Tender For Supply And Installation Of Equipments For Soil Mechanics Laboratory Of Ce Dept Of Uit

Sharing tender

Tender for Supply And Installation Of Equipments For Soil Mechanics Laboratory Of Ce Dept Of Uit , Supply And Installation Of Equipments For Soil Mechanics Laboratory Of Ce Dept Of Uit , Liquid Limit Device, Hand Operator:- The Apparatus Consists Of A Brass Cup, A Crank And Cam Mechanism, Mounted On A Rubber Base Of A Specified Hardness, A Brass Pin Having A Knurled End , Complete With:Grooving Tool And Gauging Block As Per Is:9259, Is:2720 (Part -V): (1983). , Shrinkage Limit Apparatus:- The Apparatus Conforms To Is:10077(1982), And The Test Is Performed As Per Is:2720(Part Vi) (1983). Perspex Plate With Three Metal Prongs. Perspex Plate Plain. Shrinkage Dish, Glass Cup, Purified Mercury (500 Gm), Onekg Bottle , Straight Edge, Porcelain Evaporating Dish , Flexible Spatula. Complete With Accessories. , Sand Replacement Test Apparatus:- Conforming To Is:2720 (Part- 38) (1983). The Apparatus Consists Of: - Sand Pouring Cylinder Fitted With Conical Funnel, Cylindrical Calibrating Container, Metal Tray With A Hole In The Centre. , Core Cutter Mould And Dolly (Without Hammer):- Conforming To Is:2720 (Part- 29) (1983). The Apparatus Consists Of: - Cylindrical Core Cutter (10 Cm Dia. X 12.73 Cm Hight) , Dolly Or Collar. , Pycnometer:- Conforming To Is:2386 (Part- 3) (1963). Consisting 1 Kg Jar Transparent Perpex /Glass Made With Metal Cone And Locking Ring And Rubber Seal , Permeability Mould :- Conforming To Is:2720 (Part- 29) (1983). The Apparatus Consists Of: - Gun Metal Mould With Collar. Gun Metal Drainage Base Plate With A Recess For A Porous Stone And Fitted With An Intel Valve. Gun Metal Drainage Cap. Gun Metal Dummy Plate To Serve As A False Bottom During Compaction. Porous Stone For Drainage Cap. Porous Stone For Base Plate. , Laboratory Cbr Apparatus, Hand Operator (Both Soak And Unsoak) :- The Apparatus Consists Of :- Cbr Mould With Base Plate And Collar , One Penetration Piston Face. Displacer Block. Surcharge Weight With Central Hole. Perforated Brass Plate With Locknut Stem. Cutting Cutter. 50Kn Load Frame With Proving Ring And Dial Gauge. , Is Test Seive (1.18 Mm):- Conforming To Is:383 (1970). 20Cm Dia. Brass Frame Without Joint With Stainless Wire Mesh ; Size: 1.18 Mm , Is Test Seive(425 Micron):- Conforming To Is:383 (1970). 20Cm Dia. Brass Frame Without Joint With Stainless Wire Mesh ; Size:425 Micron , Laboratory Vane Shear Apparatus, Hand Operated:- Conforming To Is:2720 (Part- 30(1983). The Apparatus Consists Of: - A Torque Applicator With A Supporting Frame Carrying Torque Head Adjustable In Height And A Graduated Drum To Measure The Deformation Of Springs. A Set Of Four Springs, One Each Of 2 Kg Cm, 4 Kg Cm, 6 Kg Cm And 8 Kg Cm. A Vane With A Vane Rod. Specimen Container Carrying Case. , Slotted Weights For Direct Shear Test :- Conforming To Is:2720 (Part- 33) (1983): The Apparatus Consists Of: - Set Of Weights For 6Cm×6Cm Shear Box(0.5 Kg/Cm2, 1.0 Kg/Cm2 , 1.5 Kg/Cm2) , Triaxial Cell Of Triaxial Test Apparatus:- Conforming To Is:2720 (Part- 33) (1983): The Triaxial Cell Complete With All Accessories Should Fit With The Existing Aimil Make Triaxial Unit. Additional Supply Of Pure Mercury 750 Gm To Complete The Demonstration. , Consolidation Mould:- Conforming To Is:2720 (Part- 33) (1983): The Mould Complete With All Accessories Should Fit With The Existing Aimil Make Single Gang Consolidation Apparatus. , Hot Air Oven:- Laboratory Electric Oven, Thermostatically Controlled Temp. Range 50ᵒc To 250ᵒc Double Walled Inner Chamber Made Of S.S. Operable On 230V 50Hz Single , Phase Ac Main. Size: 45 Cm × 45 Cm× 45 Cm (18×18 ×18) With 2 Nos. Tray , Laboratory Desiccators):- Vacuum Desiccator Round Made Of Polycarbonate(Pc) And Polypropylene(Pp). Size: 250 Mm Dia. (Tarson Or Equiv. Make)