Tender For Repair/ Maintenance To Roofs And Allied Work Services To Various Infrastructures At Af Stn Dalhousie.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
20 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Roofs And Allied Work Services To Various Infrastructures At Af Stn Dalhousie.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling timber scantling 40 sqcm and over in section in any position complete all as specified and directed by engineer in charge. |
| 2 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed by engineer in charge. |
| 3 | S & F Fe 410-w(Gde E 250)quality B rolled mild steel in roof trusses (framed) trussed, purlins, crane gantries, rails and framing (beam, tee, angle, channel or flat sections) including distance pieaces cleats etc complete all as specified and directed by engineer in charge. |
| 4 | S & F Fe 410-w(Gde E 250)quality B MS plates plain or chequered square cut or notched forming holes drilled or welded any thickness complete all as specified and directed by engineer in charge. |
| 5 | M&L for Painting to steel surfaces with two coat of synthetic enamal paint over one coat of redoxide primer complete all as specified and directed by engineer in charge. |
| 6 | Dismantling of wall or ceiling boards (fibre,pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets |
| 7 | Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with GRS (Glass Fiber Reinforced Gypsum) false ceiling tile of size 595X595 mm of approved texture ,design and pattern having moisture content less then 2 %, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225 :1987, Noncmbustiible as per IS 476 (part 4)-1970 and light reflectance of 855 (minimum) to be laid in true horizontal level suspended on interlocking metel T grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120 gms per sqm including both side) comprising of main T runners of size 15X32 mm length 3000mm ,cross T of size 15X32 mm of length 600mm to from grid module of size 600mm X600mm suspended from Ceiling using galvanised mild steel items (galvanizing @ 80 gms per sqm) i e 50mm long ,8mm outer dia M-6 hanger rod upto 1000mm length and L shape level adjuster of size 85X25X2mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications ,drawing and as per direction of the Engr- in Charge. |
| 8 | Dismantling plain or corrugated steel sheeting any gauge thickness, including nanital or similar patteren roof covering complete all as specified and directed by engineer in charge |
| 9 | S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 complete all as specified. |
| 10 | S&F 0.63mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified. |
| 11 | S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour haveng strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified . |
| 12 | S&F Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.5 mm thick of an colour haveng strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified . |
| 13 | M & L for preparation of new steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st base coat in single colour and 2nd coat in camoflauged pattern with atleast three colours) as approved by user and directed by Engineer-in-Charge over a coat of moderant solution to remove zinc coating complete all as specified and directed by Engineer-in-Charge |
| 14 | Demolition of brick work built in CM including all quoins arches pillars etc complete all as specified and directed by Engineer-in-Charge |
| 15 | Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks complete all as specified and directed by Engineer-in-Charge |
| 16 | All as per item No.85 above but except brick, complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 19 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender