Tender For Proposed Interior Works For Solar Shed At Academic Complex Building, Coeptechnological University, Pune.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2026
7 days left
EMD
49000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Interior Works For Solar Shed At Academic Complex Building, Coeptechnological University, Pune.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 3 | Providing and fixing 100 mm thick factory made reinforced AAC partition wall panels of 600 mm width having tongue and groove joints, fixed in position with approved jointing mortar, GI/steel connectors, anchor fasteners and necessary cutting, chasing, finishing, scaffolding and making good complete as directed by Engineer-in-Charge. |
| 4 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.As directed by engineer-in-charge |
| 5 | Providing & applying Gypsum plaster of average thk up to 10mm on any vertical surface (unplaster masonry surface / concrete surface) including door & window jamb as directed in true line, level and plumb at all levels & places including providing double legged scaffolding, making sharp edge at corner of wall, beam etc. complete as per specification & as directed by Engineer-in-charge. Rate to include manufacturingg & shiftng of gypsum bags ( manually or by other means) for all lead & li s, providing and fixing 150 mm wide Alkali resistant ber glass mesh (145 gsm) on concrete-masonry junctions and grooves chased by di erent services agencies for electrical / plumbing / any allied services etc. complete |
| 6 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Bd.M.3 Page No. 380 |
| 7 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircase of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Spec. No: - Bd. M . 3B Page No. 380 |
| 8 | Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. |
| 9 | Providing and fixing Kota stone skirting of 20–25 mm thickness, machine cut and mirror polished, set in cement mortar 1:4 including backing, jointing with neat cement slurry, finishing joints, curing, and complete as per SSR specifications of Chapter 33, including all materials, labour, and incidental charges. |
| 10 | Providing and applying interior wall finish luster of Asian / Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) - Work is to be done at any floor and at all heights |
| 11 | Providing and fixing factory made double leaf flush door shutter of 35 mm thickness, solid core type, decorative type, exterior grade (BWP) conforming to IS 2202, finished with commercial face veneers on both faces, having hardwood internal lipping/battening all around, including approved quality stainless steel/brass fixtures and fastenings such as hinges, tower bolts, handles, stoppers, lock arrangement etc., hung on existing frame complete, including all labour, materials, carriage, cutting, making good and finishing complete. |
| 12 | Providing and fixing of 32 mm thick Single Leaf Door Shutter BWP solid core type Flush doors including 1mm thick laminate/ selection on both sides covered in 75mm x 27 mm teakwood lipping around hinged to T.W. frame,6 no. of SS hinges 5\\" length,,all of approved makes & selected by Architect/Client , One coat of primer and two coats of Polishing to frame and shutter edges etc. complete all as per the design, drawing of doors and windows and as per direction of Architect/Client.(Materials to be used as per approved make list)(excluding fixtures) and Frame paid Sepratly |
| 13 | Removing existing terrace waterproofing treatment including dismantling/ scraping of existing membrane/ coating/ brick bat coba as directed, cleaning surface, stacking debris and disposing off the same complete |
| 14 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 15 | Removing cement or lime plaster including disposing of the spoils as directed with all leads, lifts etc, complete. |
| 16 | Removing iron pipe raling having wooden R.C.C. or C.C. or iron post and stacking the materials as directed etc. complete. |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately). - Second class teak wood |
| 18 | Demolished Material Shifting by truck Spec. No: - As directed by Engineer in charge |
| 19 | Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. Please Enable Macros to View BoQ information Compatibility Report for BOQENTC.xls Run on 7/21/2026 17:05 If the workbook is saved in an earlier file format or opened in an earlier version of Microsoft Excel, the listed features will not be available. Significant loss of functionality # of occurrences Version Any effects on this object will be removed. Any text that overflows the boundaries of this graphic will appear truncated. 3.0 Excel 97-2003 Some cells in this workbook contain data validation rules, which refer to values on other worksheets. These rules won't be saved. 6.0 Excel 97-2003 Minor loss of fidelity Some cells or styles in this workbook contain formatting that is not supported by the selected file format. These formats will be converted to the closest format available. 12.0 Excel 97-2003 |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender