Tender For Repair/Maint Of Bldg Lightening Arrester System Including Of Earthing With Misc Connected Item At Afs Pathankot.
Tender Value
44 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
12 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Bldg Lightening Arrester System Including Of Earthing With Misc Connected Item At Afs Pathankot.
BOQ
| Sl. No. | Item Description |
| 1 | Repairing to existing detective earthing by taking out carefully GI/steel /Copper earth plate ,watering pipe ,protection pipe and re-buried the same after removing sludge from the plate or replacement of plate as per site required with connected items .the earth plate shall be buried directly in ground with top edge of earth plate not less than 1.50 m below normal ground level ,connected to GI earth wire or GI/copper earth strip any size by means of nut -bolts,check nuts and washers of galvanised iron or steel all as shown on electrical plate No-03 of MES schedule 2020,part-1 (Specifications) and other work in any type of soil ,adequate quantity of charcoal dust &common salt in alternate layers all around the earth plate mainimum 150 mm in all directions with & including GI funnel made out of .63mm thick GI sheet ,wire gauge ,complete the earthing including testing of earthing on completion of job complete all as specified and directed. Note:-(i) Material like eath plate copper/GI will be measured and paid seperately (ii) all other material like salt charcoal ,GI pipe ,strip wiil be measured in same item as above |
| 2 | Taking down carefully by unscrewing from clamp / saddles plates air termination rods with GI supporting pipe for reuse at site or carrying the MES store complete all as specified and directed by EIC |
| 3 | Refixing air termination rods with GI supporting pipe retrived against item No-1 complete all as specified and directed by EIC |
| 4 | Taking down carefully by unscrewing from clamp / back plates strip any type for reuse at site or refixing at same or other location complete all as specified and directed by EIC |
| 5 | Refixing GI/Aluminium strip retrived against item No-3 complete all as specified and directed by EIC |
| 6 | Supply and fix in replacement for single pointed air termination aluminium rod 12mm dia 300 mm long including nuts & bolts for fixing air termination rod to pole/ pipe duly insulated by providing appropriate insulator all as required at site. |
| 7 | M&L in replacement for PCC 1:4:8 type D2 using 40mm graded stone aggregate as mass concrete for foundation of GI tubing /Air termination rod complete all as specified and directed by EIC. |
| 8 | M/L test point terminal block made of steel plate of size 75x75x6 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hex. head screw complete all as specified and directed by EIC. |
| 9 | Supply and fix in replacement for aluminum strip 25x3.15mm as roof conductor or down conductor or along the pole/pipe complete with saddles/ insulators made out of porcelain or fibere and fixing screws all as required at site or directed. Note :- Insulators should be approved quality & backlite fixing tightly so that it does not fall of during winds / rains. |
| 10 | Supply & fix Supply and fix in replacement forGI strip 32x6mm, buried in ground or fixed to wall etc for loop earthing. |
| 11 | M&L in replacement for earth pit pre cast PCC cover (1:2:4) type B-1 (using 20 mm graded black trap/granite/Basalt stone aggregate) 50 mm thick 400x400mm size cover 12 mm dia round bar handle complete all as specified and directed by Engr-In-Charge |
| 12 | M&L for Painting including cleaning of old existing cement concerte earth pit chamber in colour code as white for convintional ,yellow for copper conventional and red for chemical including preparation od surface ,removel of dust etc and applying two coat of suitable paint complete all as directed by engg-Charge. |
| 13 | M/L Earth continuity conductor or main earthing lead fixed to wall or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia GI steel wire complete all as specified and directed by EIC. |
| 14 | M&L in replacement for test point terminal block made of copper plate of size 75x75x6 mm drilled and screwed including 4 nos 8 mm dia 20 mm long hex. head screw and washer complete all as specified and directed by EIC. |
| 15 | Supply and fixing in replacement Copper plate earth electrode of size 600mm x 600mm x 3mm complete all as specified and directed by Engr-In-Charge. |
| 16 | M/L Earth continuity conductor or main earthing lead fixed to wall or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 6 mm dia copper wire complete all as specified and directed by EIC. |
| 17 | Refixing old steel tubing and connections in new or old position for earthing pit water pipe line of 20 mm bore size |
| 18 | Supply and fix in replacement for copper strip 20x3.15 mm complete with saddles/ insulators made out of porcelain or fibre and fixing screws for roof conductor/down conductor including welding or brazing for joints all as required at site or directed by Engr In Charge. |
| 19 | M&L in replacement for tubing GI light grade 20mm bore for installation of air termination rod and watering for earthing including fixing arrangement all as required and directed.Make- Tata/Jindal |
| 20 | Supply errection and febrication of bracings supports, clamp, and back plates febricated from structural steel section including nuts,bolts,washers for fixing air temination rod on ms sheet roof complete all as specified and directed by EIC. |
| 21 | Supply and fixing in replacement Galvanized iron earth plate electrode of size 600mm x 600mm x 6mm complete all as specified and directed by Engr-In-Charge. |
| 22 | Supply and fixing gun metal , gate vavle 20 mm bore with iron wheel head , screwed both ends from iron pipe complete and all as specified. |
| 23 | S&F bib taps 20 mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed Please Enable Macros to View BoQ information |
| 24 | S&F bib taps 20 mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender