Tender For maintenance of Works Pertaining To Closed/Completed Schemes Dwarka.Sub Head : Repair & Maintenance Of Existing Rain Water Harvesting Pits Including Installation Of Piezometer Under Jurisdiction Of Sub-Division-Iv/Dpd-4.Estimated Cost : 28,
Tender Value
28.46 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
5 days left
EMD
56931
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Works Pertaining To Closed/Completed Schemes Dwarka.Sub Head : Repair & Maintenance Of Existing Rain Water Harvesting Pits Including Installation Of Piezometer Under Jurisdiction Of Sub-Division-Iv/Dpd-4.Estimated Cost : 28,46,573/-
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.(a) All kinds of soil |
| 2 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.(a) All types of soil(i) 300 mm dia |
| 3 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.(a) Rocky strata including Boulders(i) 300 mm dia |
| 4 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. (a) 150 mm nominal size dia |
| 5 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.(a) 150 mm nominal size dia |
| 6 | Supplying, filling, spreading & leveling of pea sized gravel , in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 7 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 8 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin- charge. |
| 9 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 10 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 11 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:(a) 100 mm dia |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:(a) 1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) ) |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:(a) Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 14 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete:(a) 200 mm diameter |
| 15 | Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. |
| 16 | 12 mm cement plaster of mix:(a) 1:4 (1 cement: 4 fine sand) |
| 17 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 18 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required,complete as per direction of Engineer-in-charge.(a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, complete as per direction of Engineer-in-charge.(a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 20 | Supply and installation of piezometer with cable and digital Water Level Recorder(DWLR) of approved make along with telemetry facility including configuring of the data logger and making data available on the web & getting it approved from concerned agency etc including following specificationsCable Length: 50 Meter Cable• Digital Water level Recorder• Imported Pressure transducer (Sensor) with Capability of Measuring till 160 meters ‘depth• Factory-Calibrated sensor.• Facility for Wall/Pipe Mounting• Durable and Rugged Design• Data Storage 8GB• Accuracy: 0.25% F.S• Operating Temperature: -10°C to +60°C• Current consumption: 5mA• Enclosure: IP65 ABS• Data Output: Microsoft Excel format• Clock: Real-time internal Clock• Input power: 220V 50Hz AC• Battery: 10 AhAdditional Features :• One Year Cloud server.• One year Machine to machine data service.• One-year free data access through cloud server• IOT SIM• 1 Year warranty |
| 21 | Amount after applying 0.973 Multiplying Factor due to decrease in GST Rate i.e. on Rs. 28,29,198.00 |
| 22 | Less Cost Index @-0.09% i.e. on Rs.(-)2,564.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender