Tender For Comprehensive Repair And Maintenance To Scc, Pmp Sub Area, Mi Room And Other Stn Hq At Si Lines Under Ge Bhopal
Tender Value
45 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair And Maintenance To Scc, Pmp Sub Area, Mi Room And Other Stn Hq At Si Lines Under Ge Bhopal
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
| 2 | 11-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Taking down carefully existing aluminum/ glass doors of any size for necessary repairs and replacement of minor items like, screws, hinges, cleaning, servicing of floor spring and adjusting of level of doors and to make in working condition all as specified and directed |
| 3 | S&F anodised aluminium snap grid of size 600x600 mm frame work for false ceiling and exposed metal frame PVC coated ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid including 2-3mm GI haging wire (upto 1200mm length) fixed to ceiling by drilling and fixing with hold fasteners of suitable size and dismantling of exiting false ceiling complete all as specified and directed by Engr in Charge. |
| 4 | S&F anodised aluminium Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.36 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.6 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.36 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and fixing of seamless calcium silicate ceiling made out of 1800 x 1200 x 12 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including two coat oil bound distemper over prepared ceiling surface and dismantling of exiting false ceiling complete all as specified and directed |
| 5 | M&L for solid PVC wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing and fixing at site, all as specified and directed |
| 6 | S&F in repairs PVC pin hole sandwich wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and matching L-shape beading at end and corners and fixing at site on PVC frame as per specification complete all as specified and directed. |
| 7 | M&L 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. all as specified and directed |
| 8 | M&L for granite 18-20 mm thick (of approved colour and texture) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade or granite, rounding of edges incl dismantling of old stone slab complete all as specified and directed. |
| 9 | M&L for light shade vitrified ceramic tiles (of approved shade and design) area of each tiles not exc 0.38 sqm, as in floors and skirtng, etc. set and jointed in neat cement slurry and pointed with white cement over and including 15mm thick screed bed in CM (1:6) including dismantling of old tiling fixed in any mortar complete all as specified and as directed. |
| 10 | M&L for premium double charge glossy finish vitrified tiles 9-10mm thick (area of each tiles n exc 1.00 sqm each) in floors and skirting fixed with 5mm spacers set and jointed in neat cement slurry over and including screed bed 15mm in CM (1:6) and pointed with epoxy tile grout filling of approved make and color including dismantling of old tiling fixed in any mortar and position all as specified and directed. |
| 11 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (area of each tiles exc 0.11sqm but not exc 0.18 sqm) in floors and skirting set and jointed in neat cement slurry over screed bed 15cm in CM (1:6) and pointed in white or coloured cement to match with shade of tiles including dismantling of old tiling fixed in any mortar complete all as specified and directed. |
| 12 | M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, including finishing of concrete topping even and rough complete all as specified and directed |
| 13 | M&L glazed ceramic colour tiles with matching highlighter in vertical surfaces ( design and pattern as approved by EIC) of size not less than 600x300 x 7-8mm thick set and jointed in neat cement slurry fixed over and including 10mm thick rendering in CM (1:4) as in backing coat and pointed in white tiles including dismantling of old tiling fixed in any mortar complete all as specified and directed. |
| 14 | M&L for heavy duty parking /outdoor tiles minimum 10mm thick (square/rectangular) area of each tiles not exc 0.18 sqm, in floors set and jointed in neat cement slurry and fixed over 15mm thick screed bed in CM 1:4 incl demolition of old tiles all as specified and directed. |
| 15 | M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, sub base etc incl demolition of old concrete any type complete all as specified and directed |
| 16 | S&F of GI tubing Dia 15 mm dia 'medium grade' and all fittings on walls / ceilings or Laying in floors incl groove cutting and plaster finish and taking down old water tubing fixed in any positions complete all as specified and directed |
| 17 | S&F of GI tubing Dia 20 mm dia 'medium grade' and all fittings on walls / ceilings or Laying in floors incl taking down old water tubing fixed in any positions complete all as specified. |
| 18 | S&F rotational moulded polyethylene water storage tank color white 500 ltrs cap cylindrical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I incl dismantling of old broken water storage tank complete all as specified and directed |
| 19 | S&F rotational moulded polyethylene water storage tank color white 1000 ltrs cap cylindrical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I incl dismantling of old broken water storage tank complete all as specified and directed |
| 20 | S&F in repair for vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including 32mm PTMT waste coupling and 32mm corrugated waste pipe complete all as specified and as directed by the Engineer-in-Charge. |
| 21 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified & as directed. |
| 22 | S & F in repairs vitreous china squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed |
| 23 | S&F in repair wash hand basin counter top having size 440 x 440 x 135 or 420 x 345 x 170 mm rectangular/ oval shape complete all as specified and directed. |
| 24 | S&F in repairs vitreous china urinal half stall type with fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in white cement, with brackets, flush pipe, and union for discharge pipe, PTMT spreader and PTMT waste coupling 32mm & waste pipe, PVC Connection pipe 450mm for flushing (excluding flushing cistern) complete all as specified and directed. |
| 25 | Petty reapirs to half stall vitreous china urinal/ sensor type urinal , including changing of sensor of flushing valve with complete kit, complete all as specified and directed. |
| 26 | S&F in repairs 32mm bore LDPE waste pipe for WHB/ sink length not less than 80cm upto floor trap complete all as specified and directed. |
| 27 | S & F in repair 10 ltrs capacity PVC low level, flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed. |
| 28 | S&F in repairs 15 mm bore fancy type CP tall pillar taps (having weight not less than 0.665 kg as per SSR Part-I clause 18.16.2 ) cast copper alloy with capstan heads, screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 29 | S&F in repairs fancy type long body CP bib taps 15 mm dia (having weight not less than 0.575 kg as per SSR Part-I clause 18.15.1 ) cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule , complete all as specified. |
| 30 | S&F in repair CP two way, bib tap 15mm dia complete all as specified and directed. |
| 31 | S&F in repair 15mm dia CP stop valve/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed |
| 32 | S&F in repairs CP shower rose with swivel joint of 125mm size all as specified and directed. |
| 33 | S&F in repairs PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nut for water supply complete all as specified & as directed. |
| 34 | S&F in repair CP Health faucet( ABS Body) suitable for 15mm dia pipe with 1.25m long flexible steel tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 35 | S&F in repair glass shelf with CP bracket 55cm (min) long incl necessary fixing screws and PVC rawl plugs complete all as specified and directed. |
| 36 | S&F in repair 5mm thick corner glass shelf (CP bracket) of size not less than 225x 225mm with SS railing fixed with SS screws and PVC rawl plug all as specified and directed |
| 37 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4.0 sqm each complete all as specified and directed. |
| 38 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed. |
| 39 | Taking down Shutters of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed |
| 40 | S&F pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and filling of PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) in frame complete all as specified and directed. |
| 41 | S&F pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and filling of PCC 1:3:6 (20mm graded stone aggregate) type C1 in frame complete all as specified and directed. |
| 42 | S & F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 75x45 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with fullbody threaded star headed SS screwshavingminimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 modules ofelasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. |
| 43 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 modules ofelasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction ofEngineer-in-Charge. |
| 44 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. and including supply and fixing following items As approved by Engr-In-Charge : (a) SS chrome finish Butt Hinges 125mm medium weight - 3 Nos per leaf(b) SS chrome finish Tower Bolt 200mm long - 2 Nos per leaf(c) SS chrome finish Handles 150 mm - 2 Nos per leaf (d) SS chrome finish Sliding door bolt 300mm long - 1 No per leaf (e) SS chrome finish Floor Door Stooper with rubber shoe - 1 No per leaf |
| 45 | S&F factory made 30mm thick WPC ( Wood polymer Composite ) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cum, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter. XTN aluminum mosquito mesh is inclusive and combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, scres and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, and including supply and fixing following items As approved by Engr-In-Charge : (a) SS chrome finish Butt Hinges 125mm medium weight - 3 Nos per leaf(b) SS chrome finish Tower Bolt 200mm long - 2 Nos per leaf(c) SS chrome finish Handles 150 mm - 2 Nos per leaf (d) SS chrome finish Sliding door bolt 300mm long - 1 No per leaf (e) SS chrome finish Floor Door Stooper with rubber shoe - 1 No per leaf |
| 46 | S&F 35mm thick second class hard wood factory made, plain framed panelled door shutter (any number of panels) with panel of 9mm thick BWP commercial plywood or 12mm thick veneered particle board medium dencity, wood partical board with commercial face veneers. The size of members of shutters shall be as specified in section 8 clause 8.20 (a) of SSR Part-I 1991 complete all as specified and directed (a) SS chrome finish Butt Hinges 125mm medium weight - 3 Nos per leaf(b) SS chrome finish Tower Bolt 200mm long - 2 Nos per leaf (c) SS chrome finish Handles 150 mm - 2 Nos per leaf (d) SS chrome finish Sliding door bolt 300mm long - 1 No per leaf (e) SS chrome finish Floor Door Stooper with rubber shoe - 1 No per leaf |
| 47 | S&F solid PVC door frame(approved color) of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directed. |
| 48 | S&F Factory made solid panel PVC door shutter(approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed. (a) SS chrome finish Butt Hinges 125mm medium weight - 3 Nos per leaf(b) SS chrome finish Tower Bolt 200mm long - 2 Nos per leaf (c) SS chrome finish Handles 150 mm - 2 Nos per leaf |
| 49 | S&F of 10mm thick frosted toughened glass as in hinged doors including cutting to shape, drilling holes and necessary door hinges required complete all as specified and directed. |
| 50 | S&F of fancy type stainless steel body lock of premium quality/ approved brand for glass door with two/three set of keys complete all as specified and directed. Make : Godrej |
| 51 | S&F of SS 300mm long fancy H-type curve/ straight as required handle set made out of 25mm dia stainless steel pipe fixed to toughned glass doors complete all as specified and directed. |
| 52 | S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 53 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) frame shutters for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 including necessary locks handle, rubber gasket for glass/ wire mesh fixing complete all as specified and directed. |
| 54 | Supply and fix 4.0mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 55 | S&F 3mm thick plain sheet glass fixed with oil putty, ordinary quality n exc. 0.5sqm in each pane including hacking out old broken glass complete all as specified and directed. |
| 56 | S&F stainless steel wire cloth, 0.63mm nominal dia of wire and average width of tinned tacks, or galvanised wire staples complete all as specified and as directed . |
| 57 | S&F in repair door closer aluminium (extruded section body) hydraulically regulated, designation No. 2 universal type, suitable for door shutters up to 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 58 | S&F in repair mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel frame by welding complete complete all as specified and directed. |
| 59 | S&F 25mm stainless steel curtain rod premium quality incl taking down old rod with fittings complete all as specified and directed. |
| 60 | S&F decorative type SS curtain rod bracket with designer end cap of suitable for 25mm dia rod complete all as specified and directed. |
| 61 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 62 | S&F in repair 18mm plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge |
| 63 | S&F in reapir 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed by Engr-in-charge |
| 64 | S&F 350mm long SS telescopic channel fixed in sliding drawer with necessary screws complete all as specified and directed. |
| 65 | S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed |
| 66 | S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chromium plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 100mm complete all as specified & directed by Engineer -in -Charge. |
| 67 | S & F kitchen baskets with 100 % stainless steel, non - magnatic, multilayer chrome plated , argon welded, double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 150mm complete all as specified & directed by Engineer -in -Charge. |
| 68 | S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 200mm complete all as specified & directed by Engineer -in -Charge. |
| 69 | S&F 100 mm Stainless steel handle, cast type, polished bright complete all as specified and directed by Engr-in-Charge |
| 70 | S&F in repair to cabinet hinges Soft Close SS 8 Crank complete all as specified and directed |
| 71 | S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor or fixed to walls including taking down old pipes complete. |
| 72 | S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or floors or fixed to walls including taking down old pipes complete. |
| 73 | S&F 75 mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door, jointed with solvent cement complete all as specified and directed. |
| 74 | S&F 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door, jointed with solvent cement complete all as specified and directed.. |
| 75 | S&F 75 mm bore PVC (SWR) bend in any radius, jointed with solvent cement complete all as specified and directed. |
| 76 | S&F 110mm bore PVC (SWR) bend in any radius, jointed with solvent cement complete all as specified and directed. |
| 77 | S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement complete all as specified & as directed. |
| 78 | M&L brick work with sub class ‘B’ modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 including demolition of old brick masonary all as specified and directed. |
| 79 | M&L for rendering 15 mm thick on other than fair face of brick work or concrete surfaces or stone masonry surfaces in CM 1:4 using WPC finished even and smooth without using extra cement complete all as specified. Note: WPC shall be measured and paid separately under relevant item. |
| 80 | M&L for rendering 10 mm thick on brick or concrete surfaces or surface of fair faces of brick work in cement plaster 1:6, finished even and smooth w/o using extra cement all as specified and directed |
| 81 | M&L for 10 mm thick rendering in cement plaster 1:6 on other than fair face of brick/ concrete surfaces finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed. |
| 82 | M&L for rendering 15 mm thick on fair faces of brick/concrete surfaces cement plaster in CM (1:4) , finished even and smooth without using extra cement and with WPC as per manufacturer's instruction, including taking down of of existing old plaster complete all as specfified and directed. Note:- WPC shall be measured and paid seperately. |
| 83 | M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed. |
| 84 | M & L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of white cement based putty of 1-2 mm thick complete all as specified and directed by the Engr-in Charge. |
| 85 | Supply only integral water proofing compound complete all as specified and directed. |
| 86 | M&L for 10mm thick cement plaster over PCC in CM 1:3 finished even and smooth (without using extra cement) using WPC of approved make per manufacturers instruction and priming surfaces with applying evenly a tack coat of industrial hot bitumen 85/25 grade VG-10 at the rate of 1.2 kg per sq.m and applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) on primed surface by forced application and applying two coat of alumnum paint over APP surfaces including taking down old plaster from roof (G+2) and existing APP sheet complete as specified and directed Note:- WPC shall be measured and paid separately. |
| 87 | M&L providing, cement concrete 1:2:4 type B1 using 20 mm gradded stone aggregate in lintels upto 1.5m clear span, cills, steps; copings, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including neccessary formwork complete as specified and directed. |
| 88 | M&L for preparing and applying Dr. Fixit rain coat on walls in following steps as appended below:-(1) Existing substrates cleaned and removed all scale dirt, algea moss, fungal growth with using mechanical wall sander ( having mechanical vaccum mechanism) with RPM not less than 1500, sanding pad of 80 grit of dia 7\\"/ 9\\"on walls (external surface) . All loose plaster will be repaired with polymer modified mortar using Dr. Fixit pidicrete URP and norrow cracks upto 5mm shall be repaired with crack X-paste and the larger cracks upto 10mm with Dr fixit crack-X shrink free. The surface shall be made dry completely for upto 4-6 days for application of primer.(2) Applying one coat primer Dr. Fixit rain coat diluted with 2:1 with water (prime seal:water) maintaining spreading rate @ 8 to 10 sqm / ltr complete all as specified and directed. (3) Applying two coats of Dr Fixit raincoat without any dilution for coverage 3.5 sqm/ltr and second coat of Dr. fixit rain coat without any dilution for coverage 7 sqm/ltr complete all as specified and directed.Note :- (i) Second coat must be applied after lapse of 6 to 8 hours application of first coat.(ii) The application of Dr Fixit raincoat must be avoided at temperature below 10˚C more than 35˚C and in direct sunlight. |
| 89 | M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a cot of red oxide, zinc chrome primer complete as specified and directed |
| 90 | M&L for PCC (1:3:6) type C-2 using 40 mm graded aggregate as in post hole complete all as specified and directed complete as specified and directed |
| 91 | S&F for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A incl dismantling of old structural steel all as specified and directed. |
| 92 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (precoated AZ 150 micron) of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer including dismantling of old sheets fixed at any location complete all as specified and directed |
| 93 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick (precoated AZ 150 micron) of approved colour having tensile strength of 550 Mpa in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) including dismantling of old sheets fixed at any location complete all as specified and directed |
| 94 | Deduct Schedule of credit (calculation will be done off line) Rs. 42595.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Today
Aug 18, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender