Tender For Comprehensive Repairs To The Messes/Billets, Ceratin Hq Bldg And Hangers Including Periodical Services At Main C Area At Afs Tambaram (8923/E8)
Tender Value
20 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
18 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repairs To The Messes/Billets, Ceratin Hq Bldg And Hangers Including Periodical Services At Main C Area At Afs Tambaram (8923/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Aluminium/UPVC chowkats/Frames of area n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and directed by Engineer-in-Charge. |
| 2 | All as per item No.01 above but area exc 1.5 Sqm & not exc 4 Sqm complete all as specified and directed by Engineer-in-Charge. |
| 3 | S & F powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing, etc complete all as specified and directed by Engineer-in-Charge. |
| 4 | S & F powder coated (minimum thickness of powder coating 50 micron) aluminium anodised door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, etc complete all as specified and directed by Engineer-in-Charge. |
| 5 | S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised window and ventilator shutters, fixed /sliding/side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,three track etc complete all as specified and directed by Engineer-in-Charge. |
| 6 | S&F aluminium powder coated grills (pattern DG-104) weight of 2.00 to 3.20 Kg/Sqm for windows, ventilators, etc including jointing, cleats etc and fixed with medium screws into walls / frame work etc complete all as specified and directed by Engineer-in-Charge. |
| 7 | S&F 5.5 mm thick sheet glass, ordinary quality, and sheet glass is ground or obscured or frosted on one side fixed in aluminium door/partition glazing with rubber beading complete all as specified and directed by Engineer-in-Charge. |
| 8 | S&F 4.8 mm thick sheet glass, ordinary quality, and sheet glass fixed in aluminium window/ventilator glazing with rubber beading complete all as specified and directed by Engineer-in-Charge. |
| 9 | M & L for 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work/alluminum work like partition or door etc complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F for brass 2-lever Mortice lock,vertical type, size 100 mm complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F in repairs brass 2-lever Mortice lock,vertical type, size 100 mm complete all as specified and directed by Engineer-in-Charge. |
| 12 | S&F for door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80kG complete all as specified and directed by Engineer-in-Charge. |
| 13 | S&F in repairs door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80kG complete all as specified and directed by Engineer-in-Charge. |
| 14 | S&F in repairs 140 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F in repairs of MS curtain rod 25mm decorated type, powder coated fixed complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F in repairs mild steel brackets for curtain rod 25mm dia , decorative type powder coated complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F in repairs, stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with wooden beading, and tinned tack or galvanised wire staples or necessary nut & bolt etc., complete all as specified and directed by Engineer-in-Charge. |
| 18 | Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pin/springs clips and providing and fixing new ones, complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F sheet glass 4mm thick ordinary quality & glazing with oil putty in square n.exc 0.5 Sqm in each pane at any height and any story complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F sheet glass 4mm thick frosted quality & glazing with oil putty in square exc 0.5 Sqm in each pane at any height and any story complete all as specified and directed by Engineer-in-Charge. |
| 21 | S & F for factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area not exc 2.0 Sqm complete all as specified and directed by Engineer-in-Charge. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 22 | Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F for Solid/hollow PVC Wall Lining consisting of 5mm thick Plain colour / wood grain printed PVC sheet inclusive of solvent cement and fixing at site on 18mm minimum thick PVC/WPC frame as per specifications and drawing including dismantling existing boards of any description any pattern including fillets, frame etc complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed by Engineer-in-Charge. |
| 25 | M & L Post constructional anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engineer-in-Charge. |
| 26 | Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 27 | Demolition of cement concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 28 | M&L for 25mm thick cement concrete (1:2:4) type B0 (12.5mm graded stone aggregate) as in sub-base complete all as specified and directed by Engineer-in-Charge. |
| 29 | Roughing surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., laid over and including cement screed bed or bedding layer in CM (1:6), 15mm thick and tiles jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, complete all as specified and directed by Engineer-in-Charge. |
| 31 | M & L glazed ceramic coloured tiles of size 300x450x7 mm / 350x 250x 7mm/ 450X 350X 7mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L Vitrified Ceramic tiles, light shade, 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc., and laid over and including cement screed bed or bedding layout in CM (1:6), 15mm thick and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete all as specified and directed by Engineer-in-Charge. |
| 33 | M&L Vitrified Ceramic tiles 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in skirting / dados etc and including 10mm thick rendering in CM(1:4) baking coat and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete all as specified and directed by Engineer-in-Charge. |
| 34 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base and finishing surface of concrete even and rough to receive the topping layer complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L for Machine cut kota stone slab flooring 20 -25mm thick over cement screed base laid and cement screed in CM 1:6, 15mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for Machine cut kota stone slab 20 -25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. |
| 38 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, floor/wall cladding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing stone slabs laid, bedded and pointed including 20mm thick screed cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 39 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-Charge. |
| 40 | M&L sand filling under paver blocks including watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 41 | M & L for 60mm thick machine pressed precast cement concrete tiles of interlocking pattern with grey cement and pigment rubber moulded with vibration technology set and jointed as per manufactures instructions laying over sand cushioning complete all as specified and directed by Engineer-in-Charge. Note : (i) Rate quoted by contractor shall deemed to inclusive of filleting the side of pavement with PCC (1:2:4) type B1.(ii) Sand cushion will be measured & paid separetely. |
| 42 | M&L for chequered cement concrete tiles 300x300x25 mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed layer in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 43 | M&L for providing cement concrete 1:2:4, type B1 (using 20 mm graded aggregate) as in cills, steps, bands, copings, bed plates , etc including necessary form work, complete all as specified and directed by Engineer-in-Charge. |
| 44 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed by Engineer-in-Charge. |
| 45 | M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 46 | M&L for Brick work with sub class old half brick size straight or curved on plan exc 6 m mean radius in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 47 | Taking down cement or cement limes plaster on brick or stonewalls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 48 | M & L for rendering 15mm thick in cement mortor 1:4 on Brick wall surfaces, finished even and smooth without using extra cement with @ at 3% IWPC (IWPC measured separately) complete all as specified and directed by Engineer-in-Charge. |
| 49 | M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 50 | M&L 5 mm thick plastering in CM 1:3 finished even and smooth without using extra cement on brick surface of ceilings complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting primer paint on plastered surrface complete all as specified and directed by Engineer-in-Charge. |
| 52 | M & L preparation of new surfaces of walls plastered or unplastered etc and applying two coat of cement based paint over a coat of alkali resistant primer on wall surfaces complete all as specified and directed by Engineer-in-Charge. |
| 53 | M & L preparation of new surfaces of walls plastered or unplastered and applying three coat of white wash on ceiling to obtain uniform surfaces including making good the surface complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 55 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth ,upto entire satisfaction of Engineer-in-charge and after preparing the surface smooth applying one coat of white wash with using paint brush complete all as specified and directed by Engineer-in-Charge. |
| 56 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth, upto upto entire satisfaction of Engineer-in-charge and after preparing the surface smooth applying one coat of white wash with paint brush complete all as specified and directed by Engineer-in-Charge. |
| 57 | Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth ,upto entire satisfaction of Engr-in-charge, and after preparing the surface smooth applying one coat of oil bound distemper (washable) by using paint roller or roller brush, as per existing or as approved tint/colour complete all as specified and directed by Engineer-in-Charge. (i) The prepared surface after wall putty, the contractor will inform to the GE as well as Engineer-in-Charge for site inspection before applying further finishes. Please note that further finishes work will start only after approval of the prepared surface from the GE as well as Engineer In Charge. |
| 58 | Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, washing down with water including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth, upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of cement base paint with paint brush or roller brush, as per existing or as approved tint/colour complete all as specified and directed by Engineer-in-Charge. (i) The prepared surface after wall putty, the contractor will inform to the GE as well as Engineer-in-Charge for site inspection before applying further finishes. Please note that further finishes work will start only after approval of the prepared surface from the GE as well as Engineer In Charge. |
| 59 | Material and labour for preparation of old surfaces (plastered/unplastered) of walls/pillars /cornices by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc including applying white cement based putty where required for filling to depressions to make the surface even and smooth after preparing the surfaces applying one coat of weather proof exterior emulsion paint (wheather coat Apex, 100% exterior grade), as per existing or as approved tint/colour complete all as specified and directed by Engineer-in-Charge. Note : The prepared surface after wall putty, the contractor will inform to the GE as well as Engineer-in-Charge for site inspection before applying further finishes. Please note that further finishes work will start only after approval of the prepared surface from the GE as well as Engineer In Charge. |
| 60 | M&L preparation of old painted surface of wood and wood based materials of any description not otherwise described over 10 cm. width or girth shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel painting complete all as specified and directed by Engineer-in-Charge. |
| 61 | M&L preparation of old painted surface of Steel and iron work of any description not otherwise described over 10 cm. width or girth shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F 500 Ltr capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position including dismantling existing tank complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F 1000 Ltr capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position including dismantling existing tank complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F 2000 Ltr capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position including dismantling existing tank complete all as specified and directed by Engineer-in-Charge. |
| 65 | Taking down of steel tubing and connections complete on walls floors etc for 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge. |
| 66 | All as per item No. 65 above but bore of pipe in 20mm dia complete all as specified and directed by Engineer-in-Charge. |
| 67 | All as per item No.65 above but bore of pipe in 25mm dia complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F Galvanised iron medium graded tubes with all fittings and fixed complete on walls ceiling or laid in floors etc,15mm in dia complete all as specified and directed by Engineer-in-Charge. |
| 69 | All as per item No. 68 above but bore of pipe 20 mm complete all as specified and directed by Engineer-in-Charge. |
| 70 | All as per item No. 68 above but bore of pipe 25 mm complete all as specified and directed by Engineer-in-Charge. |
| 71 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches/ceilings complete all as specified and directed by Engineer-in-Charge. |
| 72 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches/ceilings complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches/ceilings complete all as specified and directed by Engineer-in-Charge. |
| 74 | S&F in repair 20mm bore Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed by Engineer-in-Charge. |
| 75 | S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge. |
| 76 | S & F in repairs 15 mm dia Pillar taps long body fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 77 | S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 78 | S&F in repairs 15 mm dia Bib tap standard PTMT long body any colour screwed for iron pipe (Min weight 120 gms) complete all as specified and directed by Engineer-in-Charge. |
| 79 | S&F in repairs 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed by Engineer-in-Charge. |
| 80 | S&F in repairs 15mm dia angle Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed by Engineer-in-Charge. |
| 81 | S&F in repair Cover/ lid for PVC water tank of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 82 | S&F in repair 600mmx450mm belvelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with pvc / alluminium frame and fixed to wooden plugs with chromum plated brass screws cup washers complete all as specified and directed by Engineer-in-Charge. |
| 83 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe complete with plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern incl pedestal pan and connection to drain (or outgoing pipe) complete all as specified and directed by Engineer-in-Charge. |
| 84 | S & F in repairs, vitreous china Squatting pan Orissa pattern of size 580mx440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and directed by Engineer-in-Charge. |
| 85 | S&F in repair vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP pillar tap, 01 Nos 32mm waste coupling and flush pipe of polyethylene of low or high density or 32mm dia PVC pipe, one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engineer-in-Charge. |
| 86 | S & F in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but exncluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F in repairs vitreous china urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed by Engineer-in-Charge. |
| 88 | S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 89 | Disconnecting existing tanks of capacity exc 250 ltr & n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed by Engineer-in-Charge. |
| 90 | Disconnecting existing tanks of capacity exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed by Engineer-in-Charge. |
| 91 | S & F in repairs PVC connections 15mm dia 600mm long (for cold/hot water connection with brass or PTMT flynuts and washer at both ends complete all as specified and directed by Engineer-in-Charge. |
| 92 | S&F in repair PVC ball valve 25 mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed (minimum weight 25 mm- 455 gms ) complete all as specified and directed by Engineer-in-Charge. |
| 93 | S & F PVC( SWR ) pipes 110mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed by Engineer-in-Charge. |
| 94 | S & F PVC( SWR ) pipes 75mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed by Engineer-in-Charge. |
| 95 | S&F PVC (SWR) bends any radius 110mm bore in repairs complete all as specified and directed by Engineer-in-Charge. |
| 96 | S&F PVC (SWR) bends any radious 75 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 97 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge. |
| 98 | M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to including joining welding and connecting each other to form a cage for water tanksFe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge. |
| 99 | M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 100 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 101 | Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 102 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per manufacturer instruction complete all as specified and directed by Engineer-in-Charge. |
| 103 | S & F factory made solid PVC Panel Door shutter 30mm thick (style) consisting of Frame made out of M.S Tube for top & Bottom rails. MS Frame shall be covered with heat moulded, Plain colour PVC ’C’ channel having a PVC Sheets strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet to be fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading, and joined together with solvent cement as per manufacture instruction complete all as specified and directed by Engineer-in-Charge. |
| 104 | S & F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed by Engineer-in-Charge. |
| 105 | S & F 125 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge. |
| 106 | S & F 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge. |
| 107 | S & F in repairs 300 mm length Aluminium alloy anodised sliding door bolt with hasp, staples (bolt types) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge. |
| 108 | Material & Labour for providing and fixing stainless steel (Grade 304) railing, grill, gate etc made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor other side of waist slab with suitable arrangement complete all as specified and directed by Engineer-in-Charge. |
| 109 | S & F factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm, etc complete all as specified and directed by Engineer-in-Charge. |
| 110 | S & F MS Butt hinges medium weight cold rolled of size 100mm complete all as specified and directed by Engineer-in-Charge. |
| 111 | M & L preparation of new surfaces of wood based material any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 112 | S & F for 300 mm length Aluminium alloy anodised sliding door bolt with hasp, staples (bolt types) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender