Tender For Provision Of Dressing Room Cum Toilet For Bldg No. T-34 At Bos Line And special Repait To Bldg No. P-28/1 To 28/04 Jcos Md Accn At W Wing Of 513 Ad Regt And special Repair/Replacement Of Wiring & Misc E/M Work In Bldg No. P-7 & P-22 Under
Tender Value
47.49 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
5 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Dressing Room Cum Toilet For Bldg No. T-34 At Bos Line And special Repait To Bldg No. P-28/1 To 28/04 Jcos Md Accn At W Wing Of 513 Ad Regt And special Repair/Replacement Of Wiring & Misc E/M Work In Bldg No. P-7 & P-22 Under Age B/R Ii And E/M Under Ge Babina.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Aug-2026 | Corrigendum No 1 | Date | 17-Aug-2026 |
| 2 | 10-Aug-2026 | Corrigendum No II | Date | 25-Aug-2026 |
| 3 | 18-Aug-2026 | Corrigendum No IV | Date | 29-Aug-2026 |
| 4 | 18-Aug-2026 | Corrigendum No III | BOQ | 29-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in any description and in any position not other wise specifically provided for complete all as specified at site. |
| 2 | Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including on the roof top/mumty/parapet/RCC chajjas/RCC water tank and including removal of rubbish out side complex (MOD land) distance not exceeding 100 Rm complete all as specified and directed. |
| 3 | Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete. |
| 4 | M&L old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed. |
| 5 | M&L Brickwork with fly ash Modular bricks in cement mortar, straight or curved on plan exc 6m mean radius, in half brick thick walls built in cement mortar 1:4 in complete all as specified and as directed |
| 6 | Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc. |
| 7 | M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surface of wall rendering is to be finished even and fair with out using extra cement with water proofing compound etc complete all as specified and as directed. |
| 9 | M&L rendering 5mm thick in cement mortar 1:4 on ceiling surface and finished even and smooth with out using extra cment |
| 10 | Supply only integral water proofing compound complete all as specified and as directed. |
| 11 | M&L for repeairing of RCC projection, Chajjas, columns, beams, Parapet wall etc. by necessary preparation i.e scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surfaces of damaged/loose surface and applying one coat of cement slurry and filling the surface with plain cement concrete (1:1.5:3), reinforced with welded or fixed wire mesh and make good by 15mm thick plaster with cm (1:4) and item including scaffolding/ formwork etc upto triple story height complete all as specified and directed by Engr-In-charge. |
| 12 | Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete. |
| 13 | Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete. |
| 14 | Supplying and laying of 20mm CPVC pipes SDR 11 & CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 15 | Supplying and laying of 25mm CPVC pipes SDR 11 & CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 16 | Demolition of RCC water storage tank of size exc. 600x1200x1000 mm but n.exc 1200x1600x1500mm on roof, floor, staging complete and the scrap should be removing to distance of 50m where directed by EIC. |
| 17 | S&F 1000 ltr double foam 5 layer white colour ISO approved rotational moulded polyethylene cylindrical vertical with closed top water storage tank with tank adaptor at Inlet & outlet including 20mm ball valve hoisted and fixed in position on new or existing foundation complete all as specified and directed. |
| 18 | S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 19 | S & F in repair 25 mm dia CPVC gate valve for CPVC pipe complete all as specified and as directed. |
| 20 | S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed. |
| 21 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 22 | S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 23 | S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete. |
| 24 | S&F brass CP mixer (Wall/Sink/Pillar) fency type 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed. |
| 25 | S&F in repair of CP two way bib cock & angle cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and directed. |
| 26 | S&F in repair 15 mm bore angle cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete. |
| 27 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union. |
| 28 | S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete. |
| 29 | S&F of CP health faucet with 8 mm dia, 1.5 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and directed. |
| 30 | S&F in repair 600mm CP towel rail \\"D\\" type fixed to wall with CP brass screws complete all as specified and as directed. |
| 31 | Taking down and breaking up PVC drain pipes set in cement mortar in floors or wall in 110/75mm dia meter complete all as specified and directed |
| 32 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts fixed with MS fastener complete all as specified and directed |
| 33 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts fixed with MS fastener complete all as specified and directed |
| 34 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed |
| 35 | S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and directed |
| 36 | S&F Cast iron Soil, waste and vent spun pipes , in any length with or without ears, with cement joints, fixed to wall 75mm bore including fixing of necessery clamp and taking down old PVC /CI/Concrete pipe. |
| 37 | S&F Cast iron Soil, waste and vent spun pipes , in any length with or without ears, with cement joints, fixed to wall 100mm bore including fixing of necessery clamp and taking down old PVC /CI/Concrete pipe. |
| 38 | S&F Cast iron bends any radious 75mm bore complete all as specified and directed |
| 39 | S&F Cast iron bends any radious 100mm bore complete all as specified and directed |
| 40 | S&F Cast iron branch pieces, single( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore of pipe complete all as specified and directed |
| 41 | S&F Cast iron branch pieces, single( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100mm bore of pipe. |
| 42 | S&F 75mm bore CI floor trap complete all as specified and directed |
| 43 | S&F 100 mm bore CI floor trap complete all as specified and directed |
| 44 | S&F Cast iron cowl 100mm bore complete all as specified and directed |
| 45 | S&F MS powder coated peg set of Six fixing with wall complete all as specified and directed |
| 46 | S&F in repairs sink with drainage board made up of stainless steel 1mm thick for kitchen or laboratory with plug washers and waste fittings including bedding in CM 1:3 into dwarf wall or cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc complete all as specified and as directed by Engineer-in-Charge |
| 47 | S&F wall mounted stainless steel Kitchen plate rack (utensils) over all size 750 x 900 X 250mm made with 0.90 mm thick SS sheet including necessary stainless steel nuts and bolts complete all as specified and directed. |
| 48 | M&L complete removal of existing treament by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit and preparing surfaces of wall complete all as specified and as directed. |
| 49 | M&L for applying Two or more coats on old surface of 100% Premium acrylic emulsion (wetherproof ) copaint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 1mm thick water proof wall putty (for external suface) complete all as specified and directed. |
| 50 | M&L for preparing old decorateed ceiling surface and applying one coat of OBD all as specified and as directed. |
| 51 | M&L for preparation of old treated surface and applying one coat of OBD over a coat of alkali resistant primer over two coat of putty in two layer on wall complete all as specified and as directed. |
| 52 | M&L for preparation new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer etc complete all as specified and as directed. |
| 53 | M&L, preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of primer 10 cm width or girth complete all as specified and as directed. |
| 54 | Dismantling of Stone slabs and tiles of any description or thickness in floors, approns, kitchen plateform / shelves etc.Complete all as specified and directed |
| 55 | M&L for vitrified tiles 800x1200 mm, 9 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:6) complete all as specified and as directed. |
| 56 | M&L for vitrified ,coloured and printed tiles GVT MATT / GLOSSY FINISH of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm as inon vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed. |
| 57 | M&L for vitrified ,coloured and printed tiles GVT MATT / GLOSSY FINISH of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm as in flooring over and including 15 mm thick cement screed in (1:6 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 58 | M&L for Lord buddha or other shed in 8-10 mm thick glossy /cristal finish spiritul vitrified wall tiles premium quality size 600x1200 mm x 7 mm thick as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed. |
| 59 | M&L for non skid coloured joint free ceramic tiles 300x300, 7to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc and including 15 mm screed bed with CM(1:6) complete all as specified and as directed. |
| 60 | M&L for glazed coloured ceramic tiles 300x600x7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed. |
| 61 | M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, etc complete all as specified and as directed. |
| 62 | M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15 mm thick in CM(1:6) etc complete all as specified and as directed. |
| 63 | M&L 35-40mm thick Rough dressed stone slab flooring, laid dry but jointed & pointed in CM(1:3) etc.complete all as specified and as directed. |
| 64 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete. Note: Including cutting of hole as required at site for taking down and making good of disturbed portion with brick work of CM 1:6 or PCC 1:2:4, complete all as specified and as directed. |
| 65 | All as per item no. 64 here in before but exc 1.5 Sqm and n exc 4 sqm each complete all as specified and as directed. |
| 66 | Taking down and Refixing in the same opening of door/window/cupboard wooden shutter of any description not exceeding 1Sqm and not exceeding 2 Sqm each including easing and adjusting as required complete all as specified and as directed. |
| 67 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with cement solvent cement complete all as specified and as directed. |
| 68 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and as directed. |
| 69 | S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed.Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate. |
| 70 | S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed.Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate. |
| 71 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed. |
| 72 | S&F 30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed. |
| 73 | S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size with PVC doors etc complete. |
| 74 | S&F butt hinges medium weight cold rolled, mild steel and fixed 75 mm size etc complete all as specified and directed |
| 75 | S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and directed |
| 76 | S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and directed |
| 77 | S&F 'D' type stanless steel handle decorative type 300mm long bright finished all as per design/ pattern approved by Engineer-in-Charge |
| 78 | S/F 125 mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked. |
| 79 | S&F mild steel, 300 mm ordinary door spring including roller and roller plate etc complete. |
| 80 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy. |
| 81 | Supply and fix 250 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge. |
| 82 | S&F 1.25 mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and as directed |
| 83 | S&F of framed work as in doors or gates of angle or other section with gusset plates, rails,braces,etc.,complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-410-W (Gde-E-250). |
| 84 | S&F SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 85 | S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 86 | S&F 18 mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including beading on cutting /exposed edges, complete as in palmate boxes and kitchen cabinet and cupboard or in any type complete all as directed.Make : Rajshri /Black Cobra |
| 87 | S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete. |
| 88 | S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap etc complete. |
| 89 | S&F 100 mm SS cupboard handle complete all as directed. |
| 90 | S&F in repair of magnatic catcher for cupboard and kitchen cabinets, complete all as specified and directed. |
| 91 | Supply and fix 150 mm long stainless steel decorative handle fixed with screws complete all as specified . |
| 92 | Supply and fix 150 mm long stainless steel hinge for cabinets auto close , concealed type complete all as specified . |
| 93 | Supply and fix Stainless steel Telescopic type ball bearing drawer channel of any size complete all as specified . |
| 94 | Supply and fix Stainless steel kitchen basket of size 17\\" X 20\\" X 4\\" size complete all as specified . |
| 95 | Ditto as Item No- above but of size 17\\" X 20\\" X 6 \\" . |
| 96 | Ditto as Item No- above but of size 17\\" X 20\\" X 8 \\" . |
| 97 | Supply and fix Stainless steel dust bin holder 10 \\" dia complete all as specified and as direcetd . |
| 98 | Supply and fix stainless steel bottle pullout of size 106 mm X 476 mm X 130 mm complete all as specified . |
| 99 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 100 | M&L for 50 micron powder coated aluminium sliding window shutters (shutters to be slide in suitable track system) (three panel shutter) fabricated out of section for outer frame having weight not less then 1.17kg/Rm, sliding window shutters (02 Nos glazed & 01 gauzed) for made of sections all round having weight not less than 0.42 kg/Rm top rail , bottom rail and verticle styles and midlle rail of shutter having weight not less then 0.368 kg/Rm, including 3.5 mm thick plain selected quality glass SS wire cloth 0.36 mm dia and apperture 1.40 mm including providing powder coated aluminium handle , cleats and glazing clip special and suitable auto lock system , rubber gasket etc complete all as specified and as directed. |
| 101 | M&L for 50 micron powder coated aluminium glazed window shutters (One No glazed ) side hung type, including fabricated out frame work of required size and frame having weight not less then 0.667kg/Rm without sash bars made of shutter sections weighing 0.55 kg/m including providing necessary powder coated aluminium fittings joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type C-21 100mm long (2 no.) aluminium handle (1 no.) per shutter etc including 3.5 mm thick plain selected quality glass, SS wire cloth 0.36 mm dia and apperture 1.40 mm and shutter provided etc complete and as directed. |
| 102 | M&L for 50 micron powder coated aluminium glazed ventilator fixed/openable type, without sash bars using approved powder coated aluminium sections weighing 0.55 kg/m etc including 3.5 mm thick selected quality figured glass complete all as specified and as directed. |
| 103 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. |
| 104 | S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe 290. Gde-E-165. |
| 105 | S&F 4.0mm thick tinted glass of selected quality in square not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 106 | M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 107 | M&L cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cement including 4 mm thick glass dividing strip of figured glass, pin headed type, 75mm wide inserted in position as per directed by Engr-in-charge |
| 108 | Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loo-se soil. |
| 109 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in filling & mass concrete in floor and sunken portion complete all as specified and as directed by Engineer -in-charge. |
| 110 | M&L for ISI mark 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU Mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 111 | Removal of existing roof treatment , including picking, sweeping cleaning of existing roof treatment i.e APP membrane, brick/PCC tiling incl cement mortar and open up RCC roof slab upto mother slab including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance, scales, oil or any other loose material etc. complete all as specified and directed. |
| 112 | M&L for making of v groove of roof crackes in mother slab and filling the crack with crack filling chemical (Dr. fixit 201 crack X paste/ asian paint smartcare crack seal or equvelant) complete all as specified and directed. |
| 113 | M&L for making of v groove of roof crackes in mother slab and filling the crack with crack filling chemical (Dr. fixit 201 crack X paste/ asian paint smartcare crack seal or equvelant) complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 25, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 day
Aug 29, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 days
Aug 29, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender