Tender For Repair / Replacement And Upgradation Works As Joinery, Plumbing, Floor And Wall Tilling ,And Repair/ Renovation / Improvement Of Bathrooms, Kitchens, False Ceiling Works And Other Connected Items In Mes Offrs Mess, Living Area In Aor Of Ag
Tender Value
40 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
17 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement And Upgradation Works As Joinery, Plumbing, Floor And Wall Tilling ,And Repair/ Renovation / Improvement Of Bathrooms, Kitchens, False Ceiling Works And Other Connected Items In Mes Offrs Mess, Living Area In Aor Of Age B/R-Ii Under Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Form work to edges of roof slab, RCC bands etc n.exc 200mm complete all as specified. |
| 2 | M&L RCC slab supported on walls , beams & colmns etc as in roof & the like using M-25 using 20mm stone aggregate complete as specified. |
| 3 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality all as specified and directed. |
| 4 | All as per the description of srl item No 03 but 6 to 10mm dia bars as in strips spacers and binders complete all as specified. |
| 5 | M&L for brick work with sub class'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 |
| 6 | M&L Glazed ceramic digital coloured tiles (size 1200 x 600 x 10-12mm) as in vertical surfaces set & jointed in neat cement slurry & pointed with white or coloured cement to match including Rendering 15 mm thick in CM (1:4) as in backing coat for fixing wall tiles complete all as specified. |
| 7 | M&L for non skid, ceramic coloured tiles of size 600x 600mm x 10-12 mm thick in floors/shelves etc, set & jointed in neat cement slurry & pointed in coloured cement to match including bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specifed and directed. |
| 8 | Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete. |
| 9 | S&F Bib taps, long body, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed of the following makes : (Jaquar,cera,hindware(queo) all as specified.code OPP CHR-15037 |
| 10 | S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (concealed type) complete. |
| 11 | S&F for Gun metal gate valve with iron wheel head ,screwed both ends for iron pipe and fixed 20 mm bore complete all as specified. |
| 12 | S&F Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified.make : kich / jaquar / hindware |
| 13 | S&F 600 mm x 750 mm beveled edge mirror of selected quality glass, mounted on 6 mm thick fixed to wall with chromium plated brass screws and cup washers etc rectangular LED mirror for bathroom duall sided glow with warm matwal & ceil light touch sema wall incl electric points complete all as specified. |
| 14 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified. |
| 15 | S&F VC (Star white) WHB counter top type of size 550x 400mm including CP waste fitting, complete all as specified and directed. Make: parryware - CAT part no.C041K4H , Hindware Cat par no. 91088 or equivalent. |
| 16 | S&F PVC connections 15 mm size with PTMT nuts of length 600 mm long complete. |
| 17 | M&L for 18 to 20 mm thick Black Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed by the Engineer-in-Charge.Note:- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account. |
| 18 | Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified. |
| 19 | S&F in repair 18/19 mm thick WPC Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard, bathroom cabinet etc all as specified and directed |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid prelaminated design flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, make : Fenesta/ Oko Teck/ Alstomie all as per direction of Engineer-In-Charge.Note:- stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified. |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed. |
| 22 | S&F factory made uPVC any colour three track three panels sliding window with flyproof S.S. wiremesh ( Two nos. glazed & one no. wiremesh panels ) upto 1.50m ht made of big series frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 + 0.20mm and single glazing bead/ double glazing beading of appropriate dimension ( Area of window upto 1.50 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame & sash shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass and SS wire mesh fixed and drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note:- For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made |
| 23 | Supply and laying of CPVC pipes 20mm outer diameter SDR 11 & Plain/brass CPVC SDR 11 fittings on walls/ceiling or laying in floors, all as specified. |
| 24 | M&L 20 mm bore tubes medium grade galvanised , with all fittings and fixed, complete to walls, ceiling or laid in floor all as specified. |
| 25 | Taking down Wall panelling and similar work as specified as diracted.. |
| 26 | S&F Solid WPC Wall Lining consisting of 12mm thick Single Side Prelam colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 27 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing |
| 28 | S&F factory made uPVC any colour fixed glazed window/ventilator made of ( small series) frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 + 0.20mm and single glazing bead of appropriate dimension ( Area upto 0.75 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note:- For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made Make : Fenesta /AIS / Okotech |
| 29 | S&F UPVC pannels filling suitable for door complete all as specified and directed by Engr-in-charge |
| 30 | S&F in repairs vitreous china coloured European type WC of P or S trap , Wall mounted (single piece EWCs with duroplast slim seat cover and twin flush fittings) including connection to drain and fixing bolts, Plastic water closet seat cover RIM Wall hanging tith vovetn flushing and VF Seat cover SIZE 535 X 370 X 335 MM complete all as specified and directed. NOTE:- The rate quoted by the contractor for the above item is inclusive of all fittings and fixture and for entire completion of work. |
| 31 | S&F fancy type brass chromium plated toilet paper holder, complete all as specified. |
| 32 | S&F in repair fancy type brass chromium plated soap dish, complete all as specified. |
| 33 | S&F in repair fancy type 15mm dia brass chromium plated basin mixer SENCER Faucet for with braided hose for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified. |
| 34 | S&F in repair fancy type chromium plated quarter turn brass angle valve type suitable for 15mm bore pipe complete all as specified Make: Jaquar FLR 15053PM, CERA F2014201, Hindware F570043” |
| 35 | S&Fin repair fancy type stainless steel towel rack size 600mm x 300mm including apair of brass bracket |
| 36 | S&F stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified . |
| 37 | S&F in repairs bib tap long body , 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified |
| 38 | S&F in Soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note:- Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 39 | “S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304,6mm size rod thickness including :-(I) Premium magic corner directed by Engr in charge |
| 40 | S&F 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified. |
| 41 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified. |
| 42 | S&F 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all as specified. |
| 43 | M&L for 12mm thick POP false ceiling incl wire mesh and aluminium framed grid alongwith nuts and bolts as in ceiling fixed with screws as per manufactures instructions incl reinforced with expanded wire mesh and applying two coats of plastic emulsion paint over a coat of primer on exposed surfaces including step up adn down designer 10 mm tick POP false ceiling (Gypsum anhydrous) & Wall lining eleptical, half round or as approved design, shape & pettern 3mm thick water proofing wall care putty as in ceiliing on gyp board/POP/RCC complete all as specified and directed by Engr - in - Charge. Note:- Design of ceiling incl Cove etc shall be as approved by GE. |
| 44 | Taking up or down steel tubing 15 mm and connections, including cleaning for refixing or removal to store |
| 45 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m and n.exc 4.00 sqm each and removing to store complete all as specified. |
| 46 | M&L for non skid ceramic tiles 7 to 8 mm thick area of each tiles excedding 0.18 sqm but not excedding 0.38 sqm in floors in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 inclduing dismantling of existing complete all as specified and as directed. |
| 47 | M&L for glazed ceramic ceramic tiles with highlighter concetp in matching pattern of size exc 0.42 sqm and n exc 0.80 sqm as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles over and incl 15 mm thick rendring in CM (1:4) including dismantling of wall tiling complete all as specified and directed. |
| 48 | S&F Stainless steel basket (Perforated Cutlery Basket SS) of size 445mm x 485mm x 100mm made with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 3575 or equivalent in IPSA/Hettich as approved by Engr-in-Charge). |
| 49 | S & F for Stainless steel thali/plate basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. |
| 50 | S&F Stainless steel plain basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. |
| 51 | S & F 8 mm thick Toughned glass fixed as in doors, windows, partitions and similar work including cutting to shape, drilling holes required icluding frosted on one side etc complete all as specified and directed |
| 52 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in staps, jambs, pillers, window-cills, cooking platforms and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as spd over and incl 15mm thick screed bed in CM (1:4) |
| 53 | S&F in repair 15mm Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. Make : Jaqaur Cat Part No. PRS-CHR-077 and equivalent in Jaquar, Hindware and Kohilar as approved by GE |
| 54 | S&F in repair Vitreous China urinals 900 X 450 MM full stall type white urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; Sencer flusing operator |
| 55 | M&L Brass chromium plated bottle traps for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed |
| 56 | S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed. |
| 57 | S & F in reapir Vitreous chinaware table top wash hand basin (WHB) of size 640x500x130 mm complete including 32 mm dia chromium plated waste coupling, etc., complete all as specified and as directed. (Make : Jaquar JDS-WHT-25943or equivalent in Cera or Parryware). |
| 58 | S & F Towel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed (Make : Jaquar/Marc/Kohler). |
| 59 | S& F in repair Toilet paper holder Chromium plated brass fancy type complete all as specified and as directed by Engineer-in-Charge |
| 60 | S&F automatic soap dispenser of capacity 0.80 Ltr made of aluminum/ABS material, complete all as specified and directed. |
| 61 | S&F paper towel dispenser of capacity 600 towels made of 304SS grade , complete all as specified and directed. Make & Cat Part : Jaquar-Cat No. PTD-SAP-DT0106CS or equivalent in Marc and Kohler. |
| 62 | S&F in repair 15mm quarter turn brass angle valves, chromium plated cast copper alloy, polished body screwed down, high pressure,suitable for 15mm bore steel tubing complete all as specified & directed. ( Make : Jaquar / Marc / Kohler) |
| 63 | S&F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed. |
| 64 | S&F in repairs CP Health faucet including flexible pipe of 1 m length fixing to 15m dia pipe with brass check nut complete all as specifed and directed. (Make- Cera Cat Part No F8030103/ Hindware Cat Part No F160068 CP/ Jaquar Cat Part No-ALD-573). |
| 65 | S&F rectangular shape urinal partition with 10mm frosted glass of size 900mm x450mm including brackets and screws. Make : Jaquar/Marc/Kohler |
| 66 | S&F in repair hand dryer fancy type complete all as specified and as directed by Engineer-in-Charge |
| 67 | S&F in repair shoes sineing cleaning machine fancy type complete all as specified and as directed by Engineer-in-Charge |
| 68 | S&F in repair steel dustbinToilet paper holder Chromium plated brass fancy type complete all as specified and as directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender