Tender For Repair/Maint Of Certain Internal Electrication Work Incl Replacement Of Various Unsv Light Fittings/ Fixturs & Db Switch Inside Cod & 505 Abw Area Under Ge (North) Delhi Cantt-10
Tender Value
40 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
2 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Certain Internal Electrication Work Incl Replacement Of Various Unsv Light Fittings/ Fixturs & Db Switch Inside Cod & 505 Abw Area Under Ge (North) Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing all as specified and directed. |
| 2 | M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces complete all as specified and directed for One light / bell / buzzer point controlled by one, one way switch 06 Amps. |
| 3 | All as per the description of srl item No 02 here-in-before but one fan point controlled by one, one way switch 06 Amps. |
| 4 | All as per the description of srl item No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and as directed. . |
| 5 | All as per the description of srl item No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and as directed. |
| 6 | All as per the description of srl item No 02 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed. |
| 7 | S&F switch piano flush type, 06 Amps, single pole, one way, 230 volts complete all as specified and as directed. |
| 8 | S&F switch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole two way complete all as specified and directed by Engineer -in-Charge. |
| 9 | S&F switch piano flush type, 16 Amps, single pole, one way, 230 volts with switch frame complete all as specified and as directed. |
| 10 | S&F socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 230 volts with socket frame complete all as specified and as directed. |
| 11 | S&F socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 230 volts with socket frame complete all as specified and as directed. |
| 12 | S&F ding dong bell, AC, 230 volts, single pole complete all as specified and as directed. |
| 13 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed. |
| 14 | S&F ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified and as directed. |
| 15 | Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for Mylinc / Coral / Sleek model accessories etc and making good to the disturbed surfaces complete all as specified and directed for one light point controlled by one, one way switch 06 Amps. |
| 16 | All as per the description of srl item No 15 here-in-before but one bell point controlled by one bell push switch 06 Amps. |
| 17 | All as per the description of srl item No 15 here-in-before but one ceiling / Exhaust fan point controlled by one, one way switch 06 Amps. |
| 18 | All as per the description of srl item No 15 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch. |
| 19 | All as per the description of srl item No 15 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch. |
| 20 | All as per the description of srl item No 15 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed. |
| 21 | Supply and fixing modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete all as specified & directed. |
| 22 | Supply and fixing modular bell push with indicator, 06 Amps, single pole, one way, 230 volts, complete all as specified & directed. |
| 23 | Supply and fixing modular switch, with indicator, 16 Amps, single pole, one way, 230 volts, one module complete all as specified & directed. |
| 24 | Supply and fixing modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed. |
| 25 | Supply and fixing modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter complete all as specified & directed. |
| 26 | Supply and fixing modular ceiling fan regulator, 02 module, AC, 230 volts, 120 watts, duly ISI marked complete all as specified & directed. Note:- Make/Model for Srl Item 21 to 26 shall be as per existing at site. |
| 27 | Supply and fix lamp holder, PVC / Polycarbonate fancy type suitable for batten fitting including 9W LED bulb complete all as specified and as directed. |
| 28 | S&F 10/12W LED TL fitting (2 fit) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete |
| 29 | S&F on wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4'), with extruded aluminium heat sink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete. |
| 30 | S&F in reapair decorative wall mounting light SS finish fixture with extruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 Watts LED bulb for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete |
| 31 | S&F LED luminaire 600 mm x 600 mm x 70mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete complete. |
| 32 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts & washers complete |
| 33 | Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts & washers complete, |
| 34 | Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. and all accessories complete, arrangements for mounting of fitting ,taking down of existing u/s highbay lights etc all as per site requirement including connecting up with provision of PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections complete. |
| 35 | Supply and fixing LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. and all accessories complete, arrangements for mounting of fitting ,taking down of existing u/s highbay lights and etc all as per site requirement including connecting up with provision of PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections complete. |
| 36 | Material and labour for sub main wiring with 2 x1.5 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring. |
| 37 | All as per the description of srl item No 36 but for 02 x2.5 Sqmm for phase & neutral and 01x2.5 Sqmm for continuous earth wire |
| 38 | All as per the description of srl item No 36 but for 02 x 4 Sqmm for phase & neutral and 01x4 Sqmm for continuous earth wire |
| 39 | All as per the description of srl item No 36 but for 02 x 6 Sqmm for phase & neutral and 01x6 Sqmm for continuous earth wire |
| 40 | S&F in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete |
| 41 | S&F in replacement industrial type TPN enclosure with a three pin and neutral and earth plug and socket complete with and including 32 Amps MCB, four pole, AC, 415 volts and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete |
| 42 | S&F in replacement industrial type TPN enclosure with a three pin and neutral and earth plug and socket complete with and including 63 Amps MCB, four pole, AC, 415 volts and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete |
| 43 | S&F in replacement sheet metal enclosure distribution board, single pole and neutral, AC, 230 volts, 08 way, with 200 Amps rated copper bus bar and metal double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete |
| 44 | All as per the description of srl item No 43 here-in-before but 12 way |
| 45 | S&F in replacement sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed with and incl. of followings :- (a) MCCB, 125 Amps, 04 pole, AC, 415 Volts,16 KA - 01 No. (b) MCB, SP, AC, 230 volts of 06 to 32 Amps, \\"C\\" curve, 10 KA - 12 Nos. |
| 46 | S&F sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 06 ways with 400 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed with and including of the following:- (a) MCCB, 250 Amps, 03 pole, AC, 415 Volts, 25 KA - 01 No. (b) MCB, SP, AC, 230 volts of 63 Amps, \\"C\\" curve, 10 KA - 20 Nos. |
| 47 | S&F in repair MCB, SP, AC, 230 volts of 06 to 32 Amps capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using copper lugs complete |
| 48 | S&F in repair MCB, DP, AC, 230 volts of 40 Amps capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using copper lugs complete |
| 49 | S&F in repair MCB, DP, AC, 230 volts of 63 Amps capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using copper lugs complete |
| 50 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200/250mm, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed |
| 51 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed |
| 52 | S&F in repair MCCB, 63 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete |
| 53 | S&F in repair MCCB, 100 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed. |
| 54 | S&F in repair MCCB, 125 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete. |
| 55 | S&F in repair MCCB, 160 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete |
| 56 | S&F in repair MCCB, 200 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete |
| 57 | S&F in repair MCCB, 250 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete |
| 58 | S&F or passing through pipe, 25 Sqmm, 2 core, 1100 Volts grade, heavy duty, multi-stranded, PVC insulated, aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed service cable for service connections from existing LT Panel/Pole to DB/busbar chamber including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete |
| 59 | S&F or passing through pipe, 50 Sqmm, 3.5 core, 1100 Volts grade, heavy duty, multi-stranded, PVC insulated, aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed service cable for service connections from existing LT Panel/Pole to DB/busbar chamber including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete |
| 60 | Supply and fix air circulator fan, steel body AC single Phase. 230V oscilating suitable for wall mounting of size 450 mm sweep heavy duty complete and taking down old one with and incl all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed |
| 61 | Taking down exhaust fan any make carefully,supply and fixing exhaust fan steel body AC single phase 230 Volts of size 600 mm sweep heavy duty with blade and frameand louvers complete all as specified and as directed. |
| 62 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete . |
| 63 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep heavy duty with, blades, and frame and louvers and taking down old exhaust fan and depositing to MES store yard, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed |
| 64 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers and taking down old exhaust fan and depositing to MES store yard all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed Please Enable Macros to View BoQ information |
| 65 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers and taking down old exhaust fan and depositing to MES store yard all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender