Tender For Provn Of Overhead Shed At Main Gate Of Sahapur Mil C And Provn Of Interlocking Tiles Behind Bldg No T-11 (Otm Accn), P-1 & P-2 (Md Accn Complex) At Sahapur Mil C And Provn Of Mosquito Proofing Window At Open Duct Near periodical renewal Gu
Tender Value
25.70 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
18 days left
EMD
51419
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Overhead Shed At Main Gate Of Sahapur Mil C And Provn Of Interlocking Tiles Behind Bldg No T-11 (Otm Accn), P-1 & P-2 (Md Accn Complex) At Sahapur Mil C And Provn Of Mosquito Proofing Window At Open Duct Near periodical renewal Gurung Enclave Area To Bldg No P-143 To P-145 At Od Kolkata And Addn/Altn To Toilet Bldg No P-108 And T-81 At Od Kolkata And Physical Checking / Marking Of Old Vintage Reinforced Cement Concrete Over Head Tank Incl Pump House And Ancillary Of 121 Inf Bn (Ta) Garh Rif For Demolition Under Ge (C) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work: PROVN OF OVERHEAD SHED AT MAIN GATE OF SAHAPUR MIL CAMP AND PROVN OF INTERLOCKING TILES BEHIND BLDG NO T-11 (OTM ACCN), P-1 & P-2 (MD ACCN COMPLEX) AT SAHAPUR MIL CAMP AND PROVN OF MOSQUITO PROOFING WINDOW AT OPEN DUCT NEAR PR GURUNG ENCLAVE AREA TO BLDG NO P-143 TO P-145 AT OD KOLKATA AND ADDN/ALTN TO TOILET BLDG NO P-108 AND T-81 AT OD KOLKATA AND PHYSICAL CHECKING / MARKING OF OLD VINTAGE RCC OVER HEAD TANK INCL PUMP HOUSE AND ANCILLARY OF 121 INF BN (TA) GARH RIF FOR DEMOLITION UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 3 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 4 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) nexc. 1.50 Sqm each including cutting holes in wall for hold fast complete all as specified and directed. |
| 5 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 6 | Taking up or down steel tubing 15mm dia and connection complete all as specified and directed |
| 7 | All as per item No. 08 above but 20mm dia bore. |
| 8 | Dismantling Plain or Corrugated Steel Sheeting any gauge, thicknesscomplete all as specified and as directed. |
| 9 | Dismantling of timber scantling unframed work 40sqm and over iron in any position unframed work complete all as specified and directed |
| 10 | Demolition of cement concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 11 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debris/ rubbish, etc., complete all as specified and as directed. |
| 12 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed. |
| 13 | Dismantling Wrought Iron or Mild Steel Work of any description not otherwise provided and any position for complete all as specified and as directed. |
| 14 | Demolition of Cement Concrete (un-reinforced) in ground floor and paving exec 15cm thick above or below GL complete all as specified and directed |
| 15 | Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed |
| 16 | Dismentling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed |
| 17 | Demolition and make small pieces of RCC (roofs, floors, beams, staricase, landing, chajjas and similar suspended work) of any description and in any position not otherwise specially provided for and complete all as specified and directed |
| 18 | Removing building materials etc to a distance upto 1.0 Km or under beyond the lead included in the rates including loading, unloading and stacking at the destination complete all as specified and directed |
| 19 | Dismantling of water tank capacity exceeding 250Ltrs and not exc 500 Ltr and removing to stores complete all as specified and directed |
| 20 | Taking down 15mm bore bib tap of cast copper alloy with crutch or butterfly handle chromium plated scrwed down, scrwed for iron or for brass ferrule and removing to stores complete all as specified and directed |
| 21 | Taking down 20mm bore gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe and removing to stores complete all as specified and directed |
| 22 | Surface excavation not exc 30cm deep and avg 15 cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 23 | Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. or for cable/water supply pipe line protection not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 24 | Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 25 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed. |
| 26 | Removing excavated material ( soils of any type) n exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 27 | M&L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 28 | M&L Plain Cement Concrete type D2 (1:4:8) using 40mm graded aggregate 75mm thick in Sub-bases, finishing concrete surfaces rough and even, complete all as specified and as directed. |
| 29 | M&L Plain Cement Concrete type B-0, (1:2:4) (12.5mm graded crushed stone aggregate) as in copings, kneelers, apex stones, bed plates, kerb including form work and finishing all exposed faces of cement concrete complete all as specified and as directed. |
| 30 | M&L Cement Concrete type B0 (1:2:4) (12.5mm graded aggregate) 25mm thick, in Flooring, finishing concrete surfaces fair and even, complete all as specified and as directed. |
| 31 | M&L Formwork to Sides of Concrete Founda-tions, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed. |
| 32 | M&L for TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 33 | M&L TMT Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, as in stirrups spacers and binders complete all as specified and as directed. |
| 34 | M&L TMT Bars 8 to 10 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, as in stirrups spacers and binders complete all as specified and as directed. |
| 35 | M&L TMT Bars 6 to 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, as in stirrups spacers and binders complete all as specified and as directed. |
| 36 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof Bore in pipe in 75mm to 150mm complete all as specified and directed. |
| 37 | M&L Brick work using Pulverizes fly ash bricks of class designation 75 (kgf/cm2), straigth or curved on plan exc 6m mean radius built in CM (1:4) cmplete all as specified and directed. |
| 38 | M&L fly ash bricks pulverizes using old size bricks class description 75 (kgf/cm2)straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified and directed. |
| 39 | M&L Glazed Ceramic Coloured Tile 450x300x6-7mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed. |
| 40 | M&L Cement Concrete type D2 (1:4:8) using 40mm graded aggregate 100mm thick in Sub-bases, finishing concrete surfaces fair and even, complete all as specified and as directed. |
| 41 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath parks, lawns drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand compacting and proper embedding laying of inter vibrator filling the joints with fine sand bedding layer through vibratory compaction by using plate vibrator filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified |
| 42 | M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and fair complete all as specified and directed |
| 43 | M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound as per manufacturer instruction complete all as specified and directed |
| 44 | M&L rendering 15mm thick in CM (1:3) on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound as per manufacturer instruction complete all as specified and directed |
| 45 | Supply only liquid water proffing compound as required |
| 46 | M&L Rendering 10mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces finished the surfaces even and fair complete all as specified and directed |
| 47 | M&L Preparing new plastered Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as specified and as directed. |
| 48 | M&L Preparing on newly plaster surfaces wall and applying 3 coats of white wash complete all as specified and as directed. |
| 49 | M&L Preparing on newly plaster surfaces ceiling and applying 3 coats of white wash complete all as specified and as directed. |
| 50 | S&F PVC (SWR) Bend 110mm bore (dia), any type etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 51 | M&L preparation of new steel surface of any description and applying two coats of synthetic paint and one caot of primer all as specified and directed by Engineer-in-Charge |
| 52 | Material and Labour RCC (Nominal mix) 1:1.5:3 ( Using 20mm graded crushed stone aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 53 | M&L Rolled Mild Steel Work in Tubular /hollow section as trusses, purlin , rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-4923 grade YSt.-240 complete all as specified and as directed. |
| 54 | S&F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-290 Gde-E165) complete all as specified and directed. |
| 55 | M&L Mild Steel Screw Bolts (machine made) 20mm to 25mm diameter of neck and length of bolt exc. 30 Cm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed. |
| 56 | M&L Mild Steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed. |
| 57 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated /semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (Hi-Rib 30/200 profiled sheet for roofing and clading application. The profiled sheet having the total width 1060mm, rough depth 30mm and pitch 200mm C/C). The sheet is cold formed out of above mentioned specification and fixed with wind tie as per requirement complete all as specified and directed. |
| 58 | S&F Plain, Aluminium sheeting thickness 0.71mm, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed. |
| 59 | Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel plaint over a coat of red oxide all as specified and directed by Engineer-in-Charge. |
| 60 | S&F Drop ends (for spigot or socket ends) or nozzles 1mm thick for 125mm dia complete all as specified and as directed. |
| 61 | S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed in trenches or in floor, complete all as specified and as directed. |
| 62 | S & F in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 63 | M&L for complete removal of existing treatment of old surfaces and applying two coats of oil bound distemper (any colour/tint) over a coat of primer (Asian Paint / Berger Paints) including a coats (approx 1.5mm thick) of white cement based putty complete all as directed and specified. |
| 64 | M&L preparing newly plastered surfaces and applying 2 coat of oil bound distemper over a coat of primer including a coat of white cement based putty (approx 1.5mm thick) complete all as specified and directed. |
| 65 | S&F for anodised aluminum frame with powder coating (Min thickness of coating 50 micron) for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed |
| 66 | S&F anodised aluminum powder coating of any colour (Minimum thickness of powder coating 50 micron) window and ventilator shutter side huge type without sash, aluminum sections weighing 0.55Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings for each shutter such as peg stay 150mm long (1Nos), hings type B-21 100mm long 02 Nos, 01 Nos tower bolt 150mm of extruded section complete all as specified and directed |
| 67 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper bedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as pecified and as directed. |
| 68 | S&F Rolled Mild Steel work in Roof trusses (framed) , trussed , purlines, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or Flat section) including distance pieces , cleats etc Fe-410W (Gde E-250 Quality `A') complete all as specifed and directed. |
| 69 | M&L for preparation of new surfaces of Steel and Steel based materials of any descriptions over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified. |
| 70 | Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good cutting not exc 10Cm girth. |
| 71 | S&F for 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 72 | M&L rendering 10mm thick in CM (1:3) as in ceiling surfaces even & smoth without using extra cement complete all as specified and directed |
| 73 | S&F in repair vitreous china squatting pan orrissa pattern size 580x440mm white with intregal foot rest including connection to trap, and flusing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified. |
| 74 | M&L in repair UPVC (SWR) 75mm bore branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branch or fitted with oval access doors complete all as specified and as directed |
| 75 | M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 76 | S&F powder coated aluminium ventilators with louvers and glazing including frame of section over all size of window 600X450mm complete with following specification. (a) Alu frames of size 45x45x1.2mm (b) Rail & Stile 45x45x1.2mm thick (c) 4.80mm thick frosted sheet glassNote :- All ventilators/louvers member including fitting & fixture shall be deem to included quoted rate. Only measure opening size of ventilators/louvers |
| 77 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 78 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 79 | S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed |
| 80 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed |
| 81 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed |
| 82 | S&F 75mm Butt hinges, heavy duty cold rolled mild steel and fixed complete all as specified and directed |
| 83 | S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed. |
| 84 | S&F in repair vitreous china half stall urinal, white including CP spreader and including 32mm CP water couping, PVC waste pipe etc complete all as specified and directed |
| 85 | S&F in repair vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling 32mm waste pipe complete all as specified and directed. |
| 86 | S&F in repair PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed |
| 87 | S & F in repair for 15mm bore brass chromium fancy type plated Angular Valve with Wall Flange complete all as specified and directed. Make : Essco (MQT-526KN) or equivalent from Hindware/Prayag |
| 88 | S & F mild steel chromium plated Health faucet (ABS Body) with 15mm Dia, 1.25 Meter long flexible tube and ABS wall hook including wall hook with making connection and fixed in position complete all as specified and directed. |
| 89 | S & F for CP bib taps 2 way with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type with wall flange complete all as specified and directed.Cat Part Essco (TQT-526A) of prayag (PIS-11) or equivalent from approved make |
| 90 | S&F pillar tap bore dia of pipe 15mm fancy type, cat copper alloy with capstan heads chromium plated, scrwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed |
| 91 | S&F UPVC (SWR) 110mm bore Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches or fitted with oval access doors as in repair complete all as specified and directed. |
| 92 | S&F UPVC (SWR) 75mm bore vent cowls complete all as specified and as directed. |
| 93 | S&F for UPVC (SWR) 75mm bore bend any radius complete all as specified and directed |
| 94 | S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed |
| 95 | S&F in repair for vent pipe single socket UPVC (SWR) pipe type 'B' 75mm bore with rubber ring joint any radius complete all as specified and directed |
| 96 | S&F for Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof Bore in pipe in 75mm to 150mm complete all as specified and directed |
| 97 | S&F in repair Single socketed UPVC (SWR) pipe 110mm bore with rubber ring joint any radius complete all as specified and directed. |
| 98 | S&F triple layer PVC water tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 500Ltr with and including ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 25mm bore outer diameter for CPVC pipe and making connection for inlet and outlet including dismental of old water tank and removing from site complete all as specified and directed |
| 99 | S&F CPVC pipes 25 mm diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors complete as all specified and as directed. |
| 100 | M&L for Concrete bed Type D-2 (1:3:6) (Using 40mm graded crushed stone aggregate) to 200mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed |
| 101 | M&L for 200mm dia Reinforced concrete pipes, class NP-2, laid in trenches and jointed with cement mortar and tested complete all as specified and directed. |
| 102 | M&L for Precast reinforced cement concrete Type A-1 (1:1:5:3) as in cover slab, landing slab etc set in CM 1: 4 complete all as specified and directed |
| 103 | M&L for 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and fair complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 104 | M&L chequered cement concrete tiles 40cm x 40cm x 25mm thick with mixture of white and grey cement in equal proportion and no pigment, set, jointed and pointed in neat cement slurry in floors over cement screed bed 20mm thick in CM 1:6 complete all as specified and directed |
| 105 | Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, FTL fittings and making good to the disturbed surface complete all as directed by Eng-in-Charge. |
| 106 | Dismantling the 100mm dia / bore of water pipe line GI / CI including taking up/down old /s one complete all as specified and directed |
| 107 | Dismantling the 150mm dia / bore of water pipe line GI / CI including taking up/down old /s one complete all as specified and directed |
| 108 | Dismantling the 200mm dia / bore of water pipe line GI / CI including taking up/down old /s one complete all as specified and directed |
| 109 | Dismantling the 100mm Slucie Valve including taking up/down old u/s one complete all as specified and directed |
| 110 | Dismantling the 150mm Slucie Valve including taking up/down old u/s one complete all as specified and directed |
| 111 | Dismantling the 200mm Slucie Valve including taking up/down old u/s one complete all as specified and directed |
| 112 | Taking out unsv UG cables of any type and any size from trenches etc and removing from the site of work complete all as specified and directed |
| 113 | Taking down MCB DBs of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed. |
| 114 | Taking down submain wiring any size complete all as specified and directed. |
| 115 | Taking down ceiling fan, exhaust fan carefully and depositing to MES store |
| 116 | M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed.Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.. |
| 117 | All as per item No. 129.00 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge. |
| 118 | All as per item No.129.00 here-in-before but one 3pin switch socket outlet 5A on independent board complete all as specified and directed by engineer incharge. |
| 119 | M&L fo Point wiring surface type with 2.5 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of casing caping (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 2.5 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLSH copper cable as earth continuity wire connecting to common earth point (including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting sockets for 5 pin, 16 Amp Switch socket combination on independent board complete all as specified and directed. |
| 120 | M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 2.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories including fabricated 1.6 mm thick MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 2.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one Switch socket combination 15 amps incl Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3, cutting not exceeding 10 cm girth in brick walls etc complete all as specified and as directed. |
| 121 | S&F Switch piano, flush type, SP, one way, 5/6 Amps 230/240 Volts, white/ivory finish complete all as specified and directed. |
| 122 | S&F Switch socket combination multipurpose 2 in 1, 3 pin 6 Amps 230/240 volt flush type complete all as specified and as directed. |
| 123 | S&F Socket outlet 3/5 pin, 6 Amps, 240 volt flush type complete all as specified and as directed. |
| 124 | S&F Switch socket combination multipurpose 2 in 1, 3 pin 15 Amps 230/240 volt flush type complete all as specified and as directed. |
| 125 | S&F Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed. |
| 126 | Supply and fixing LED lights fitting 1x 20W, 220V,AC wall mounted batten box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge. |
| 127 | S&F building security light pressure die cast housing with individual LEDs with modular secondary optics security light luminaires 35 watt LED with 50mm dia light grade GI pipe bent to shape of 45'' 1.5 mtr long and nuts bolts including fixing arrangement after taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 128 | S&F Sheet metal enclosure for DB's when MCBs to be used 4 way single pole and neutral double door with 200 amps rated bus bar complete 240 volts complete all as specified and as directed. |
| 129 | S&F MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve breaking capacity 10 kA complete all as specified and as directed. |
| 130 | S&F MCB 40 to 63 Amps, DP 240 Volts ,C- Curve breaking capacity 10 KA including necessary connection complete all as specified and as directed. |
| 131 | S&F MCB 32 Amps, DP 240 Volts ,C- Curve breaking capacity 10 KA including necessary connection complete all as specified and as directed. |
| 132 | M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 2.5 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 2.5 Sqmm as earth lead drawn into rigid PVC casing caping of size not less than 20mm including all fittings complete all as specified and as directed.Note:- Two runs of 2.5 Sqmm conductor as main wire and one run of 2.5 Sqmm conductor as earth wire with one run of PVC casing caping shall be measured as one unit. |
| 133 | Supplying and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with all the connection as directed. |
| 134 | Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, wire projected by 15 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed. |
| 135 | S&F Energy efficient LED fittings of capacity 1 x 10W wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed. |
| 136 | Supply and fix 25mm bore Gun metal, globe or gate valves (ISI marked) ( Class-I) with iron wheel head, screwed high pressure with handle with iron wheel head both ends complete as specified and as directed including taking out unserviceable one |
| 137 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 16 Sqmm 2 core in trench/duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. |
| 138 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m including making good to disturbed wall surface as per existing finish including taking down old unsv one complete all as specified and as directed |
| 139 | S&L double wall corrugated pipe (DWC) conforming to IS 19430 Part-I of size 50mm outer dia and 38mm inner dia complete all as specified and directed |
| 140 | Supply and laying 25mm bore GI pipe medium grade with all fittngs in trenches/floor/wall all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender