Tender For Tender For Repair And Restoration Of Interlinking Of 11Kv Shat Feeder And 11Kv Hathithan Feeder From Manikaran Chowk To Hathithan Chowk In (E) Section Parla Bhuntar Under Esd, Hpsebl, Bhuntar On Turnkey Basis Against Bid Specification No.
Tender Value
12.48 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
4 days left
EMD
12489
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For Repair And Restoration Of Interlinking Of 11Kv Shat Feeder And 11Kv Hathithan Feeder From Manikaran Chowk To Hathithan Chowk In (E) Section Parla Bhuntar Under Esd, Hpsebl, Bhuntar On Turnkey Basis Against Bid Specification No. Hpsebl/Ock/Nit-03/2026-27, Estimated Cost :- Rs. 12,48,927/- Only , Emd:- Rs. 12,489/-Only
BOQ
| Sl. No. | Item Description |
| 1 | supply Part:- |
| 2 | 11kV HT Line :- |
| 3 | Equipments and switchgear:- |
| 4 | Poles & Conductor/cable :- |
| 5 | Supply of 10.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-'A') as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-47 |
| 6 | Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any. |
| 7 | Supply of 11 KV HT XLPE Cable 3X120 mm2 |
| 8 | Supply of End Termination kit for 11 KV XLPE Cable (Alu., armourmed 3x120 mm sq )(OD) |
| 9 | Supply of steel rope of suitable size for holding of 11 KV XPLE Cable three core 120 sqmm along with fixing clamps and allied material etc. |
| 10 | Insulators:- |
| 11 | Supply of 11 kV Pin Insulator Brown Glazed Porcelain insulator alongwith GI Pin confirming to IS-731/1971 or latest version thereof with minimum and maximum creepage distance distance & duly fitted with lead/zinc thimble suitable for use with GI forged pin having small steel head as per IS:2486 (Part-I & II) of 1993 & latest amendment if any. Moderately polluted atmospheres Creepage distance- 320mm |
| 12 | Fittings and accessories :- |
| 13 | Stay Sets:- |
| 14 | Supply of Stay Set Suitable for 11KV made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. |
| 15 | Stay Wire:- |
| 16 | Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) |
| 17 | EARTHING:- |
| 18 | Supply of Earthing set suitable for HT line/Earthing of metering unit made of GI pipe 40 mm dia (internal dia) wall thickness 3.25 mm medium quality pipe of standard make conforming to IS: specifications 2500 mm long with GI Socket closed at top pipe shall have holes of 12 mm dia every 150 mm apart throughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at top end of the pipe along with bolts and nuts size 50x12 mm and washers for fixing the clamp on the pipe. The bottom end of the pipe shall be tapered cut at 45 degree. |
| 19 | Supply of MS Channel 100x50x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, clamps, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 13.10 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality: |
| 20 | 1270 mm long |
| 21 | 600 mm long |
| 22 | Supply of MS Angle Iron 50x50x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality: |
| 23 | 750 mm long for x-arm for single pole |
| 24 | Supply of Knee Bracing Set 65x65x6 mm |
| 25 | 1100 mm long |
| 26 | Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size |
| 27 | Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skull and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV |
| 28 | Supply of Galvanised steel barbed wire of 9.8 kg /100metre |
| 29 | Supply of Top Clamp (MS Flat 50x6mm) |
| 30 | Supply of Half Clamp (MS Flat 50x6mm) |
| 31 | Supply of Full Clamp (MS Flat 50x6mm) |
| 32 | Supply of Aluminium Paint for all poles and steel fitting |
| 33 | Supply of Red oxide for all poles and steel fitting |
| 34 | Erection Part:- |
| 35 | 11kV HT Line :- |
| 36 | Erection of steel tubular pole 9/10/11 Mtr. Long (Single pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole with RCC Muff,including cement concrete filling 1:3:6 (1 cement : 3 sand : 6 aggrigate 20 mm nominal size), Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Fixing of barbed wire danger plate , Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed) |
| 37 | Laying, stringing , sagging of 11 KV XLPE Cable 3x120 mm2 a/w steel rope & allied material . |
| 38 | Erection of Termination kit ( 11 KV XLPE Cable (Alu., armourmed 3x120 mm sq )(OD)) |
| 39 | Erection of Stay Set HT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting) |
| 40 | Erection of Earthing set for HT Line (Digging of pit, fixing of GI wire to the earth system & filling of pit) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender