Tender For General-Pmmsy-Supply And Installation Of 15 Kld Effluent Treatment Plant At Puthiyappa Harbour, Kozhikode.-General Civil Work
Tender Value
65.16 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
6 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikode → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Pmmsy-Supply And Installation Of 15 Kld Effluent Treatment Plant At Puthiyappa Harbour, Kozhikode.-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Mechanical work |
| 2 | OD10454/2024-2025:Supply and installation of 5 mm thick MS Epoxy painted perforated screen spacing (hole size ) with 10mm with lifting arrangement , dimension of perforated screen750 mm width x 900mm height including cost for conveyance, loading , unloading,fitting charges etc complete as per directions of department officer at site. |
| 3 | OD10449/2024-2025:Supply and installation of 5 mm thick MS Epoxy painted perforated screen spacing (hole size ) with 5mm with lifting arrangement , dimension of perforated screen750 mm width x 900mm height including cost for conveyance, loading , unloading,fitting charges etc complete as per directions of department officer at site. |
| 4 | OD10444/2024-2025:Supplying and installation of single belt type oil skimmer, belt MOC polyurethane, 3 phase motor with 0.18kW or more suitable for 15KLD ETP including cost of all materials, conveyance, loading , unloading,fitting charges etc complete as per directions of department officer at site. |
| 5 | OD10460/2024-2025:Supplying and installation of submersible type raw effluent transfer pump, with minimum specification 0.75 m3/hr, 10meter head, MOC : CI body, SS shaft and Bronze impeller , make Crompton / CRI/Equivalent including cost for conveyance, loading , unloading,fitting charges, connections from power line etc. complete as per directions of department officer at site. |
| 6 | OD10448/2024-2025:Supplying and installation of Coagulation tank with Aerated stirrer suitable for 15 KLD ETP including motor and connections from the power line , cost of all materials , conveyance, loading , unloading,fitting charges, connections from power line etc. complete as per the directions of department officer at site. MOC for Tank : FRP,Thickness: 8mm. |
| 7 | OD10447/2024-2025:Supplying and installation of Clarifier Tank with mechanism for removing suspended and deposited solid wastes , MOC: FRP, Thickness: 10 mm, Dia: 1500 mm, Height: 3000 mm including cost of all materials , conveyance,fitting charges, labour charges ,loading , unloading etc complete as per the directions of department officer at site. |
| 8 | OD10462/2024-2025:Supplying and installation of Intermediate Tank of Capacity: 2.5 KL, MOC : FRP including cost of all materials , conveyance,fitting charges, labour charges ,loading , unloading etc complete as per the directions of department officer at site. |
| 9 | OD10446/2024-2025:Supply and Installation of horizontal centrifugal type Effluent Transfer Pump to transfer effluent from intermediate tank to upflow anaerobic sludge blanket reactor, withFlow rate: 0.75 m3/hr at a head of 10 m, MOC : CA body ,SS shaft and bronze impeller Make: Kirloskar/ CRI/Equivalent including cost of all materials , conveyance,fitting charges, labour charges ,loading and unloading etc complete as per the directions of department officer at site. |
| 10 | OD10442/2024-2025:Supply and Installation of Outlet Flow Meter Type - Electromagnetic Digital flow meter Make - Aster/Frehnig/UPC/eqv including cost of all materials , conveyance,fitting charges, labour charges ,loading and unloading etc complete as per the directions of department officer at site. |
| 11 | OD10456/2024-2025:Supplying and installation of Dosing Tank (HDPE) of chemical storage of capacity 100 L . MOC -HDPE Make: Sintex/Reno/Equivalent including cost of all materials , conveyance,fitting charges, labour charges ,loading and unloading etc complete as per the directions of department officer at site. |
| 12 | OD10457/2024-2025:Supply Installation Testing and Commissioning of following itemsa. 15 KLD capsule type Primary Equalization Tank,Capacity - 15 KLD,Thickness - 14mm , MOC- FRP Capsule type,having three chamber partition for (a) aeration tank (b) Settling tank and (c) Filter feed tank.b. supply and installation of Air blower of type - magnetic diaphram with power consumption- 0.186 KW and MOC - CA,with Air flow 250 lpm and Noise level <50 dBc. 1 set standard UPVC type Diffusers installed in the aeration tank suitable for 15 KLD ETP. including cost of all materials , conveyance,fitting charges, piping , electrical and plumbing works , connections labour charges ,loading and unloading etc complete as per the directions of department officer at site. |
| 13 | OD10455/2024-2025:Supplying and installation of dosing Pump best industry with capacity of 0-6 LPH with necessary piping, control cable connections including cost of all materials , conveyance,fitting charges, labour charges ,loading and unloading etc complete as per the directions of department officer at site. |
| 14 | OD10452/2024-2025:Supply and Installation of Air blower best of industry make of Type - Magnetic Diaphragm With Power consumption - 0.186 kW and MOC - CA. With specifications Air flow - 250 lpm, pressure and Noise level <50 dB . |
| 15 | OD10443/2024-2025:Supply and Installation of best industry make Diffusers - aeration tank of Type standard UPVC |
| 16 | OD10441/2024-2025:Supplying and installation of Centrifugal Monoblock Filter feed pump , 0.75 m3/hr @ 25 meters of liquid columns head. with CI body, CI impeller, suitable motor directly coupled to the pump, fitted on common base frame complete in all respects. |
| 17 | OD10445/2024-2025:Supplying and installation of Pressure Sand Filter with FRP vessel having appropriate size with necessary frontal piping, Multi port valves, suitable support for mounting, pressure gauge with filtering media of Sand ,Graded Pebble. MOC FRP, Size 16" x 65" . |
| 18 | OD10459/2024-2025:Supplying and installation of Activated Carbon Filter with FRP vessel having appropriate size with necessary frontal piping, Multi port valve, suitable support for mounting, pressure gauge with filtering media of Activated Carbon (IV : 1050),Graded Pebble. size 16" x 65". |
| 19 | OD10440/2024-2025: Interconnecting piping works for ETP Supplying installation, and commissioning of interconnecting piping storks complete as per specification. All necessary pipe works shall be carried out with necessary control walls strainers, NRV and providing gauge meters online wherever necessary as per design. Providing and fixing all interconnecting piping with all required isolation, control valves for making the System complete functional as per site. UPVC/CPVC Valve & Fittings- 3/4\\", 1 and I.5\\".2\\". UPVC/CPVC Pipe- 3/4\\".1',1.5\\" and 2\\". 4\\" Pipe-PVC . NRV-I.5\\". F CPVC PIPE. VALVE AND FITTINGS-' 2\\" Make pipe and fittings - Supreme / Astral/Equivalent (For PVC. UPVC and CPVC) Make NRV -Zolotto/Equivalent . |
| 20 | OD10451/2024-2025:Supplying and installation of Self priming Sludge transfer pump , 0.5 m3/hr @ 15 meters of water columns head. with CI body, bronze impeller, suitable motor directly coupled to the pump, fitted on common base frame complete in all respects. |
| 21 | OD10463/2024-2025:Supply and Installation of Sludge Bag System.Type-Electromagnetic Digital Flow meter, Make - Aster/Frhnig/UPC/eqv. |
| 22 | OD10458/2024-2025:Supply and Installation of Collection Tank of capacity 10 KL MOC - FRP. |
| 23 | OD10461/2024-2025:Supply and Installation of Treated Water Tank of Capacity 5 KL MOC FRP . |
| 24 | OD10450/2024-2025:Up flow Anaerobic Sludge Blanket Reactor (UASBR) of Dia 2400 mm and Height 5000 mm MOC- FRP. |
| 25 | OD10453/2024-2025:Testing & Commissioning of ETP to make it fully functional with all necessary certifications and documentations |
| 26 | Electrical Work |
| 27 | OD10470/2024-2025:Control Panel for ETPProviding and fixing dust and vermine proof cubical type motor control panel centre for thevarious pumps, blower etc. required. It is fabricated from 2mm thick CRCA sheet with stoveenamelled finish.Make of Switchgear- L&T, Schneider,Siemens, ABBa. One incoming Main Four Pole MCCB with required capacity suitable rating.b. MCB one for each motorc. Fully automatic DOL / star delta starters suitable for different motors / pumps used in the ETP.Up to 7.5 HP DOL may be used and above star/delta starter used with push buttons one for eachmotor and on/ off indicating lamps.d. Single phasing preventer for incoming lines.f. Panel type Digital ampere meters with one set Suitable C.Ts, one for incoming main and onefor each above 7.5 HP motor shall be provided with rotary selector switch to monitor linecurrents.g. Panel type Digital volt meters, on incoming main with rotary selecting switch to monitorvoltage between phase to neutral and phase to phase.h.R,Y&B phase indicating lamp (LED type) with 6A control SP MCB for incoming maini. Rotary switch for manual or auto operation for each pumpj. Fully taped separate aluminum bus bar of required capacity for normal and emergency supply.k. ON, OFF, TRIP Indication (LED type).l. The panel shall be pre-wired with coded wiring. All interconnecting wiring from incomingmain to switchgear, meters and accessories within the switchboard panel shall have suitablecopper ferrulesMake - As per OEM approved and as per relevant IS, schematic diagram has to be pre approved from HED |
| 28 | OD10467/2024-2025:Control Panel for Collection sump Transfer pumpsProviding and fixing dust and vermine proof cubical type motor control panel centre for theTransfer pumps.Make of Switchgear- L&T, Schneider,Siemens, ABBa. One incoming Main Four Pole RCCB with required capacity suitable rating.b. MCB one for each motorc. Fully automatic DOL / star delta starters suitable for different motors / pumps used in the ETP.Up tod. Rotary switch for manual or auto operation for each pumpf. Fully taped separate Aluminium bus bar of required capacity for normal and emergency supply.Make - As per OEM approved standard as per relevant IS and aft4er getting schematic diagram approval from HED |
| 29 | OD10466/2024-2025:Electrical works for Collection sump Transfer pumpsElectrical works(including supply, installation and termination of cables of suitable size as perHP of all pumps with all structural supports, clamps and cable trays as per approveddesign/specifications, installation will be as per relevant Indian standard and CPWDspecification along with control cable of suitable size).(l lot). Any other electrical andmechanical item required to complete the work.Make - Gloster/ Finolex / RR Kabel |
| 30 | OD10468/2024-2025:Providing and fixing kwhr meter with meter box and complete in all respects.Make - L&T, Schneider, SEIMENS |
| 31 | OD10469/2024-2025:EarthingDesign, supply, installation and commissioning of Overall earthing system for majorelectrical equipment in ETP and MCC Room such as pumps, motors and outdoorlighting.Providing maintenance-free chemical earth pits and connecting them to the panels.copper wire of size 10swg for earthing all the pumps and motors to the nearest earth bar (2 runsfor each motor/pump). Chemical earth pits:- Electrode:anti corrosive copper bonded MS rod,Electrode size: minimum 10 mm dia rod with 1m length, Electrode coating: copper coating ofminimum 250 microns, Make of Electrode and backfillCompound: JK Earthing Electrodes, Bharath Copper or Equivalent, Back fill compound: JKReslow, or Equivalent |
| 32 | OD10465/2024-2025:Electrical works(including supply, installation and termination of cables of suitable size as perHP of all pumps with all structural supports, clamps and cable trays as per approveddesign/specifications, installation will be as per relevant Indian standard and CPWDspecification along with control cable of suitable size).(l lot). Any other electrical andmechanical item required to complete the work.Make - Gloster / Finolex / RR Kabel |
| 33 | General Civil Work |
| 34 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 35 | 50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete |
| 36 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 37 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 38 | Roof Work |
| 39 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 40 | 50.12.2.1:Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required. |
| 41 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 42 | Demolishing the existing top slab of the tank |
| 43 | 2.5.1.C:Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202. (I) By Manual Means (C) Reinforced Cement Concrete |
| 44 | Operation and Maintenance |
| 45 | OD10464/2024-2025:Cost for stabilising ETP, operation and maintenance of the plant 6 months including cost of all materials , labour, electricity charge, water charge, etc. complete |
| 46 | NP2 pipe - treated water collection tank to basin |
| 47 | 19.6.4:Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:300 mm dia R.C.C. pipe Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender