Tender For Construction Of 2000 Kl Under Ground Reservoir In Sector-33 (Pi-1 & Pi-2) Oht C Us, Greater Noida.
Tender Value
2.09 Crore
Estimated cost
Bid Submission
03 Aug 2026
12 days left
EMD
4.20 Lakhs
Bank guarantee accepted
Document Fee
3870
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 2000 Kl Under Ground Reservoir In Sector-33 (Pi-1 & Pi-2) Oht C Us, Greater Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Design and construction of semi sunk RCC clear water reservoir with roof slab of required covered area and construction of suitable pump house for Motor Pumps of 1500 KL capacity tentative internal suitable size average depth above GL 150m. including free board 30 cm with cleaning arrangement and i/c all required labour, T&P machine requirement, water power, fuel and lubricants water proofing compound carring out the work in sub soil l/c pumping & bailing out of water etc. including making the structure water tight and leak proof sump portion 7240mm deeper then the floor of the reservoir to accommodate the Boosting Motor Pumps one RCC duct in required side to this sump in plan. having internal size 16000mm x 20000mm. In plan and 3m deeper then the floor of the reservoir are to be constructed of making the arrangement of cleaning of the water, sludge, etc. received from the floor of chamber of the reservoir and the sump made for housing the pumping plant, the work will also including S/F of required size dia CIDF pipes and valves (such as inlet, outlet, washout, over flow etc. pipes) and snowsem finishing walls with acrylic smooth exterior pants including all materials necessary required for jointing erecting such as specials including providing and fixing of Gantry girder unit (in both directions) including one No. of chain pully of 5 tonnes capacity and 25 mtr chain (Indef make) and making suitable arrangement for moving on gartry etc. for proper completion of work as perb direction of E/L. Work shall be executed as ner 15-3370 with latest amendment (PCC-M15 RCC-M30. Cement |
| 2 | PART- B |
| 3 | Erection of Pumping Plant |
| 4 | Supply & Fixing of Submersible pumping plant having CF8M Impeller and 55410F Capable of delivery 4500LPM at 50mtr head and 60 to 65 HP capacity (Make KSB) (AOR) Discharge 4500 LPMHead 50 Mts.Liquid:- Clear Water |
| 5 | Supply & Fixing of fully Automatic Control panel with 75 H.P. star delta Starter for submersible/ V.T. Pump sets with following features No-volt, Under-voltage, Over-voltage protection, Microprocessor based overload protection, Unbalancing protection, Winding temperature controller, seal monitor, reverse rotation trip device and the automatic start/stop device according to the levels in the sump. The control panels are provided with normal indications such as Digital voltmeter, Digital Ammeter, and indicating lamps. Above panel is dust and vermin proof made out of 14 SWG CRC sheet with powder coating paint as per directions of E/L. (Make: Contractor-L&T, MCCB-L&T, WTC-Minilec, Auto Transformer-Electracare, VPD & MPD-Softhard, WLC/SM-Pumpcare C.T. AE, Indicating Light & Push Button-L&T, Control Fuse-EE, Fuse Base-EE, Timer-L&T) (AOR) |
| 6 | Design, supply, Erection, Testing and commissioning of MCC(Motor Control Centre Panel made out of 14-16 SWG.CRCA sheet Powder Coated paint after degreasing drusting & vermin Proof free standing front operated Cubical pannel board suitable for 415 volt 50 HZ system having Incomer of 800 Amp. ACB for D.G. Set an four out going of 250 Amp/MCCB having three nos, aluminium us bars of of 1000 Amp. capacity for three phase & one aluminium bus bars of half capacity for neutral with Amp. meter, Current Transformer Ampere Selector Switch etc. (Make:- ACB-L&T/Schnider/ABB, MCCB/Changeover-L & T/Schnider/ABB Meter-L&T/A.E. Selector Switch-L&T. Current Transformer-Α.Ε.) |
| 7 | 800 Amp ACB-3 Nos. |
| 8 | MCCB-250 Amp.-4 Nos. |
| 9 | MCCB-100 Amp.-6 Nos. |
| 10 | Ampere Meter-12 Nos. |
| 11 | Volt Meter-2 Nos. |
| 12 | C.T. 150/5-18 Nos. |
| 13 | C.T. 250/5-12 Nos. |
| 14 | C.T. 1000/5-6 Nos. |
| 15 | A.S.S-12 Nos. |
| 16 | V.5.5-2 Nos. |
| 17 | S/L of Al. conductor PVC insulated armoured served, sheathed cable 1100 V grate at a depth of below ground level over a cushion of 75mm below ground level over a cushion of 75mm thick sand alround protected with burnt brick on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by E/I complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS-No.-501,P.-127) |
| 18 | 95 Sqmm 3-1/2 Core |
| 19 | 120 Sqmm 3-1/2 Core |
| 20 | Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape, and making connections etc. complete in all respects as per directions of the E/I. (PS-No. 504,P 130) |
| 21 | 240 sq.mm |
| 22 | 120 sq.mm |
| 23 | 70 sq. mm |
| 24 | 50 sq.mm |
| 25 | P/F M.S. specials such as Tee, Bends, Collars, Tapers, Caps etc. suitable for Flange joint made with 10mm thick MS sheet 7.00 complete in all respect as per direction of E/I. NSI-7.00 |
| 26 | Supply & Fixing of flanged type C.I. foot valve (Make- Kirloskar) |
| 27 | 300 mm dia |
| 28 | Supply and fixing Reflex valve/Class-1 (with cap) heavy quality of following sizes including all jointing material and labour required for proper completion of work (Make-Kirloskar) |
| 29 | 300 mm dia |
| 30 | 500 mm dia |
| 31 | Supply and fixing Sluice valve/Class-1 (with cap) heavy quality of following sizes including all jointing material and labour required for proper completion of work (Make-Kirloskar) |
| 32 | 300 mm dia |
| 33 | 500 mm dia |
| 34 | Supply and laying of 1800mm x 900mm x 12mm thick chequered rubber matting of tested quality. (PS-No.1136/P- |
| 35 | Supply and fixing of fire extinguisher, dry chemical type 10.00 kg. capacity (ISI mark) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. (PS-1131(8)/P-146) |
| 36 | Supply and laying of 32mm x 6mm G.I strip from earth electrode directly in the ground as required complete in all respects. (PS-No. 717/P-136) |
| 37 | Supply and burying 900 x 900 x 6mm Gl plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.1. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wiree in 15mm dia Gl Pipe up to switch board (from appron to switch board the cost of Gl pipe and Hl wire will be extra) 30cm. square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer in charge complete in all respect. (PS No.-708 |
| 38 | PART - C |
| 39 | P/L Distribution Pipe Line |
| 40 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of gixth up to 30 cm measured at a height of 1 m above ground-level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 41 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50m and lead upto 30.0m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge upto a distance of 30m from the foundation trenches (where machine not reach/remove) 0.00 to 1.50m Below (SOR-20/Chap-4/P-14) |
| 42 | 0.00 to 1.50m Below (SOR-20/Chap-4/P-14) |
| 43 | Providing and laying S&S Centrifugally Ductile Iron Pipes conforming to IS: 8329 (DSR-18.72.18/50R-20) |
| 44 | 250 mm Cast Iron Class K-9 Pipes |
| 45 | Supply and fixing Sluice valve/Class-1 (with cap) heavy quality of following sizes including all jointing material and labour required for proper completion of work (Make Indian Valve Pvt. Ltd. (IVC)/Kirloskar Brothers Limited (Kirloskar) |
| 46 | 250 mm dia (AOR GNIDA) |
| 47 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) 250 mm dia |
| 48 | 80 mm Dia (DSR-18/18.59.2) |
| 49 | Constructing masonry chamber 90x90x100cm. Inside with 150 class designation bricks work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve/Air Valve with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1) cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 50 | Supply and Installation of required steel pipe 10mm thick conferming to 15:3589 through trenchless excavation of thrust pit and receiving pit of required size and the excavation & filling back & compaction complete as per specification for road crossing y auger boring method. Pipe will be installed at depth beyond 3 below the ground surface in downward required slope |
| 51 | 250 mm Dia MS Pipe |
| 52 | DEWATERING PUMP |
| 53 | Supply, installation, testing & commissioning of non clog submersible dewatering pump to remove sand, silt, clay. sand, pebbles, small rock, algae, shells, plankton, etc. ( with specific gravity of up to 1.1) having Cl casing, CF8 M impeller SS 410 shaft, Cl casing wearing ring & bearing bush, suitable for 3 phase, 415 V, 50 Hz, AC supply, submersible motor having TEFC enclosure with class H/F insulation as per specs and IP 68 protection. The pump shall be operated at suitable rpm as per data sheet with all required accessories. |
| 54 | Capacity: 50 mtr3/hr. |
| 55 | Head : 10 mtrs. |
| 56 | Motor Rating: 3.7 KW |
| 57 | Labour cess and GST will be paid extra as per govt. orders Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender