Tender For Repair / Maintenance Of Street Light, Security Lights, Perimeter Security Lights And Connected Works In C Area And 1 Afsr Area Under Ge (Af) Palam, Delhi Cantt - 10
Tender Value
20 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
3 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Street Light, Security Lights, Perimeter Security Lights And Connected Works In C Area And 1 Afsr Area Under Ge (Af) Palam, Delhi Cantt - 10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting and taking down existing security light/flood light fittings from 9/11 Mtr & high mast upto 22 Mtrs of any make or any capacity for repairs or replacement of burnt/worn out accessories (surge protector, driver, cable etc) through ladder/motorised/amnual system from GI bracket on pole of any size and refixing the same after cleaning, general overhauling, repairing and making serviceable and refixed the same after making serviceable and testing complete all as specified and as directed. Note:- The new consumable item shall be measured and paid seperately under respective items. |
| 2 | Supply only driver of any make or any model on existing LED street light luminaires of wattage 45 to 120 watt for LED street light fitting to match with the existing make and model complete all as specified and as directed, |
| 3 | Supply only driver of any make or any model on existing LED flood light luminaire of wattage 60 to 120 watt for LED street light fitting to match with the existing make and model complete all as specified and directed. |
| 4 | Supply only surge protector of any make or any model on existing LED street light luminairies of wattage 45 to 120 watt for LED street light fitting to match with existing make and model complete all as specified and as directed. |
| 5 | S&F in replacement new generation energy saving and environment friendly high efficient high power 70 Watt LED street light made up of pressure die cast aluminium housing and enclosed with toughened glass with IP66 protecton and impact resistance of IK07 and with 10KV Built-in surge protection Device complete all as specified and directed. MAKE- Bajaj/CG/Halonix |
| 6 | S&F in replacement new generation energy saving and environment friendly high efficient high power 90 Watt LED street light made up of pressure die cast aluminium housing and enclosed with toughened glass with IP66 protecton and impact resistance of IK07 and with 10KV built-in surge protection device complete all as specified and as directed. MAKE:- Bajaj/CG/Halonix |
| 7 | S&F in replacement new generation post-top 35 watt energy saving environmental friendly, long life asthetically designed with symmetrical light distribution, spun aluminiun landscape luminaire with high power LEDs as light source with IP65 protecton complete all as specified and as directed. MAKE:- Bajaj/CG/Halonix |
| 8 | S&F LED Luna bollard light fitting 10W with opal diffuser and aluminium reflector, with all accessories internally prewired and including base & PCC work connecting up with twin core copper conductor cable complete all as specified and as directed. |
| 9 | S&F in replacement PVC SMC boxes with hinged door fixing of size (333mm x 233mm x 120mm) with MS clamp made to shape with necessery nut, bolts and washers complete comprising of aluminium busbar 200 Amps capacity of suitable size mounted over porcelain insulator with nut, bolts & washers including MCB 6 Amps and making incoming and outgoing connections by taking out loops of cable of any size including necessary excavations and other civil works complete all as specified and as directed. |
| 10 | S&F in replacement of cable PVC insulated unarmoured for connection 1.5 sqmm 3 core copper conductor duly drawn from junction box to street light fitting on poles in PVC flexible pipes complete all as specified and as directed. |
| 11 | S&F in replacement new generation energy saving and environment friendly high efficient high power 70 Watt LED flood light made up of pressure die cast aluminium housing and enclosed with toughened glass with IP66 protecton complete all as specified and as directed. MAKE:- Havells Cat No JETAFLAREFL70WLED757LTG or equivalent in Philips or Bajaj. |
| 12 | S&F in replacement new generation energy saving and environment friendly high efficient high power 100 Watt LED flood light made up of pressure die cast aluminium housing and enclosed with toughened glass with IP66 protecton complete all as specified and as directed. MAKE:- Havells Cat No JETAIRISFLS100WLED757ASYMLTG or equivalent in Philips or Bajaj. |
| 13 | S&F in replacement new generation energy saving and environment friendly high efficient high power 120 Watt LED flood light made up of pressure die cast aluminium housing and enclosed with toughened glass with IP66 protecton complete all as specified and directed. MAKE- 1. Havells Cat No JETAIRISFLS120WLED757ASYMLTG or equivalent in 2.Philips 3.Bajaj |
| 14 | M&L for replacement street light bracket made out of 40/32 mm dia light grade GI pipe bend to shape not less than 1.8 mtr length along with 02 Nos fixing clamps properly shaped and fabricated out of 50mm x 5mm thick MS flat nut & bolts duly painted with two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed. |
| 15 | M&L for scrapping of surface of steel tubular poles of any size 9/11 mtr with emery paper and painting of poles with two coats of aluminium paint over a coat of primer including writing pole nos with radium stickers of 55mmx55 mm and sky blue and white fluorescent strip 30cm strip upto 1.5 Mtrs height from ground level complete all as specified and as directed. |
| 16 | M&L for applying two coats of weather coat exterior emulsion paint of approved quality over a coat of primer after scraping the surface of PCC poles 9/11 Mtrs height with wire brush including writing pole nos with radium stickers of 55mmx55 mm size and sky blue and white fluorescent strip 30 cm strip upto 1.5 Mtrs height from ground level complete all as specified and as directed. |
| 17 | Dismantling concrete poles/steel tubular poles, struts of any size complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Supply and fixing steel tubular swaged poles with cast iron base plate, final taper plug bolts, nuts, screws as specified type 410 SP-31 (9.0 Mtr long) including embossing the manufacturer's name and IS No of pole and erecting in position all as specified and directed including painting the exposed portion with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat red oxide primer and painting of 30 cm wide blue and white strips upto 1.5 mtr from bottom of the errected pole including marking of pole number complete with all accessories complete all as specified and as directed. Note:- Necessary excavation, earth work and PCC shall be measured and paid for separately. |
| 19 | Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles & stay etc complete all as specified and as directed by Engr-in-Charge. |
| 20 | All as per item No 19 here-in-before but exceeding 1.5 m and not exceeding 3.0 m in depth complete all as specified and as directed by Engr-in-Charge. |
| 21 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid and tested complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-charge. |
| 23 | M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15cm deep after laying the cable ie total 23 cm) complele all as specified and as directed. Note:- Punned thickness shall only be measured and paid. |
| 24 | M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ complete laid dry flat complele all as specified and as directed. |
| 25 | M&L for cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregates) as in foundation, filling in mass concrete complete all as specified and as directed. |
| 26 | M&L for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) as in pedestal/coping including necessary weathering and form work and finishing the exposed surface fair and even complete all as specified and as directed. |
| 27 | Taking out old unserviceable LT under ground cable any type from trenches, pipes & poles complete all as specified and as directed. |
| 28 | Supply and laying XLPE LT 1100 Volt grade, armoured under ground cable of size 16 sqmm 2 core with stranded aluminium conductor in trenches /passing through pipes/ on poles etc complele all as specified and as directed. |
| 29 | All as per srl item No 28 above but size of cable 16 Sqmm 4 core complele all as specified and as directed. |
| 30 | All as per srl item No 28 above but size of cable 25 Sqmm 4 core complele all as specified and as directed. |
| 31 | All as per srl item No 28 above but siae of cable 35 Sqmm 3.5 core complele all as specified and as directed. Note for ser item No. 28.00 to 31.00:- Excavation, earthwork and protection of cable shall be measured and paid seperately. |
| 32 | Supply and fixing street light analog type timer switch panel board suitable for 3 phase, 4 wire, 415 V, fabricated in an approved factory with 2mm CRCA sheet steel IP 54 for outdoor pole /wall mounting, powder coating in approved shade with weather proof canopy and lock 32 Amps operating voltage 415 three phase, capable of multiple daily operation with real time back up, power contactor 4 pole 32 Amp relay, MCB TP complete all as specified and as directed. |
| 33 | Supply and fixing street light astronomical/ digital timer switch panel board suitable for 3 phase, 4 wire, 415V, fabricated in an approved factory with 2mm thick CRCA sheet steel IP 54 for outdoor pole /wall mounting powder coating in approved shade with weather proof canopy and lock 32 Amps operating voltage 415 three phase, capable of multiple daily operation with real time back up, power contactor 4 pole 32 Amp relay, MCB TP complete all as specified and as directed. |
| 34 | Taking down unserviceable light fittings from the high mast by lowering the high mast by winch & motor including checking the unserviceable parts like electronic driver, copper wire link, unserviceable hight mast light, overhauling rope wire, rope wire, nut, bolt, clamp rewinding of motor 2 HP and re-fixing the fittings back to its original position after carried out all necessary repairs to make the fitting serviceable complete all as specified and as directed. Note:- Light fitting, connecting wire, driver etc to be replaced shall be measured and paid separately under respective items here-in- after. |
| 35 | M&L for augering of holes in true horizontal position under road /pavement by means of mechanical rig after doing ultrasound technique to prevent any damage to existing cables/pipe lines coming in route 1.5 Mtr deep and not exceeding 15 Mtrs long including laying HDPE pipe of 100mm dia complete all as specified and as directed. |
| 36 | M&L for defect rectification LT cable laid in trenches by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. including and additional excavation in normal alluvial strata required for exposing the cable fault removal of deteriorated portion of cable treating of cable and keeping the same ready for jointing work for cable of size up to 400 sqmm 3.5 core. The fault locating equipments shall be brought to site within the hours of instructions from Engr-in-Charge. |
| 37 | Supply & jointing heat shrinkable straight through joint suitable for LT 1100 Volt grade XLPE cable of size 120-150 sqmm 3.5 core complete with treating of cable to make ready for jointing complete all as specified and as directed. Make:- 3M / Denson/Reychem |
| 38 | All as per item No. 37 here in before but suitable for cable size 70-95 sqmm 3.5 core complete with treating of cable to make ready for jointing complete all as specified and as directed. Make:- 3M / Denson/Reychem |
| 39 | All as per Srl item No. 37 here in before but suitable for cable size 25-50 sqmm 3.5 core complete with treating of cable to make ready for jointing complete all as specified and as directed. Make:- 3M / Denson/Reychem |
| 40 | M&L for galvanised steel tube, light grade with all fittings complete laid in trenches/ road / Path/ on pole of 40 mm bore complete all as specified and as directed. |
| 41 | Supply and fixing GI tubing, light grade, 50 mm bore with all fittings laid in trenches / pole / wall for protection of cables in repairs complete all as specified and as directed. |
| 42 | Supply and fixing GI tubing, light grade, 80 mm bore with all fittings laid in trenches / pole / wall for protection of cables in repairs complete all as specified and as directed. |
| 43 | Supply and fixing MCCB 250 Amps 4 pole 36 kA 415 Volts 50 Hz with thermal adjustable magnetic settings, necessary conection including taking out old existing unserviceable MCCB from panels etc complete all as specified and as directed. |
| 44 | Description all as per srl item No. 43.00 here in before but 200 Amps 36 kA complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Description all as per srl item No. 43.00 here in before but 160 Amps 25 kA complete all as specified and as directed by Engineer-in-Charge. |
| 46 | Description all as per srl item No. 43.00 here in before but 125 Amps 16 kA complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Description all as per srl item No. 43.00 here in before but 100 Amps 16 kA complete all as specified and as directed by Engineer-in-Charge. |
| 48 | Description all as per srl item No. 43.00 here in before but 63 Amps 16 kA complete all as specified and as directed by Engineer-in-Charge. |
| 49 | Disconnection of electric supply and taking out old unserviceable LT outdoor panel complete all as specified and as directed by Engr in charge. Please Enable Macros to View BoQ information |
| 50 | Disconnection of electric supply and taking out old unserviceable LT outdoor panel complete all as specified and as directed by Engr in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender