - 0.186 KW and MOC - CA, with Air flow 250 lpm and Noise level <50 dBc. 1 set Standard UPVC type Diffusers installed in the aeration tank suitable for 15 KLD ETP including cost of all materials conveyance, fitting charges, piping, electrical and plumbing works, connections, labour charges, loading and unloading etc complete as per the direction of departmental officers at site. |
| 13 | OD9117/2024-2025:Supplying and installation of dosing Pump with capacity of 0-6 LPH with necessary piping, control cable connections including cost of all materials conveyance, fitting charges, labour charges, loading and unloading etc complete as per the direction of departmental officers at site. |
| 14 | OD9104/2024-2025:Supply and Installation of Air blower of Type - Magnetic Diaphragm With Power consumption - 0.186 KW and MOC - CI. With Specifications, Air flow - 250 lpm and Noise level - <50 dB. |
| 15 | OD9109/2024-2025:Supply and Installation of Diffusers - aeration tank of Type standard UPVC |
| 16 | OD9120/2024-2025:Supplying and installation of Centrifugal Monoblock Filter feed pump 0.75 m3/hr@ 25 meters of liquid columns head. with CI body CI impeller, suitable motor directly coupled to the pump, fitted on common base frame complete in all respects. |
| 17 | OD9119/2024-2025:Supplying and installation of Pressure Sand Filter with FRP vessel having appropriate size with necessary frontal piping, Multi port valves, suitable support for mounting, pressure gauge with filtering media of Sand ,Graded Pebble. MOC FRP, Size 16\\" x 65\\" |
| 18 | OD9110/2024-2025:Supplying and installation of Activated Carbon Filter with FRP vessel having appropriate size with necessary frontal piping, Multi port valve, suitable support for mounting, pressure gauge with filtering media of Activated Carbon (IV : 1050),Graded Pebble. size 16\\" x 65\\". |
| 19 | OD9107/2024-2025: Interconnecting piping works for ETP Supplying. installation, and commissioning of interconnecting piping storks complete as per specification. All necessary pipe works shall be carried out with necessary control walls strainers, NRV and providing gauge meters online whrever necessary as per design. Providing and fixing all interconnecting piping with all required isolation, control valves for making the System complete functional as per site. UPVC/CPVC Valve & Fittings- 3/4\\", 1 and I.5\\".2\\". UPVC/CPVC Pipe- 3/4\\".1',1.5\\" and 2\\". 4\\" Pipe-PVC . NRV-I.5\\". F CPVC PIPE. VALVE AND FITTINGS-' 2\\" Make pipe and fittings - Supreme / Astral/Equivalent (For PVC. UPVC and CPVC) Make NRV -Zolotto/Equivalent |
| 20 | OD9115/2024-2025:Supplying and installation of Self priming Sludge transfer pump 0.5 m3/hr @ 15 meters of water columns head. with CI body,bronze impeller, suitable motor directly coupled to the pump, fitted on common base frame complete in all respects. |
| 21 | OD9100/2024-2025:Supply and Instllation of Sludge Bag System.Type - Electromagnetic Digital Flow meter,Make - Aster/Frehnig/UPC/eq |
| 22 | OD9108/2024-2025:Supply and Installation of Collection Tank of capacity 10 KL MOC - FRP |
| 23 | OD9106/2024-2025:Supply and Installation of Treated Water Tank of Capacity 5 KL MOC FRP |
| 24 | OD9102/2024-2025:Upflow Anaerobic Sludge Blanket Reactor (UASBR) of Dia 2400 mm and Height 5000 mm. MOC- FRP |
| 25 | OD9112/2024-2025:Testing & Commissioning of ETP to make it fully functional with suitable culture media/ cowdung as necessary.Includes 1 month operation after commissioning. |
| 26 | Electrical Work |
| 27 | OD9127/2024-2025:Control Panel for ETPProviding and fixing dust and vermine proof cubical type motor control panel centre for thevarious pumps, blower etc. required. It is fabricated from 2mm thick CRCA sheet with stoveenamelled finish.Make of Switchgear- L&T, Schneider,Siemens, ABBa. One incoming Main Four Pole MCCB with required capacity suitable rating.b. MCB one for each motorc. Fully automatic DOL / star delta starters suitable for different motors / pumps used in the ETP.Up to 7.5 HP DOL may be used and above star/delta starter used with push buttons one for eachmotor and on/ off indicating lamps.d. Single phasing preventer for incoming lines.f. Panel type Digital ampere meters with one set Suitable C.Ts, one for incoming main and onefor each above 7.5 HP motor shall be provided with rotary selector switch to monitor linecurrents.g. Panel type Digital volt meters, on incoming main with rotary selecting switch to monitorvoltage between phase to neutral and phase to phase.h.R,Y&B phase indicating lamp (LED type) with 6A control SP MCB for incoming maini. Rotary switch for manual or auto operation for each pumpj. Fully taped separate aluminum bus bar of required capacity for normal and emergency supply.k. ON, OFF, TRIP Indication (LED type).l. The panel shall be pre-wired with coded wiring. All interconnecting wiring from incomingmain to switchgear, meters and accessories within the switchboard panel shall have suitablecopper ferrules per relevant IS Make - As per OEM approved standard and as per relevant IS and after getting schematic diagram pre-approval from HED |
| 28 | OD9124/2024-2025:Control Panel for Collection sump Transfer pumpsProviding and fixing dust and vermine proof cubical type motor control panel centre for theTransfer pumps.Make of Switchgear- L&T, Schneider,Siemens, ABBa. One incoming Main Four Pole RCCB with required capacity suitable rating.b. MCB one for each motorc. Fully automatic DOL / star delta starters suitable for different motors / pumps used in the ETP.Up tod. Rotary switch for manual or auto operation for each pumpf. Fully taped separate Aluminium bus bas per relevant as required capacity for normal and emergency supply.Make - As per OEM approved standard as per relevant IS and after getting schematic diagram pre-approval from HED |
| 29 | OD9125/2024-2025:Electrical works for Collection sump Transfer pumpsElectrical works(including supply, installation and termination of cables of suitable size as perHP of all pumps with all structural supports, clamps and cable trays as per approveddesign/specifications, installation will be as per relevant Indian standard and CPWDspecification along with control cable of suitable size).(l lot). Any other electrical andmechanical item required to complete the work.Make - Gloster/ Finolex/ RR Kabel |
| 30 | OD9128/2024-2025:Providing and fixing kwhr meter with meter box and complete in all respects.Make - L&T, Schneider ,SEIMENS |
| 31 | OD9126/2024-2025:EarthingDesign, supply, installation and commissioning of Overall earthing system for majorelectrical equipment in ETP and MCC Room such as pumps, motors and outdoorlighting.Providing maintenance-free chemical earth pits and connecting them to the panels.copper wire of size 10swg for earthing all the pumps and motors to the nearest earth bar (2 runsfor each motor/pump). Chemical earth pits:- Electrode:anti corrosive copper bonded MS rod,Electrode size: minimum 10 mm dia rod with 1m length, Electrode coating: copper coating ofminimum 250 microns, Make of Electrode and backfillCompound: JK Earthing Electrodes, Bharath Copper or Equivalent, Back fill compound: JKReslow, or Equivalent |
| 32 | OD9129/2024-2025:Electrical works(including supply, installation and termination of cables of suitable size as perHP of all pumps with all structural supports, clamps and cable trays as per approveddesign/specifications, installation will be as per relevant Indian standard and CPWDspecification along with control cable of suitable size).(l lot). Any other electrical andmechanical item required to complete the work.Make - Gloster/ Finolex / RR Kabel |
| 33 | OD9728/2024-2025:25 mm 4 core PVC/XLPE insulated armoured cable with aluminium conductor for working voltages up to and including 1100 volts conforming IS 1584/part 1/ 1988 for PVC IS 7098part 1 for XLPE from end of auction hall through the sand portion to the control panel of ETP. |
| 34 | OD9729/2024-2025:PVC insulated and PVC sheathed armoured aluminium power cable 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60 cms, making good the damages, colour washing etc. as required, 4 core 25 square mm with factory made clamp from centre of the auction hall where electrical control room is set to the end of auction hall. |
| 35 | General- Civil Work |
| 36 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 37 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 38 | 50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete |
| 39 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 40 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 41 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 42 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 43 | 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 44 | 2.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil |
| 45 | 60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 46 | 50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood |
| 47 | 9.74.2:Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:200x10 mm |
| 48 | Fensing Work |
| 49 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 50 | 4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 51 | 16.19:Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. |
| 52 | 16.70.2:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade |
| 53 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 54 | Roof Work |
| 55 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 56 | 50.12.2.1:Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required. |
| 57 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 58 | New Drain to Collection tank |
| 59 | 11.4.1.1:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I. P.C.C grade M 10 (i) Nominal mix 1:3:6 |
| 60 | 11.4.4:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 IV. R.C.C grade M 20 |
| 61 | 11.8:Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 |
| 62 | 2.5.1.C:Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202. (I) By Manual Means (C) Reinforced Cement Concrete |
| 63 | NP2 pipe - treated water collection tank to basin |
| 64 | 19.6.4:Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:300 mm dia R.C.C. pipe |
| 65 | Operation and Maintenance |
| 66 | OD9099/2024-2025:Operation and Maintenance charge for 3 year of ETP with all materials charge, labour charge, regular inspection of pumps and motors, cleaning, lubrication, routine water quality check, replacing worn out/damaged components, implementing all safety measures, running of the whole plant etc. complete as per direction of departmental officers at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender