Tender For Construction Of Shed And Concrete Footpath Between Fencing At Magazine Building, Provn Of Concrete Approach Path For Both New Aws Sites And Provn Of Parking Shed Near Sas&O Office At Afs Yelahanka.
Tender Value
29.06 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
16 days left
EMD
58120
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Shed And Concrete Footpath Between Fencing At Magazine Building, Provn Of Concrete Approach Path For Both New Aws Sites And Provn Of Parking Shed Near Sas&O Office At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation over area n.exc 1.5m deep and getting out in Hard/dense soil complete all as specified and directed. |
| 2 | Excavating in post holes (or similar holes) each not exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50 m and making good surface as in soft/loose soil complete all as specified and directed. |
| 3 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in hard/dense soil complete all as specified and as directed. |
| 4 | Returning filling in excavated soil upto a depth of 30 cm after riddling of excavated soil (in lieu of sand) for cushioning of cable and refilling of trenches with left over normal excavated soil including spreading, levelling, watering and well ramming in layers complete all as specified and as directed. |
| 5 | Removing excavated material to a distance exc.1.50 Km but n exc 5 Km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed |
| 6 | Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 7 | M&L for Plain Cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) cement concrete in foundations, filling and mass concrete as in post complete all as specified and directed. |
| 8 | M&L for Hard core of gauge n exc 63mm in broken stone or boulders, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface etc all as specified and as directed |
| 9 | M&L for 100mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) as in sub-floors, sub bases, floors and paving’s etc complete all as specified and directed |
| 10 | M&L for 100 mm thick Plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in flooring, finishing cement concrete surface even a smooth without using extra cement, complete all as specified and directed. |
| 11 | M&L for Forming contraction joint (Dummy) 100mm deep x 10mm wide and sealed with sealing compound Grade 'A’. complete all as specified and directed. |
| 12 | M&L for Finishing surface of concrete roads, pavements, by brooming complete all as specified and directed. |
| 13 | M&L for Forming 12mm thick expansion joints in the thickness of concrete slab 100mm joint filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade 'A' complete all as specified and as directed. |
| 14 | M&L for Forming contraction joint(Dummy) 65mm deep x 10mm wide and sealed with sealing compound Grade 'A'.complete all as specified and as directed. |
| 15 | S&F Steel work in tubular trusses including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 and the structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface at contractor's workshop before fabrication complete all as specified and as directed. |
| 16 | S&F mild steel plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. |
| 17 | S&F mild steel screw bolts (machine made) of dia 11 to 15mm with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and as directed. |
| 18 | M&L for preparation of steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 19 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self-tapping screws complete all as specified and directed. |
| 20 | M&L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories for wiring and provn of 1.5 Sqmm PVC insulated copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch complete all as specified and as directed.Note (1). The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. |
| 21 | S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed. |
| 22 | S&F LED batten light fitting 24 Watts 4 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 23 | S&F LED security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant, efficacy complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 42 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete suitable for pop/grid false ceiling in all respect as complete all as specified and as directed. |
| 24 | S & F MCB SP 6 to 32 Amps 240 volts C type with rupturing capacity 10 KA complete all as specified and as directed. |
| 25 | S & F sheet metal enclosure MCB DB SPN 2 way single door with 100 amps rated aluminium bus bar 240 volts double door with locking system complete all as specified and as directed. |
| 26 | Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1 flat, size 250 mm x 150mm x 40mm complete all as specified and as directed. |
| 27 | Cutting the existing road of suitable size for passing of UG Cable in crossing and making good the disturbed surface of road to its original specification complete all as specified and as directed. |
| 28 | S&F GI pipe light grade of dia 40 mm dia with all fittings laid in trenches complete all as specified and as directed. |
| 29 | Supply and laying in trenches, LT underground cable, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross sectional area 6 Sqmm, 2 core multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender