Tender For Maintenance Work Of (Drain Cleaning, Grass Cleaning, Kerb Stone Repair, Road Marking & Other Allied Work) 130M Wide Road From Saini Rotary To Bhanota Cut For Three Years In Greater Noida.
Tender Value
1.46 Crore
Estimated cost
Bid Submission
30 Jul 2026
8 days left
EMD
2.93 Lakhs
Bank guarantee accepted
Document Fee
2650
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Work Of (Drain Cleaning, Grass Cleaning, Kerb Stone Repair, Road Marking & Other Allied Work) 130M Wide Road From Saini Rotary To Bhanota Cut For Three Years In Greater Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30cms. measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. Out side periphery of area cleared. (SOR-20/259(i)) |
| 2 | Same as above 259(i) above but grass only (SOR-20/259(a) |
| 3 | Tractor with trolley including POL & driver. (SOR-20/S.No-19/Chapter-2) |
| 4 | Supply of labour. ( Based on SOR-20/SN-12/Chapter-2) |
| 5 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. |
| 6 | All kinds of soil (DSR-18/2.28.1/AR) |
| 7 | Tractor with trolley including POL & driver. (SOR-20/S.No-19/Chapter-2) |
| 8 | Supply of labour. ( Based on SOR-20/SN-12/Chapter-2) |
| 9 | Excavation in foundation in ordinary soil (Loam clay or sand) including lift upto 1.50 M and lead upto 30.00M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer incharge upto a distance of 30m from the foundation trenches (where machine con not reach/move) (SOR-20/251 (A)/4.1.1) |
| 10 | Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required (DSR-18/2.24.1/AR) |
| 11 | Eatra for every additional lift of 1.5m or part three of in excavation/banking excavated of stacked materials, 1.50mtr to 3.0 mtr (AR/GNIDA) |
| 12 | Cartage of earth or fly ash when added to schedule item no. 253 : IInd Km. and beyond (SOR-20/261(C)) |
| 13 | Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. paint to be used should confirm ISI no. 105/106/133-1950 (SOR-20/647/15.07) |
| 14 | As in item (647) above but for every subsequent coat on previously treated surface. (SOR-20/648) |
| 15 | Cement concrete with 4cm gaugeApproved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials labour tools & Plants etc required for proper completion of the work |
| 16 | 8:4:1 (1 Cement 4: Coarse sand :8 graded stone aggregate 40mm nominal size) (SOR-20/281/5.08) |
| 17 | M-150 brick work in 1:6 cement & fine sand 1.25 FM mortar in foundation and plinth including supply of all material labour and T&P etc required for proper completion of the work. (SOR-20/303) same as item no 303 but in 1:4 one cement & four fine sand of 1.25 F.M. mortar. (SOR-20/305)Same as item no 305 but in 1:4 one cement & four coarse sand of 2.20 F.M. mortar. (SOR-20/305(A)) |
| 18 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (DSR-18/13.4.2) |
| 19 | Plain/Reinforced Cement concrete in open foundation complete as per Drawing and Technical Specifications. (MORTH-20/9.06/E/Case-II) |
| 20 | RCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20/9.06/E/Case-II) |
| 21 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (DSR-18/5.22) |
| 22 | Thermo Mechanically treated bars of grade Fe-500D or more. (SAIL Steel) (DSR-18/5.22.6/AR) |
| 23 | Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-20/279)Same as above item no 279 but with 2cm gauge stone grit instead of 4cm gauge stone ballast. (SOR-20/279(a) |
| 24 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR-18/16.69) |
| 25 | White washing with lime to give an even shade : Old work (one or more coats) (DSR-18/13.87.2) |
| 26 | Supplying at site :R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge (cost of earth works in excavation, concrete works in foundation to be paid separately). (DSR-18/16.15.1) |
| 27 | Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. (DSR-18/16.17) |
| 28 | With G.I. barbed wire (DSR-18/16.17.1) |
| 29 | Water Tanker with Sprinkler 6000 Litre or above cap. With POL/Driver including filling of water etc. complete (SOR-20/30) |
| 30 | Providing JCB with driver and including POL (SOR-20/S.No31/Chapter-2) |
| 31 | Supply of labour. ( Based on SOR-20/SN-12/Chapter-2) |
| 32 | Supply and fixing SFRC cover over chamber (with out frame). 50mm thick. |
| 33 | size 600x600mm (Mediam duty) |
| 34 | Providing and fixing SFRC cover over chamber. (with frame) 50mm thick. (AR/GNIDA) |
| 35 | size 600x600mm (Heavy duty) |
| 36 | Trenching of ordinary soil upto a depth of 60cm including removal and stacking of serviceable material and then disposal of surplus soil by spreading and neatly leveling within a lead of 50mtr. And making up the trenched area to proper levels by filling with earth or earth mixed with sludge/manure before and after flooding trench with water (excluding cost of imported earth sludge and manure) (AR/GNIDA) |
| 37 | Supply of selection-1/doob grass in carpet at site fresh and free from weeds having proper roots in green including loading, unloading carriage and all taxed paid etc. and as per direction of officer in charge (1 Sqm carpet grass covers 4.0 Sqm area of grassing) 39. Grassing with selection no. 1/doob grass including. (AR/GNIDA) |
| 38 | Grassing with selection no. 1/doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth it needed (The grass and good earth shgall be paid for separately) Pe (1) in rows 5cm apart in both directions (AR/GNIDA) |
| 39 | Hiring of protable RE-cycle jetting cum suction machine mounteed on mahindra bolero maxi with hydraulically operate man-Hole De-silter upto depth of 15 meter with driver for the area of Greater Noida. As directed by Engineer in-charge for 8.50 Hours perday overtime will be paid on pro-Rate basis. pressure 3000PS (min) with 15mtrs suction head and jetting water capacity of 2000 litres. Rate as per Noida. |
| 40 | Complete maintenance of the entire Garden featured having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, ledge, flower, beds foliage creeper etc. including hoeing weeding, pruning, replacement of plants gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizer, (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as per directed by officer in charge, (Cost of good earth, manure, fertilizer, insecticide, pesticide will be provided by the department and lawn mover and brush cutter with fuel and other T&P material/articles shall be provided by contractor) and as per direction officers in charge. play ground and public parks. (AR/GNIDA) |
| 41 | Watering of developed lawn/ground cover area including arrangement of water system and pope etc. complete item (AR/GNIDA) |
| 42 | Supply of Cowdung (AR/GNIDA) |
| 43 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, Rates are inclusive of all taxes, royalty etc. all T&P/machine material and labour required for proper completion of work. (SOR-2020/New item/Sr.No.19.01) |
| 44 | Labour cess and GST will be paid extra as per Govt. orders. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender