Tender For Provision Of Bulk Store With Rifle Racks And Associated Works Services For Armoury, Locker For Rifles And Ammunitions At 3 Brd Af Under Ge (Af) Mc Chandigarh
Tender Value
48.05 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
12 days left
EMD
96100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Bulk Store With Rifle Racks And Associated Works Services For Armoury, Locker For Rifles And Ammunitions At 3 Brd Af Under Ge (Af) Mc Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm and averaging 15 cm deep and getting out in Soft/Loose soil complete all as specified and directed. |
| 2 | Excavation in trenches n. exc 1.5 metre wide & n. exc 1.5 metre depth; for foundations, and laying of GI pipe, cable etc. n. exc. 10 sqm on plan and getting out in soft/loose soil, complete all as specified and directed. |
| 3 | M&L for plain cement concrete (1:4:8) type D-2 using 40m graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed by Engr-in-charge |
| 4 | Returning, Filling in, including Spreading, Levelling, Watering and well Ramming in Layers not Exc 25 Cm in Soft / Loose Soil complete all as specified. |
| 5 | Removing excavated material soils, exc 250m but n exc 500m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed. |
| 6 | M&L RCC-M-25 (design Mix) Using 20mm graded crushed stone aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 7 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batten complete all as specified and directed. |
| 8 | M&L RCC- M-25(design Mix) Using 20mm graded crushed stone aggregate for Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 9 | M&L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 10 | M&L RCC- M-25(design Mix) Using 20mm graded crushed stone aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 11 | M&L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 12 | M&L RCC- M-25(design Mix) Using 20mm graded crushed stone aggregate for Chajja complete all as specified and directed. |
| 13 | M&L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 14 | M&L RCC- M-25 (design Mix) Using 20mm graded crushed stone aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like n exc 200m thick complete all as specified and directed. |
| 15 | M&L for Form Work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 16 | M&L RCC- M-25(design Mix) Using 20mm graded crushed stone aggregate for Pardi Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and directed. |
| 17 | M&L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Pardi fins, louvers, fascia complete all as specified and directed. |
| 18 | S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 19 | All as per item no. 18 here-in- before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 20 | M&L Brickwork With Fly Ash Bricks, Straight Or Curved On Plan Exc 6m Mean Radius, Built in Cement Mortar (1:6) complete all as specified and directed. |
| 21 | M&L Brickwork With Flyash Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Thick Walls, Built in Cement Mortar (1:4) complete all as specified and directed. |
| 22 | M&L 10 mm thick 1:6 cement mortar Internal Plaster on Fair Faces of Walls Finished Even And Smooth (without using extra cement) all as specified & as directed by Engineer-in-Charge. |
| 23 | M&L 5 mm thick on fair faces of brick or concrete surfaces within 1:3 cement mortar on Ceiling. Finished Even And Smooth (without using extra cement) all as specified & as directed by Engineer-in-Charge. |
| 24 | M&L 15 mm thick external plaster on Fair Faces Of Walls in cement mortar 1:4 finished fair & even (without using extra cement) complete all as specified and as directed by the Engineer-in-Charge. |
| 25 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 26 | M&L for applying Marble/stone texture paint of 5mm thick to creates an authentic 3D designer stone and granite luxury finish as approved by GE over a coat of exterior wall primer which includes comprehensive surface preparation by removing dust and mortar droppings, followed by a specialized primer coat to ensure maximum adhesion. The application shall consist of multiple layers of decorative paste applied with a stainless steel trowel to create authentic marble-like veining and depth, followed by mechanical buffing and burnishing to achieve a high-gloss, smooth finish. The rate shall be inclusive of all materials, labor, specialized tools, scaffolding, and a final protective wax coating to ensure a water-resistant and durable decorative surface, all executed as per the manufacturer’s specifications and the architect's approved sample with complete all as specified and directed. Make for texture paint - Asian paint apex duracast crosstex (horizontal scratch/vertical scratch/criss cross/rainfall), or equivalent in Berger or Nerolac. Make for primer : Asian paint Smartcare Primero or equivalent in Berger or Nerolac. Make for exterior emulsion paint : Asian Paints Apex Weatherproof Emulsion or equivalent in Berger or Nerolac. |
| 27 | M&L for preparing new surfaces of walls, distempering 2 coats with oil emulsion distemper white or tinted with one priming coat over one coat of 2mm wall care putty complete all as specified and as directed by the Engineer-in-Charge |
| 28 | All as per item No 27 here-in-before but on ceiling surfaces. |
| 29 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 30 | M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | M&L for 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded crushed stone aggregate) complete all as specified and as directed by the Engineer-in-Charge. |
| 32 | M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) complete all as specified and as directed by the Engineer-in-Charge |
| 33 | M&L for double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm over set and jointed in neat cement slurry and pointed in white or coloured cement to match and Grouting joints with epoxy or matching color-pigmented grout. All joints must be uniform (suggested 2mm spacer) complete all as specified and as directed complete all as specified and as directed by the Engineer-in-Charge. Make : Orient ceramic/ H&R Johnson/ Kajaria. Note: Tile Should be lay with the help of tile vibrater and spacers. |
| 34 | M&L for Screed Bed or Bedding Layer in cement mortar (1:6) 15mm Thick For Laying Floor Finishes complete all as specified and as directed by the Engineer-in-Charge |
| 35 | M&L for Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match complete all as specified and as directed by the Engineer-in-Charge Note: Tile Should be lay with the help of tile vibrater and spacers. |
| 36 | M&L for super gloss finished/carving (GVT) tiles external/Internal in vertical surfaces 600mm x 1200mmx 7 to 8mm thick over & including 10mm thick rendering in cement mortar 1:3 set and jointed in neat cement slurry or tile adhesive and pointed in white or coloured cement to match and Framing of a C.P. Brass, Stainless Steel perimeter \\"T\\" or \\"L\\" profile frame to act as a border complete all as specified and as directed.Make : Orient ceramic/H&R Johnson/Kajaria.Note : Tile Should be lay with the help of tile vibrater and spacers. |
| 37 | M&L 50mm thick Plinth Protection PCC C1 (1:3:6) using 20mm graded crushed stone aggregate (0.75m wide) complete all as specified and as directed. |
| 38 | S & F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. conforming to IS-733 complete all as specified and as directed. |
| 39 | S & F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 40 | M&L 9 mm thick both sides prelaminated Particle board, exterior grade, fixed with screws to aluminium frame work in partition complete all as specified and as directed. |
| 41 | S & F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 42 | S&F Door closer hydraulically regulated, designation No 3, aluminium (die cast) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed. |
| 43 | S&F brass 6 levers Mortice lock, vertical type, size 100 mm complete all as specified and as directed. |
| 44 | S & F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed. |
| 45 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 46 | M&L for providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose) (Area of window upto 1.75 sqm) |
| 47 | S & F 6 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 48 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: (i)For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (ii) Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.(iii) Glass shall be paid separately. |
| 49 | S & F 6 mmFigured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 50 | M&L Factory made single extruded WPC (wood polymer composite) solid decorative door/ window/ ceosetory windows & other frames/ chowkhat of size 45x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice huck/ wheat huck ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 51 | M&L factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note : Stainless steel butt hinges shall be paid separately) |
| 52 | S&F SS handles, oval type, 125 mm size fixed complete all as specified and directed. |
| 53 | S&Fin 300 mm SS sliding door bolts, plate type, with bright, bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed. |
| 54 | S&F 200 mm long SS barrel tower bolts and fixed, complete all as specified and directed. |
| 55 | S&F 150 mm type-D, SS handles, complete all as specified and directed. |
| 56 | S & F Butt hinges 100 mm size, SS hinge, type C-21 complete all as specified and directed. |
| 57 | S&F 300 mm Stainless steel ordinary rat tail rod pattern springs, including roller & roller plate complete all as specified and directed. |
| 58 | S&F in SS Floor door stopper with hard drawn steel spring 150mm size fixed in floor complete all as specified and directed. |
| 59 | S&F in SS Cylindrical knob lock with computerized brass keys complete all as specified and directed. |
| 60 | S&F PVC Floor trap 75 mm ISI marked complete all as specified and directed. |
| 61 | S&F 75 mm PVC (SWR) pipes single socket in any length with rubber ring joints, laid in trenches, wall, floors having pressing rating 6 kg/cm2 etc complete all as specified and directed. |
| 62 | S&F 75 mm PVC bends,branch piece or similar fitting as reqd to make the system functional complete all as specified and directed. |
| 63 | S&F110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed on wall having pressing rating 6 kg/cm2, complete all as specified and as directed. |
| 64 | S&F 110mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 65 | S&F for brass chromium plated 40mm bottle traps with wall flange for wash basins/urinal pot with inlet and outlet screwed for pipe or connections including necessary packing, union ,cap, and reducer and fixed complete all as specified and directed.Make : Cera/Hindware/Parryware. |
| 66 | S&F in Vitreous China table top wash basin,white or ivory colour flatback,size 530mmx420mmx140mm/600x390x 150mm/ 600x380x130mm excluding taps, waste chain and plug and porcelain stopper but including Coupling as per Model complete all as specified and directed. Make : Jaquar (Cat part No. JDS-WHM-25907N), Parryware(Cat part No. WPC898Z46), Cera(cat part No.S2020172). |
| 67 | S&F for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specified and directed. Make : Cera (Cat No. : F8040204), Parryware (Cat No:WPT9926A1), Hindware(Cart part:F570043CP) |
| 68 | S&F in for Chromium plated bib cock with wall flange, Screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and directed.Make : Hindware (cat No:F690004CP), Parryware(cat No-WPT5004A1), Cera(cat No.F2014151) |
| 69 | S&F in for pillar cock, with extension body, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified and directed.Make : Jaquar (cat part No.VGP-CHR-81021N), Cera (cat part No.F1023102), Parryware(cat part No WPT2301A1) |
| 70 | S&F high-efficiency spreader, typically finished in heavy-duty chrome-plated brass or SS 304 fixing with 15mm dia pipe of concealed flushing system (min weight 100 gms) fixed complete all as specified and directed. Make : Hindware/ Jaquar/ Parryware. |
| 71 | S&F for 5.50mm thick 800 x 750mm mirror of selected quality glass with eadge moulding, mounted on wall fixed with SS stud fixed complete all as specified and directed. |
| 72 | S&F for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, fixed complete all as specified and directed by Engineer in Charge. |
| 73 | S&F for PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, fixed complete all as specified and directed. |
| 74 | S&F for Pop up coupling of PTMT (half or full threaded) 32 mm to 45 mm bore fixed complete all as specified and directed. Make : Hindware/Jaquar/Parryware |
| 75 | S&F 15mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed. Make : Jindal/TATA/Surya parkash. |
| 76 | S&F for 20mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed. Make : Jindal/TATA/Surya parkash. |
| 77 | S&F flexible health faucet with clamp all as necessary fitting etc complete all as specified and directed. Make : Jaquar/Parry ware/Hindware |
| 78 | S&F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 79 | S&F for CP Toilet paper holder including all fitting and fixture complete all as specified and directed.Make : Jaquar/Parryware/Hindware |
| 80 | S&F for 10mm thick toughnend frosted glass use as modular glass urinal partitions in chamfer shapes or as per required shape of each patitions including all fixing arrangement ie.stainless steel clamp/stud for hanging glass area exc 0.75 Sqm n exc 1.00 Sqm complete all as specified and directed. |
| 81 | S&F for Rotational moulded polyethylene water storage tanks 1000 litres capacity three layered white in colour ( clylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water tank complete all as specified and directed. Make : Sintex, Poly plast, Supreme. |
| 82 | S&F for Ball Valve 20 mm Dia For Water Tank complete all as specified and directed. |
| 83 | S&F for PVC, SWR Pipe 150 Mm Rain water pipe conforming to IS complete all as specified and directed. |
| 84 | Site clearance in soft and lose soil complete all as specified and directed. |
| 85 | M&L PCC type B1, 1:2:4, using 20mm graded crushed stone aggregate as in stagging for water tanks, inserting hold fast and filling Jamb etc and like including weathering slighly rounded or chamfered and where connecting slab and parapets etc angles throating complete all as specified and directed. |
| 86 | M&L for Cement concrete 1:2:4 Type B0 using 12.5 mm crushed stone aggregate as Damp proof course of 40 mm to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 87 | M&L for cleaning the surface before final treatment on roof as specified, applying the double layer of glass fibre mesh of 60 GSM over the roof using poly plastic fibre adhesive mix/ Eazeecoat Ultra mix in the following manner :-(a) Making poly plastic fibre adhesive/ Eazeecoat Ultra mix by adding polyplastic fibre/ Eazeecoat Ultra and white cement in equal portion and add 25% water in it to make the mixture per manufacturer instructions. (b) The double layer of fibre mesh to be spread on the roof & apply two coat of above mixture of poly plastic fibre/ Eazeecoat Ultra adhesive with a roller & brush to cover the fibre mesh throughouly. (c) Process of roof lamination :- Lamination/top coat on the roof using poly plastic fibre coat/ Eazeecoat Ultra with white cement & water as per manufacturer instructions. Top coat is ammonia free, w/o any harmful effects, & is flexible in nature. (d) Min thickness of the treatment shall be 2mm.Make : Nerolac Perma/ European Paints & Chemicals/ Ever Paint. |
| 88 | M&L for 12mm thick glass reinforced gypsum (GRG) ceiling (size of tiles 595 x 595mm) of approved design fixed with powder coated (powder coating on web bottom only) GI grid consisting of main Tee with grooves section of size (15mm x 30mm), cross Tee with grooves section of size (15mm x 23mm) and powder coated GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x 595mm with 4mm dia GI wire suspender including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrangement with grid size 60x120cm including taking down upto height 15 Metre complete all as specified and directed. Make : Diamond Brand TM/ Armstrong/ Everest/ Dexune. |
| 89 | M&L for Treating soil along the external wall below concrete or masonry apron using chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed. |
| 90 | M&L for Treatment of soil under existing floors using chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed. |
| 91 | M&L for Treating the soil under plinth protection at the rate of 5 litres of chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) per square metre of surface area, complete all as specified and directed. |
| 92 | M&L for Treating at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed. |
| 93 | M&L for 100mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge. |
| 94 | M&L for Rubber moulded 80mm thick machine pressed coloured glossy finish (Red/Yellow) precast concrete interlocking paver blocks with grey cement and pigment any shape and size conforming to IS 15658-2006 M-40 grade including 25mm thick sand cushion complete all as specified and directed by Engr-in-Charge. Sandeep Bros/ NTC/ ULTRA Please Enable Macros to View BoQ information |
| 95 | M&L for Rubber moulded 80mm thick machine pressed coloured glossy finish (Red/Yellow) precast concrete interlocking paver blocks with grey cement and pigment any shape and size conforming to IS 15658-2006 M-40 grade including 25mm thick sand cushion complete all as specified and directed by Engr-in-Charge. Sandeep Bros/ NTC/ ULTRA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender