Tender For Beautification To Chattrapati Shivaji Maharaj Chowk At Ramwadi Taluka And District Dharashiv (District Annual Plan, Public Convenience Special Grant Year 2025-2026)
Tender Value
4.16 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
0 days left
EMD
4164
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Osmanabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Beautification To Chattrapati Shivaji Maharaj Chowk At Ramwadi Taluka And District Dharashiv (District Annual Plan, Public Convenience Special Grant Year 2025-2026)
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1:-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Additional Spec. No.Bd.A.1 Page One Number 259 (SSR 22-23 It.No.21.02 ) |
| 2 | Item No.2:-Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.E.4 Page One Number 289 and B- 7, Page One Number38 (SSR 22-23 It.No.24.10 ) |
| 3 | Item No.3:-Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering andcompaction etc. complete. Additional Spec. No.Bd.A.11 Page One Number 263 (SSR 22-23 It.No.21.37 ) |
| 4 | Item No.4:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Additional Spec. No. As directed by Engineer in charge. (SSR 22-23 It.No.21.40) |
| 5 | Item No.5:-Providing & laying in situ cement concrete of M 10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work compacting and curing etc. complete. with reversible Drum Type mixer with SCADA. With crushed sand . (SSR 22-23 It.No.11.03 ) |
| 6 | Item No.6:-Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) Additional Spec. No. BR.47(a) Page Number 140 and B. 7, Page Number38 (SSR 22-23 It.No.14.39 ) |
| 7 | Item No.7:-Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. Additional Spec. No.As directed by Engineer-In- Charge (SSR 22-23 It.No.33.68 ) |
| 8 | Item No.8:-Providing and fixing heavy duty inter locking concrete Coloured paving blocks of60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete Additional Spec. No.A directed by Engineer in charge (SSR 22-23 It.No.33.51) |
| 9 | Item No.9:-Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. Additional Spec. No.As directed by Engineer-in-charge (SSR 22-23 It.No.51.44 ) |
| 10 | Item No.10:-Providing and fixing on walls/ ceiling/ floors, 50 mm dia heavy grade having embossed as ISI Mark galvanised iron pipes weight of 6.33 Kilogram/meter with necessary fittings.and remaking good the demolished portion and primer of anti corrossive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Additional Spec. No. Bd.V.5Page One Number 551 (SSR 22-23 It.No.41.15 ) |
| 11 | Item No.11:-Providing and fixing on walls/ ceiling/ floors, 80 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 10.15 Kilogram/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete Additional Spec.No.Bd.V.5 Page One Number 551 (SSR 22-23 It.No.41.16 ) |
| 12 | Item No.12:-Providing and fixing on walls/ ceiling/ floors, 100 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 14.74 Kilogram/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Additional Spec.No.Bd.V.5 Page One Number 551 (SSR 22-23 It.No.41.17 ) |
| 13 | Item No.13:-Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (SSR 22-23 It.No.6.36) |
| 14 | Item No.14: Charges for testing of material in vigilance and quality control laboratory for concrete compressive strength of C.C. Cube (Set of 3 cubes) Rate as per SSR 22-23 Sr.No.19 P.No.584 |
| 15 | Item No.15: Charges for testing of material in vigilance and quality control laboratory for Paver Blocks Compressive Strength, Water Absorption (Set of 8 Blocks), Flexural Test (Set of 8 Blocks), Resistance to wear ( Set of 8 Blocks) Rate as per SSR 22-23 Sr.No.26 Page No.584 |
| 16 | Item No.16:- Royalty charges b) For all other Minerals= Royalty + surcharge (2%)= 211.95 + 4.23 = 216.18 per cum. As per SSR 22-23 Section V Page No.3 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender