Tender For Repair To Boundary Wall, Fencing And Compound Wall To Certain Units Of Engr Regt, Eme Bn, Sikh, Fd Hosp, Ind Div C In The South Zone Area Under Ge Dipatoli
Tender Value
49 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
11 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Boundary Wall, Fencing And Compound Wall To Certain Units Of Engr Regt, Eme Bn, Sikh, Fd Hosp, Ind Div C In The South Zone Area Under Ge Dipatoli
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (Wood, steel or RCC ) any section including taking out embeded portion and making good disturbed ground posts embeded in Concrete, brick work, masonery complete all as directed by Engr-in- Charge. |
| 2 | Dismantling of barbed wire in any desc and position and removing from site all as directed |
| 3 | Excavation in post holes or similar holes in soft lloose soil each not exc 0.5 Cum getting out ,returning, filling and ramming earth in layers not exceeding 25 cm, watering and removing surplus soil to a distance nexc 50 mtr and making good surface complete all as specified and as directed by Engr-in- Charge. |
| 4 | S&F in repair galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type if standard rail s straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staple or steel pins etc complete all as specified and as directed by Engr-in-Charge. |
| 5 | All as per item No 4 above but restraining resecuring the existing barbed wire including making good staples etc complete all as specified and as directed by Engr-in-Charge.. |
| 6 | Dismantling of fencing wire mesh including tie rods, flat iron etc any type, complete all as directed. |
| 7 | Supply only chain link MS galvanised fencing, any size or type as complete all as specified and as directed.Note:- Diameter of wire and size of mesh of chain link fencing shall be approved by GE and weight shall be ascertain by a Board of Officers. |
| 8 | Fixing only chain link fencing including line wires,any mesh, size and type to any type of standard ,rails,straining bolts etc. including provison of binding wire complete all as specified and as directed by Engr-in-Charge. |
| 9 | S& F Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, orscrewed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long but length of bolt exc 5cm but n exc 10cm long |
| 10 | S&F mild steel Round bars 10 mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as directed. |
| 12 | S&F MS work as in fencing posts angle iron/Tee section, drilled and countersunk for bolusters running bars, including embeding in concrete and scuring etc, post and struts in fencing including cuting tops to shape as directed, drilled holes, notching for wire, etc, flat iron fillets, (for securing wire mesh etc,) holding pr riveting etc, and similer work confirming to Fe-290 Gde E-165. all as directed |
| 13 | M&L for in applying two coats of synthetic enamel paints over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of surfaces complete all as specified and directed by the Engineer-in-Charge. |
| 14 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc not exceeding 10 Sqm on plan and getting out in soft soil complete all as directed. |
| 15 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in each layer as in soft / loose soil complete all as directed. |
| 16 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as directed |
| 17 | M&L for PCC (1:4:8) type D-2 using 40mm graded stone agg as in foundation filling mass concrete complete all as specified and as directed by Engr-in- Charge. |
| 18 | Demolition of brick work built in cement mortar or cement lime mortar including all quoions, arches pillar etc complete all as directed. |
| 19 | M & L for brick work with subclass “B” Old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 20 | M&L for preparation of old decorated surfaces of wall, chajjas, soffit of chajja, slab projection etc of any height of bldigs and applying one coat of cement base paint complete as specified and directed by engr-in-Charge at site. |
| 21 | Complete removal of existing treatment and preparing the surface of walls of any height of bldigs and apply two coat of cement base paint over a coat alkali resistant primer and as directed by Engr-in-Chare at site. |
| 22 | complete removal of existing treatment on wall of any height of bldigs by brooming down with wire brushing, stoping and applying two coats of exterior weather coat/ plastic emulsion under one coat of primer by mechanical applicator, complete all as specified and as directed by Engr-in-Charge |
| 23 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with with water etc and including (a) 15mm thick rendering in CM 1:4 of any height of bldigs with WPC (WPC will be measured and paid separately)fair and even surfaces.(b) preparation of new plastered surfaces and applying two coats of cement base paint on wall of any height of bldigs all as specified and as directed by Engr-in-Charge. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed. |
| 25 | M&L for coloured glazed ceramic colour tiles in vertical surface in Skirting/Dados 350mmx250mmx7mm /450x350x7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and as directed by Engr-in-Charge. |
| 26 | M&L for 16-18mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete. all as directed |
| 27 | Demolition of cement concrete(un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc all as directed. |
| 28 | Demolition of cement concrete(reinforced) of any description and in any position not otherwise specially provided etc all as directed. |
| 29 | M&L for providing pre-cast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover slabs, set in cm 1:4 including necessary form work complete all as specified and as directed by Engr-in-Charge. |
| 30 | M&L for mild steel deformed TMT bar 10 mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engr-in-Charge. |
| 31 | All as per Srl item No 30 here in above but 8mm dia |
| 32 | Dismantling of interlocking tiles of any description and any thickness and removing from site complete all as directed. |
| 33 | M&L for machine preesed precast concrete glazed interlocking paver block any shape and size over sand/stone dust cusion confirming to IS 15658-2006 of 60mm thickness M-40 Grade with grey cement & pigment complete all as specified and as directed by Engr-in-Charge. |
| 34 | -Diito- all as per item No 33 as above but except tiles |
| 35 | M&L for Sand filling under interlocking tiles including watering and consolidation complete all as specified and as directed by Engr-in-Charge. |
| 36 | M&L for preparation of old painted surfaces of curve stone any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed. |
| 37 | M&L for 100mm thick PCC 1:2:4 Type D-2 using 40mm graded stone aggregate as in alternate bay as hard standing finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 38 | M&L for forming contraction(Dummy) joints 65mm deepx10mm wide, filled with sealing compound grade `A' and all as directed by Engr-in-Charge. |
| 39 | M&L for 50mm thick PCC type B1, 1:2:4 (using 20mm graded stone agg) as in flooring/hardstanding laid in alternate bays and all as specified and directed by Engr-in-Chaerge. |
| 40 | M&L for coloured pre- polished chequered cement concrete tiles with grey cement and no pigment 25cm x 25 cm x 25mm thick , over 15mm thick screed bed in CM 1:6, set jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engr-in-Charge. |
| 41 | M&L for 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in base in hardstanding/floor complete all as specified and as directed by Engr-in-Charge. |
| 42 | Dismantling of asbestos cement sheets, corrugated or semi corrugated etc in roof covering complete and set a side all as directed. |
| 43 | S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed. |
| 44 | S&F pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed. |
| 45 | S&F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welde tubes confirming to IS 1161-1998 grade St-240. complete all as specified & directed |
| 46 | S &F for mild steel rolled sections of Fe 410W (Gde 250 ) quality A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. complete all as directed S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender