Tender For Upgradation Of Craft Community Centre At Saidakadal, Srinagar.(Adv. Cost Rs. 24.67 Lacs) (Incl Cost Of Material+Gst)
Tender Value
24.67 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
1 days left
EMD
49340
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Craft Community Centre At Saidakadal, Srinagar.(Adv. Cost Rs. 24.67 Lacs) (Incl Cost Of Material+Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 15.2.1 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 3 | P/F of 12mm thick T&G planks made of Imported wood (New zealand pine or equivalent) for roof soffits & Ceiling on wood work in false ceiling, partitions sawn and putup in position I/C of budloo wood ( Joists) vertical horizontal as desire at site 2\\"x 2\\". Including cost of necessary adhesive & cost of nails etc. with necessary cornice of required size complete. Incl cost of nails/screws all complete as approved by Engineer-in-charge (Including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 4 | Melamine polishing on wood work (one or more coats) including preparation of surface |
| 5 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thk. |
| 6 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.USING 3MM SPACER AND FILLED WITH EPOXY GROUT IN FILL. Size of tile 600x600 mm |
| 7 | Surface dressing of the ground including removing vegetation and in -equalities not exceeding 30cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m all kin ds of soil. |
| 8 | Supply and laying stone solling graded material ( Quarry ) I/C Consolidation in layers ,I/C Cost and carraiage of materials from source to the site. |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). |
| 10 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Light shade using white cement |
| 11 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of Welded M.s plate 8mm thick ISMB 150 MM |
| 12 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead Of area of 3 sqm. and below |
| 13 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 30 MM THICK IST CLASS KAIL WOOD. |
| 14 | Providing and fixing of glass panes with wooden fillets of required size wherever necessary.Glass panes 3.5mm thick weighing 8.70 Kg / sqm. |
| 15 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Second Class kail wood |
| 16 | Providing and fixing wire gauze shutters using galvonized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: 30MM THICK IIND CLASS KAIL WOOD. |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 18 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100mm Handles |
| 19 | 125mm handles |
| 20 | 200 mm Handles |
| 21 | Tower Bolt 100mm |
| 22 | Providing and fixing bright finished brass door latch with necessary screws etc. complete.: 300x16x5 mm |
| 23 | Supply and instalation testing & commissioning of BEE-4 Star Rated 1.5 ton inverter type split AC Of o-generation /mitsubishi/toshiba or eqvilent make includes indoor & outdoor unit ,Ms angles stand ,copper piping up to 3 mtr,12m flexible drain pipe ,fitting wall cutting & repair and 2 years AMC From date of commissioning for complete job. |
| 24 | Supply and instalation testing & commissioning of 2 KVA (24V) Sine wave power inverter of sukam /luminous /eco-micro make include inverter with LCD Display nos.180 ah tall tubular batteries battery ,trolley ,wiring and 3 years AMC With quarterly servicing for complete in all respect . |
| 25 | Providing and fixing of 25 mm plywood wardroob with shutters and drawers with laminated mica with all accessories hings handles towerbolts etc complete in all respect as per the direction of EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender