Tender For Special Repairs To Sinlge Jco Living Accn And Certain Bldgs Of Hq 72 Inf Bde At Morar Cantt Gwalior.
Tender Value
44.29 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
18 days left
EMD
88594
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Sinlge Jco Living Accn And Certain Bldgs Of Hq 72 Inf Bde At Morar Cantt Gwalior.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 2 | M&L for new plasterd surface applying two coats of distemper oil emulsion white or tinted over and including a layer of 1-2 mm thick wall care putty on wall complete all as specified and directed. |
| 3 | M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement plaster 1:6, finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 4 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 5 | M&L for Brickwork with subclass 'B' bricks old size brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 6 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) incl the disposal upto 50M complete all as specified and directed. |
| 7 | M & L 100mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) for PVC water tank base complete all as specified and directed. |
| 8 | M&L for 25 mm thick cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in leveling course complete all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed. |
| 10 | M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles size exc.0.06 sqm n exc.,0.18 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 11 | M&L glazed ceramic coloured tiles of size 450x350x/6/7 /350x250x7/ 300x200x7mm thick on walls such as skirting and dado and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick rendering in cm (1:4) finished fair and rough as backing coat complete all as specified and directed. |
| 12 | M&L Vitrified cermaic tile 8 mm thick (square/ rectangular) polished area of each tiles n. exc. 0.36 sqm in floor etc set and jointed with neat cement slurry and pointed in colur cement to match over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 13 | M&L for 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 14 | M&L for chequered cement concrete tiles of size 250mm x 250mmx 20 to 22mm thick (ISI marked) of approved colour, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as specified and directed. |
| 15 | M&L Vitrified cermaic tile 8 mm thick (square/ rectangular) polished area of each tiles size n. exc. 0.36 sqm set and jointed in vertical surface/ suck as skirting and dado etc. set and jointed with neat cement slurry and pointed in colour cement to match over & including 10 mm thick rendering in CM (1:4) finished fair and rough as backing coat complete all as specified and directed. |
| 16 | Dismantling of stone slab and tiles of any description or thickness in floor, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 17 | M&L for machine cut Kota stone slab 18 to 20mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed. |
| 18 | M&L for machine cut kota stone slab 18-20 mm thick as in riser / steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 19 | M&L for 5mm thick rendering on faces or brick work ,concrete surfaces, in ceiling & in CM 1:3, finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 20 | M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement plaster 1:4 and mixed with WPC , finished even and smooth (without using extra cement) complete all as specified and directed. (Note:- WPC shall be measured & paid seperately). |
| 21 | Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 22 | M&L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed. |
| 23 | Material & Labour for new plastered surfaces applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 24 | M&L for preparation of old surface and applying one coat of white wash on ceiling inl cornices plastered or un-plastered surfaces complete all as specified and directed . |
| 25 | M&L for preparing of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforecent salt and trading oil and greasy spots plastered or un plastered surfaces of wall including cornices, pilasters etc. and applying two coats of oil emulsion distemper white or tinted complete all as specified and directed. |
| 26 | M&L for complete removal of exiting treatment from external walls (any no of layers ) by scrapping with steel scrappers or any other means, preparation of old surfaces complete applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 27 | M&L for preparation of old surface and applying one coat of white wash on walls inl cornices plastered or un-plastered surfaces complete all as specified and directed . |
| 28 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed. |
| 29 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 25 bore of pipe, complete all as specified and directed. |
| 30 | Supply and laying 20mm dia of bore CPVC pipe SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and directed. |
| 31 | Supply and laying 25mm dia of bore CPVC pipe SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and directed. |
| 32 | S&F in renewal 15mm dia CP bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 33 | S&F in renewal 15mm Angle stop valve of CP brass any colour high pressure screwed for iron pipe or for union fixed complete all as specified and directed. |
| 34 | S&F in renewal PVC connection 15mm size with PTMT nuts on both ends of length 450 mm complete all as specified and directed. |
| 35 | S&F in renewal swivel shower of brass chromium plated of size 125mm for fixing with 15mm bore pipe complete all as specified and directed. |
| 36 | S &F in renewal tublar towel rail aluminium anodised 20mm dia D type 60 cm long between flange brass chromium plated complete all as specified & directed. |
| 37 | S&F in renewal for Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed. |
| 38 | S&F in renewal Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 39 | S&F in renewal Stainless Steel Peg Set of 6 hooks ISI marked medium weight complete all as specified and directed. |
| 40 | S&F in renewal grating 100/125 mm dia of PTMT, fixed to Nahani trap complete all as specified and directed. |
| 41 | S&F in renewal wash hand basin vitreous china (flat back) of size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends complete all as specified and directed. |
| 42 | S&F in renewal 32 mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly -nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 43 | S&F in renewal 15mm bore Brass CP mixer for basin long neck mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 44 | S&F in renewal 15 mm bore, cast copper alloy chromium plated fancy type wall mixer tap with telephonic shower (3-in-1 system) for cold & hot water wall mixer having inclusive connection for shower complete all as specified and directed. |
| 45 | S&F in repair W.C vitreous china (pedestal patern) white (excluding flushing cistern and flush pipes) including seat cover fixing bolt & P - or S trap,flush pipe complete all as specified and directed. |
| 46 | S&F in renewal PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed. |
| 47 | S&F in renewal Mirror of selected quality glass mounted on 6 mm thick commercial plywood water proof fixed on wall with stainless steel brackets/clips and brass chromium plated screws complete all as specified and directed. |
| 48 | S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres hoisted and fixed in position complete all as specified and directed. |
| 49 | S&F in renewal Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe of 20mm bore of brass ferrule complete all as specified and directed |
| 50 | S&F, in renewal 20mm stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union fixed complete all as specified and directed. |
| 51 | S&F in renewal 25mm stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 52 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 53 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trenches/ floors, complete all as specified and directed. |
| 54 | S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trenches/ floors, complete all as specified and directed. |
| 55 | S&F PVC (SWR) bends any radius, 110mm bore, complete all as specified and directed. |
| 56 | S&F PVC (SWR) bends any radius, 75mm bore, complete all as specified and directed. |
| 57 | S&F PVC (SWR) junction single (single T), equal or unequal, 110mm bore, complete all as specified and directed. |
| 58 | S&F PVC (SWR) junction single (single T), equal or unequal, 75mm bore, complete all as specified and directed. |
| 59 | S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 60 | S&F in renewal for PVC (SWR) gully trap of size 125/110mm, setting and jointing with solvent cement complete all as specified and directed. |
| 61 | S&F in renewal for PVC (SWR) 'P' or 'S' trap 110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 62 | S&F in renewal for PVC (SWR) floor trap/ Nahani trap 75mm, plain with greating including setting and jointing with solvent cement complete all as specified and directed. |
| 63 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) size n.exc 1.50 Sqm each complete all as specified and directed. |
| 64 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) size exc 1.50 Sqm but n exc 4 sqm each complete all as specified and directed. |
| 65 | Taking down shutters of any description size exc. 1 sqm and n. exc. 2 sqm each complete all as specified and directed. |
| 66 | S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in opening as per specification complete all as specified and directed. |
| 67 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 68 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 69 | S&f Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 70 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type/ laminated flush door shutter (single or double leaf) of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 71 | S&F Factory made single extruded WPC (Wood Polymer Composite) wire mesh solid WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, Door to be panelled with SS mosquito mesh and XTN aluminium Mesh for additional saftey complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 72 | S & F Box Type steel windows, Ventilator with side hung shutters (double shutters for glass and gauge ) joined together with and including grills using 12 mm square bars @ 10 mm c/c as per TD No CEBZ/TD/14/2011, Sheet no -1/7 to 7/7 Including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded and preparing new steel surfaces, exc. 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed. |
| 73 | S&F for 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square size not exceeding 0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed. |
| 74 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 75 | S&F for 200 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 76 | S&F for extruded aluminium alloy handles of size 150 mm, fabricated type, anodised complete all as specified and directed. |
| 77 | S&F for 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 fixed complete all as specified and directed. |
| 78 | S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed. |
| 79 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 80 | S&F for 18 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws ,solvent cement adehesive complete all as specified and directed. |
| 81 | S&F for continous (piano) hinges , mild steel, bright finished or electrogalvanised, width of flap 30mm (when open) complete all as specified and directed. |
| 82 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 83 | S&F Brass 2 Levers Cupboard locks grade 1, Size 50mm complete all as specified and directed. |
| 84 | S&F for 100 mm size aluminium handles, cast type, polished bright and fixed complete all as specified and directed. |
| 85 | Taking down of old roof treatment of any description including mud phushka, concrete padding, tiles, cement plaster from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc. 250 mtr and not exc 500 mtr from the roof etc complete all as specified and directed. |
| 86 | M&L for repair of all visible hairline cracks on concrete roof / screed more than 0.50 mm thick and not giving hollow sound, should be cut and widen in V shape with mechanical cutter in the size (10mm W x 6mm D). Fill cracks with PU sealant / Hybrid Sealant with suitable gun and smoothed with a putty knife or trowel. Allow sealant to cure a minimum (72 Hrs.) 3 days etc complete all as specified & directed. |
| 87 | M&L for cutting grooves in brick /concrete wall, 75mm wide and 65mm deep and shaping horizontal face of groove with CM 1:3 complete all as specified and as directed. |
| 88 | M&L for Providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges or water tank staging, coping etc finished even and smooth without using extra cement complete all as specified and directed. |
| 89 | M&L for applying Smartcare Damp proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof: water) and other coats to be applied undiluted. (ii) The undiluted 2nd & 3rd coatings needs to be reinforced with 40 GSM geotextile to be sandwiched between them. (iii) After that final 4th coating shall be applied. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete all as specified and as directed. Notes:-(a) The work shall be executed through authorised applicator of manufacturer only.(b) Authrised Applicator shall be approved by GE before starting of work.(c) All materials shall be procured directly form manufacturer.(d) The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of GE. |
| 90 | M&L the non shrink high mechanical strength properties epoxy based mortar @ 5kg/RM on all corner joints of wall to prevent the capillary formation from wall to roof area; by three component system comprising of base, hardener and quartz filler having ER Base and Hardener with Quartz filler etc complete all as specified & directed. |
| 91 | S&F in renewal for curtain rod of Stainless steel 23-25 mm dia pipe thickness not less than 0.8mm of pipe with fixing bracket, side nobes etc fixed on walls with screws with PVC rawl plugs etc complete all as specified and directed. |
| 92 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggrtegate) as in plinth protection/path and the like including finsihing even & fair complete all as specified and directed. |
| 93 | Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed. |
| 94 | Dismantling of Asbestos cement ( corrugated, semi sorrugated etc) sheets in roof covering complete all as specified and directed. |
| 95 | M&L 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection, PCC will be laid with 12mm gap & the gap will be filled up with bituminous joint filler type A complete all as specified and as directed. |
| 96 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed. |
| 97 | Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5m in depth but not exceeding 3.0 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed. |
| 98 | Removing excavated material n exc. 50m and depositing where directed at alevel n exc 1.5m above the starting point complete all as specified and directed. |
| 99 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick each layer in loose/soft soil complete all as specified and directed. |
| 100 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed. |
| 101 | M&L Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and directed. |
| 102 | M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams , plinth beams , base for coloumns and mass concrete etc. complete all as specified and directed. |
| 103 | M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in coloumns , pillars , piers , posts and struts etc. complete all as specified and directed. |
| 104 | Use & waste of necessary formwork to sides of concrete, in foundations, footings,base of columns & plinth beams, etc in flat for rough finshed surfaces of concrete complete all as specified and directed. |
| 105 | Use & waste of necessary form work to Columns, square/ rectangular, rough finish surfaces of concrete complete all as specified and directed. |
| 106 | M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 107 | M&L for mild steel TMT bars 5 mm and over upto and including 10 mm dia , as in stirrups , spacers , and binders , cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 108 | Refixing in other opening Chowkhats or frames of size exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frame) complete all as specified and directed. |
| 109 | M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement and complete all as specified and directed.(Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as \\"supply only\\") |
| 110 | Supply only liquid water proofing compound (ISI Mark) complete all as specified and directed. |
| 111 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 112 | Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emusion white or tinted over a two coats of wall care putty on walls complete all as specified and dircted. |
| 113 | Providing and applying 1 mm thick wall care putty over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 114 | S&F Pre- painted galvalume aluminum zinc coating GI based profiled steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 115 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 116 | Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 117 | Taking down old U/S wooden /steel chowkhat with shutter size exc 1.50 sqm and n.exc 4.00 sqm each and removing from site complete all as specified and directed. |
| 118 | S&F for Anodised aluminium frame (Powder coating with minimun thickness of 50 microns)for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 119 | S&F for anodised aluminium door shutters(with powder coating of minimum thickness of 50 microns) aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 120 | S&F Stainless steel of AISI-304 grade barrel tower bolt 200 mm long, extruded section complete all as specified and directed. |
| 121 | S&F 4.8 mm thick tinted glass of selected quality in square size exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed. |
| 122 | M&L 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed. |
| 123 | S&F for aluminium door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 124 | Supply & fixing false ceiling at (a) all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles(with fully perforated12 mm thick micro tegulare edged or 10mm thick square edge GRG false ceiling) of perforated Size 595 x 595 mm of approved texture ,design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications and directions. |
| 125 | M&L for broken stone hard-core of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick each layer watered and rammed to a true surface complete all as specified and directed. |
| 126 | M&L for 100mm Cement concrete type D- 2, 1:4:8 (using 40mm graded stone aggregate) complete all as specified and directed. |
| 127 | Providing and laying 60mm thick laquer finish (ISI Marked) factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 128 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 129 | M&L cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in surfaces channels and drains complete all as specified and directed. |
| 130 | M&L Granite slab 16-18mm thick machine cut, bedded and joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps includigng rounding off the exposed edges comlete all as specified and directed.. |
| 131 | M & L 25mm thick precast cement concrete louvres and jallies (measured solid) of PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) set in CM 1:6, including all mouldings but excluding frame complete all as specified and directed. |
| 132 | M&L precast cement concrete 1:3:6 Type C1 (using 20mm graded stone aggregate) set in cement mortar(1:4) window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, Watherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed. |
| 133 | Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. |
| 134 | Preparing of old painted Chequred Tiles concrete / plaster surface of any description and in any postion over 10 cm width of girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. |
| 135 | S&F vitreous china urinals, bowl type flat back, as ordered , minimum size of 465 x 355 x 265 mm, white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 136 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 137 | Taking down ceiling fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including renewal of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed. |
| 138 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 139 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed. |
| 140 | Taking down unserviceable TPN DB with MCB's of any make/capacity, complete, all as specified and directed. |
| 141 | M&L for concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete all as specified nd directed for the following:- |
| 142 | One light point controlled by one switch. |
| 143 | One Ceiling fan point controlled by one switch. |
| 144 | One Exhaust fan point controlled by one switch. |
| 145 | One Bell/Buzzer point controlled by one way 5 Amp push button switch. |
| 146 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 147 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 148 | Description all as per item No 141 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. |
| 149 | S&F Modular switch 1 way 6A,1 module with marked L/T/F complete all as specified and directed. |
| 150 | S&F Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed. |
| 151 | S&F Modular switch 1 way 16A,1 module 15 Amp complete all as specified and directed. |
| 152 | S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 153 | S&F Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed. |
| 154 | S&F modular bell push flush type, 5 Amps complete all as specified and directed. |
| 155 | S&F of electric bell , AC, 230 Volts, single pole complete all as specified and directed. |
| 156 | S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 157 | S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete all as specified and directed. Please Enable Macros to View BoQ information |
| 158 | S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender