Tender For Repair/ Replacement Of Garbage Pits, Fencing/ Security Wall/ Compound Wall, Storm Water Drain, Cover Slab, Pathway, Abetment And Misc B/R Work At Domestic And ‘G Block At Aft Stn Gurgaon Under Ge (Af) Gurgaon No. 1
Tender Value
54.97 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
22 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Garbage Pits, Fencing/ Security Wall/ Compound Wall, Storm Water Drain, Cover Slab, Pathway, Abetment And Misc B/R Work At Domestic And ‘G Block At Aft Stn Gurgaon Under Ge (Af) Gurgaon No. 1
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick work built in cement mortar including all qoins, arches, pillars, etc. complete all as specified and as directed. |
| 2 | Material and Labour for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed. |
| 3 | All as per Srl item No. 2.00 here in before but except bricks .Note:- Serviceable bricks obatined from srl item No. 1 shall be re-used under this item after cleaning etc complete all as specified and directed. |
| 4 | Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth for foundation etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 6 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 7 | Material and Labour for cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed. |
| 8 | Material and Labour for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate as in coping and similar works including necessary form work complete all as specified and as directed. |
| 9 | Supply and Fix in repair Galvanized 2 stand Steel Barbed wire 2.00mm dia barbed with dia barbs at 75 mm spacing and straining and fixing to any type of stsnderd rails, straining bolts,including securing or tying at crossings with and provisuion of galvanised mild steel pins, etc incl taking down of existing barbed wire as directed (each line wire to be measured) complete all as specified and directed. |
| 10 | Supply and Fix in repair 950/650/450 mm dia concertina coil reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/ Clips for tying at crossing complete including taking down of existing concertina coil all as specified and directed. |
| 11 | Taking down cement Plaster, any description on Brick Walls or on concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. |
| 12 | Material and Labour for for rendering 15mm thick in CM (1:4) on brick work or concrete surfaces brick work, finished fair & even w/o using extra cement all as specified and directed by Engr-in-Charge. (WPC paid and measured seprately) |
| 13 | Material and Labour for for rendering 15mm thick in CM (1:4) on brick work or concrete surfaces other than fair faces all as specified and directed.Note:- (WPC paid and measured seprately) |
| 14 | Supply only liquid water proofing compound mix cement concrete/cement plaster as per manufacture instruction all as directed. |
| 15 | Material and Labour preparation of new plaster surface on wall two coat of weather proof exterior grade paint over a coat of primer all as directed. |
| 16 | Demolition in cement concrete ground floor and paving exc. 15 cm thickness (below or above ground floor ) all as directed. |
| 17 | Material and Labour 75mm thick Cement concrete type C-2,1:3:6 (40 mm gradd aggregate) graded stone aggregate as in path finished even smooth with broom finished w/o using extra cement, laid in alternate bays all as directed. |
| 18 | Material and Labour for Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, incl watered, rammed & rolling with moorum or red bajri to a true surface, complete all as specified and directed. |
| 19 | Material and Labour providing 100mm thick cement concrete 1:4:8 type D-2 using 40mm graded aggregate in sub base of floor complete all as specified and directed by Engr-in-Charge. |
| 20 | Material and Labour providing 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded aggregate in sub base of floor complete all as specified and directed by Engr-in-Charge. BB32 |
| 21 | Demolition of Stone slabs and tiles/paver of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 22 | Material and Labour 60 mm Machine pressed pre casted pressed cement concrete inter locking paver blocks glazed coloured up to 6mm on the top in any shape and size, strenth not less than M-35 incl 25mm thick sand cushioning all as directed. |
| 23 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 24 | Dismantling of Stone slabs and tiles/Paver of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 25 | Material and Labour Chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with gray cement and pigments in any colour machine preassed glazed , over cement screed bed 15mm thick cement motor 1:6 all as specified and as directed by Engr-in-charge.make nitco/arena or equivalent all as specified and directed. |
| 26 | Dismantling of wall/ floor tile including backing coat any description or any thickness beded and pointed in any cement motar and removal to out of MD land complete all as specified and as directed.. |
| 27 | Material and Labour for Granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform, verticle surfaces and any position in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl screed bed 10mm thick in CM 1:4 incl chamfering and rounding of edges where required all as specified and directed. |
| 28 | Material and Labour for 10 mm thick glossy finsih for parking/ path (squar / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 10 mm thick screed bed in cement mortar in 1:4, complete all as specified and as directed. |
| 29 | Taking down and refixing for mild steel gate & wecket gate at any size including welding/cutting and fixing in RCC Column complete all as specified and as directed. |
| 30 | Demolition of RCC of any descrition and in any position not other wise specially provided for complete all as specified and directed. (reinforcement cut as required to facilitate demolition). |
| 31 | Material and Labour for rough finished concrete surface formwork to sides of pillars, posts, struts, piers, columns (square/ rectangular) and stanchions etc complete all as specified and as directed. |
| 32 | Material and Labour steel deformed bars (TMT bars) 10mm dia, and over in reinforcement, cut to length, bent to shape required, incl. cranking, hooking ends, binding with and including mild steel (annealed) binding wire not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 33 | All as per Srl Item No. 32.00 above, but 6 mm to 8mm dia bars. Spacer and striups complete all as specified and as directed. |
| 34 | Material and Labour for RCC (Nominal mix) type B-1, 1:2:4 (20mm graded aggregate) in columns, pillars, piers, posts and struts,complete all as specified and as directed. |
| 35 | Removing/ Re-fixng for stainless steel letter at any size on grinate wall/piller complete all as specified and directed. |
| 36 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all as specified and directed. |
| 37 | Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 38 | Dismantling of mild steel work of any description not other wise provided of all as direted. |
| 39 | Supply and Fix Steel work in tubular trusses, pillars and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 all as specified and directed. |
| 40 | Supply and Fix for MS as in posts and struts in fencing angle including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing with mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 (Gde-E-165 quality-B. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement all as specified and directed. |
| 41 | Supply only Chain link MS galvanised fencing, any size or type all specified and directed. |
| 42 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and directed. |
| 43 | Material and Labour expanded metal not exc four kg per sqm, cut to length, bent to shape required and tying with and including annealed muild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed. |
| 44 | Material and Labour for Preparation new steel surface exc 10 cm width/girth one coat red oxide primer and two coat of synthetic enamal paint all as specified and directed. |
| 45 | Dismantling of plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern roor coverings all as specified and directed. |
| 46 | Supply and Fix 0.50 mm thick pre coated thick galvalume aluminium zink coated GI based corrougated steel sheeting of any colour having tansile strength of 550 MPA as in roof covering/glading to wall fixed with self tapping screws complete all as specified and directed. |
| 47 | Supply and Fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 48 | Supply and Fix 1mm mild steel, plain black sheet hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required and directed. |
| 49 | Restriaining resecurig including making good staples or tighting of cross wire galvanised barbed wire in any dia of wire or any spacing all as specified and directed. |
| 50 | Material and Labour washed stone grit plaster on exterior walls in two layers under layer 12mm cement plaster 1:4 (1cement 4coarse sand) furrowingthe under layer with scratching tool applying cement slurry @ 3kg/sqm top layer 15mm cement plaster 1:1/2:2 ( 1 cement 1/2 coarse sand : 2 stone chipping coloured 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing & washing the top layer with brushes & water to expose the stone chipping complete all as speacified pattern decided. (payment for providing grooves shall be made separately).Note:- Top layer of shade be of white cement using colouring pigment & stone chipping of desired colour as approved. |
| 51 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 52 | Supply and Fix single side writing informatory stainless steel reflective sign board size 4'x3' having with aluminium sheet base of 2 mm thickness having retro reflective tape base and font. Colour and matter of sign board will be furnished by Engr-in-Charge. The frame of sign board should be 2\\" outer dia square Stailness steel pipe and having 2 legs of stainless steel square pipe 9' link each of 2\\" outer dia swuare pipe the board should be grouted in PCC work of size 300x300x450 mm including taking down of existing all as specified and directed.(a) SS Sign Board = 4'x3' =12 sq ft.(b) Stainless steel post with f type shape 50 mm OD =m 9'x2= 18 R ft Please Enable Macros to View BoQ information |
| 53 | Supply and Fix single side writing informatory stainless steel reflective sign board size 4'x3' having with aluminium sheet base of 2 mm thickness having retro reflective tape base and font. Colour and matter of sign board will be furnished by Engr-in-Charge. The frame of sign board should be 2\\" outer dia square Stailness steel pipe and having 2 legs of stainless steel square pipe 9' link each of 2\\" outer dia swuare pipe the board should be grouted in PCC work of size 300x300x450 mm including taking down of existing all as specified and directed.(a) SS Sign Board = 4'x3' =12 sq ft.(b) Stainless steel post with f type shape 50 mm OD =m 9'x2= 18 R ft Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender