Tender For Repair And Replacement To Sub Floor, Floor Coverings, Pvc Flooring, Anti Static Flooring And Other B/R Misc Works At Dbm, Agm, Sbm, Htl, Ltl, Utl Etc In Nad Explosive Area And Other Various Otm Accn At Non- Explosive Area Under Age B/R-Ii
Tender Value
42 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
17 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Replacement To Sub Floor, Floor Coverings, Pvc Flooring, Anti Static Flooring And Other B/R Misc Works At Dbm, Agm, Sbm, Htl, Ltl, Utl Etc In Nad Explosive Area And Other Various Otm Accn At Non- Explosive Area Under Age B/R-Ii At Naval Station Karanja
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Material and labour for cement concrete type D-2, 1:4:8 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete etc complete all as specified and directed |
| 3 | Material and labour for 100mm thick cement concrete type B-2 1:2:4 using 20mm graded crushed stone aggregate as in path/floor finished fair even and smooth without using extra cement, laid in alternate panels of size not exc 4 sqm each including bitumen filling in joints complete all as specified and as directed by Engr-in-Charge. |
| 4 | M & L PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection without using extra cement complete all as specified and directed. |
| 5 | M&L Chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with gray cement and pigments in any colour machine preassed glazed, laid over and including screed bed, 15mm thick in cement motor 1:6 complete all as specified and as directed by Engr-in-charge. |
| 6 | M&L for sand filling under paver blocks including spreading levelled watering and well ramming in layer not exc 25 cm complete all as specified and directed. |
| 7 | M&L for machine pressed precast concrete interlocking paver block (Reflective type) in any shape and size comfirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement & pigment including taking down old Interlocking tile/slab complete all as specified and directed. |
| 8 | M&L for machine pressed precast concrete interlocking paver block (Reflective type) in any shape and size comfirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement with pigment including taking down old Interlocking tile/slab complete all as specified and directed. |
| 9 | M&L for taking out old existing interlocking paver blocks any thickness, size & type from the existing location including snad dust, stacking properly the serviceable tiles for reuse; removal of the unserviceable materials & disposal to low lying areas at a distance not exceeding 250m and relaying the paver blocks, with an dincluding by providing 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. |
| 10 | M&L for PCC (1:2:4) type B0 (using 12.5mm graded aggregate) in coping bed black etc including nessesary form work complete all as specified and directed. |
| 11 | M&L for 25 mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed. |
| 12 | S&F for PVC tiles /sheets, of 2mm thick laminated plain coloured homogenous, laid with approved rubber based adhesive in floors including taking down of Old PVC tiles complete all as specified and directed. |
| 13 | M & L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm (1:4) for laying floor fineshes including dismentling of old tiles & screed bed etc. complete all as specified and directed. |
| 14 | M & L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm (1:4) for laying floor fineshes including dismentling of old tiles & screed bed etc complete all as specified and directed. |
| 15 | M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors including screed bed or bedding layer of morar 15 mm in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including dismentling of old tiles & screed bed complete all as specified and as directed. |
| 16 | M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in skirting/dado including 10 mm thick cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including dismentling of old tiles & backing coat complete all as specified and as directed. |
| 17 | M & L for Glazed ceramic coloured tiles in vertical surface 300x450x7mm mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including over and including 10 mm thick rendering or bedding layer in cement mortar 1:3 including dismentling of old tiles & backing coat etc. complete all as specified and directed |
| 18 | M&L for glazed ceramic coloured digital tiles of size 300x600x7mm Size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface etc including dismentlling of old tile all as specified and as directed by Engr-in-Charge. Note:- Desinger concept tiles matching with exisitng tiles. |
| 19 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing including 20mm thick screed bed in Cement Mortar 1:6 including dismentling of old tiles & screed bed complete all as specifed and directed by Engr-in-charge. |
| 20 | M&L for 2mm thick polymer natural / synthetic anti static flooring fire retardant compression moulding conductive flooring having electrical residence floor surface to earth between 50 kilo Ohms to 2.5 mega Ohms measured with wet electrode in accordance with details contained in STEC pamphlet No 7 all as specified, fixed over and including copper strips grid work using 50mm x 0.5mm thick forming 0.9sqm grid, joints of copper strips, brazed on the existing surface including cleaning & preparation of surface by passing with the suitable adhesive. The copper grid provided with diagonal earthing. The earthing resistance shall not exceed one ohm. The copper strip work shall be fixed to the existing floor at the 0.6m to 0.9m, including removing existing PVC flooring, complete as per manufacturer instructions and as directed by Engr-in-Charge. |
| 21 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 22 | M&L brickwork with sub class 'B' bricks , straight or curved on plan exc. 6m mean raidus built in cement mortar 1:6 including complete all as specified and directed |
| 23 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick/concrete surfaces with two coats i.e (10 mm thick backing coat and 5mm thick finishing coat) , finished even and smooth complete all as specified and directed. Note for item nos.23 & 24:- The quoted unit rate shall be deemed to include the cost of scaffolding, all necessary arrangements, and safety measures for work at any building height. No additional payment shall be admissible on this account. |
| 24 | M & L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified & directed. |
| 25 | Material and labour for preparation of new plastered surfaces of walls and appplying two coats of oil bound distemper over 1mm thick wall care putty on plastered surfaces complete all as specified and directed. |
| 26 | M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint on one coat of primer complete all as specified and as directed. |
| 27 | Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed. Note for item nos.27 to 29:- The quoted unit rate shall be deemed to include the cost of scaffolding, all necessary arrangements, and safety measures for work at any building height. No additional payment shall be admissible on this account. |
| 28 | S&F Anodised aluminium snap grid of size 600x600 mm frame work for false ceiling complete all as specified and directed by Engr in Charge. |
| 29 | S&F Hangers 6 mm dia GI ( upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 30 | S&F 4 mm thick Non asbestos cement plain building board fixed to aluminium grid frame work in ceiling all as specified and directed. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.) |
| 31 | M & L for preparing asbestos & ceiling board surfaces and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed. Note:- The quoted unit rate shall be deemed to include the cost of scaffolding, all necessary arrangements, and safety measures for work at any building height. No additional payment shall be admissible on this account. |
| 32 | S&F in repair for PVC False ceiling consisting of 600 mm x 600 mm, 8-10mm thick prelaminated self design including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof salbs by means of ceiling cleats made out of GI flat 40x3 mm sie 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm x 25 mm angles complete all as directed by Engr-in-charge and as per Manufacturer's specification & drawing. |
| 33 | M&L for providing and fixing Decorative Hollow PVC sheet 10-12 mm thick (fluted panel) having density not less than 4 Kg/Sqm fixed to wall / ceiling panelling with self drilling screws including necessary frame of aluminium section 51x25x.55mm and 600 mm c/c grid work and corner mouldings as required as per manufacturing instruction complete including dismantling of existing one complete all as specified & direced. |
| 34 | Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed |
| 35 | Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. |
| 36 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as directed by Engineer-in-Charge. Note: (i). For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii). M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 37 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as directed by Engineer-In-Charge.(Note: stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 38 | S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and directed |
| 39 | S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C\\" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed |
| 40 | S&F aluminium door / window / ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items, with and including rubber beading for 4 or 5mm thick glass, making good to the disturbed portion with its original specifications, complete all as specified and directed. |
| 41 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as per site requirement and as directed by Engr-in-Charge. |
| 42 | S & F extruded aluminium alloy handles fabricated type anodized 150 mm size, complete all as specified and directed |
| 43 | S&F mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed. |
| 44 | M&L for Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100 x 58 x 1.90mm with stainless steel screws etc. complete all as specified and directed |
| 45 | S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed. |
| 46 | S&F 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 47 | M & L for PCC 1:3:6, type C1 (using 20 mm graded agg) coping or filling for hold fast without using extra cement complete all as specified and directed. |
| 48 | M & L for preparation of new or untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 49 | M & L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 50 | Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed. |
| 51 | M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like, laid over & including cement mortar 10 mm thick 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 52 | S&F concealed star lock powder coated for aluminium window fixed as per manufacturers instructions complete all as specified and directed. |
| 53 | S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and as directed |
| 54 | Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 55 | S&F 4 mm thick Sheet glass, ordinary quality, ground or obscured or frosted, on one side and glazing in wooden, Aluminium, steel frame in square of any size complete all as specified and directed. |
| 56 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 57 | S&F of steel work in tubular trusses, pillars and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including 32mm dia PVC waste pipe complete all as specified and directed. |
| 59 | S&F in repairs 15 mm bore fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 60 | S&F in repair to Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed by Engr in Charge |
| 61 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe, CI trap 100 mm Bore of pipe etc complete all as specified and directed |
| 62 | Supply and fixing in repair white vitreous china wash down water closet pan (Pedestal pattern) with and including P or S trap, including plastic seat cover closed pattern, fixing bolt etc complete all as specified and directed. |
| 63 | S&F in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 64 | S&F in repair for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed. |
| 65 | S&F in repairs fancy type bib taps chromium plated 15 mm dia cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule, complete all as specified and directed |
| 66 | S&F in repairs fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 67 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D; type, 60 cm long between flanges complete all as specified and directed. |
| 68 | S&F in repairs 600x450 mm beveled edge looking mirror 5 mm thick selected quality glass mounted on 6 mm thick AC building board fixed to wall by wooden plug with chromium plated brass screw and cup washer fixed complete all as specified and directed |
| 69 | S&F in repair 15 mm dia PVC connection of length 450mm long complete all as specified and directed. |
| 70 | S&F 15 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down of old Pipe line complete all as specified and directed |
| 71 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches, wall and ceilings or laid in floors including taking down of old Pipe line complete all as specified and directed |
| 72 | Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches, wall and ceilings or laid in floors including taking down of old Pipe line complete all as specified and directed |
| 73 | Supplying and fixing in repair CPVC Brass Elbow (3/4 X ½) SDR 11 & Plain CPVC SDR 11 fittings complete all as specified and directed |
| 74 | Supplying and fixing in repair provision of special fittings 20 mm, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc, fittings complete all as specified and directed |
| 75 | Supplying and fixing in repair provision of special fittings 25 mm, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc, fittings complete all as specified and directed |
| 76 | Supplying and laying of 20 mm outer dia CPVC gate valve SDR 11 & Plain CPVC SDR 11 fittings in trenches, wall and ceilings or laid in floors including taking down of old Pipe line complete all as specified and directed |
| 77 | Supplying and laying of 25 mm outer dia CPVC gate valve SDR 11 & Plain CPVC SDR 11 fittings in trenches, wall and ceilings or laid in floors including taking down of old Pipe line complete all as specified and directed |
| 78 | M&L for 20 mm dia steel tube medium grade, galvanised with all fitting and fixed complete to wall and ceiling or laid in floors including taking down of old Pipe line complete all as specified and as directed |
| 79 | Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed |
| 80 | S &F 150 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including bends complete all as specified and directed. |
| 81 | S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed. |
| 82 | S &F of 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed. |
| 83 | S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed |
| 84 | S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender