Tender For Improvement Of Power Factor At Pragati Vihar Sps.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Jul 2026
7 days left
EMD
91700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Power Factor At Pragati Vihar Sps.
BOQ
| Sl. No. | Item Description |
| 1 | Improvement of Power Factor at Pragati Vihar SPS by carrying out following works:- Replacement of Capacitors in 4x225KW & 2x450 KW motors:- 06 Nos. Dismantling of defective components i.e. capacitors, fuses, post insulators, bus bars etc. from HT APFC panel including dismantling of terminations, mounting arrangements, hardware etc. as required at site. |
| 2 | S/o 130 KVAr capacitor bank for 225kW motor, rated at 3.3 kv, 3 phase 50 Hz complete with bus bar links post insulators and necessary hardware. Make: - Crompton/L&T/DJB approved make. |
| 3 | S/o 275 KVAr capacitor bank for 450kW motor, rated at 3.3 kv, 3 phase 50 Hz complete with bus bar links post insulators and necessary hardware with box. Make:-Crompton/ L&T/DJB approved make. |
| 4 | S/o 100 A, 3.3 KV HRC fuses with links and hardware. Make: - Copper Bussman/Anand |
| 5 | S/o 63 A, 3.3 KV HRC fuses with links and hardware. Make: - Copper Bussman/Anand |
| 6 | S/o 50 mm sq. 3 core aluminum armored cable 3.3/11 kV grade. Make:-Havells/Gloster/Grandlay. |
| 7 | Termination of 50 mm sq. cable using necessary clamps, hardware, joint kit, lugs etc. as required at site. |
| 8 | Servicing of panel including decarbonizing of contacts, capacitor terminations, tightening of all nut bolts, cleaning of various components and dusting of complete panel. |
| 9 | Installation of various components as described above in the APFC panel including mounting with suitable hardware and mounting arrangements electrical interconnections of control wiring with multi-strand copper wire and power connections with aluminum links etc. as required at site. |
| 10 | Testing & commissioning of HT Capacitor banks and fixed capacitor banks as per required parameters including following:- i) Continuity and earth test. ii) Meggering of all equipment for phase to phase, and phase to earth. |
| 11 | STATIC CAPACITORS BANK FOR TRANSFORMER 2000 KVA : 2 Nos. S/o of 80 kvar 3.3 kv, 3 ph. HT Fixed Capacitor banks for transformer, complete with terminal cover, mounting frame of angle iron, post insulators, aluminum bus bar links for fixing protective fuses and cable end box for cable termination-make Crompton/L&T/DJB approved make. |
| 12 | Termination of 35 mm sq. cable using necessary clamps, hardware, joint kit, lugs etc. as required at site. |
| 13 | S/o 70 A, 3.3 KV HRC fuses with links and hardware. Make:-. Copper Bussman/Anand |
| 14 | Fixing of 80 KVAr 3.3 kV HT fixed capacitor banks of transformer with angle iron frame work, necessary hardware and civil work if any and touching of rusted parts etc. including earthing of capacitor banks with GI wire/strip as required at site. |
| 15 | Testing & commissioning of HT Capacitor banks and fixed capacitor banks as per required parameters including following:-i) Continuity and earth test. ii) Meggering of all equipment for phase to phase, and phase to earth. banks. |
| 16 | CONVERSION OF STATIC TO APFC HT PANEL: 2 NOS. Dismantling of defective components like capacitors, fuses, post insulators, bus bars etc. from HT APFC panel including dismantling of terminations, mounting arrangements, hardware etc. as required at site. |
| 17 | Supply of 400 Amps, 3.3 kV, 3-Phase High Tension (HT) Vacuum Contactor complete with 220V AC solenoid coil, suitable for replacement of defective contactors in the existing HT panel. Make:-Crompton/L&T/DJB approved make. |
| 18 | S/o HT 75 KVAr capacitor bank, rated at 3.3 kv, 3 phase 50 Hz complete with bus bar links post insulators and necessary hardware - make.:- Crompton/L&T/ DJB approved make. |
| 19 | S/o HT 50 KVAr capacitor bank, rated at 3.3 kv, 3 phase 50 Hz complete with bus bar links post insulators and necessary hardware. Make: - Crompton/L&T/ DJB approved make. |
| 20 | S/o 45 A, 3.3 KV HT HRC fuses with links and hardware for replacement of blown off fuses. Make: - Copper Bussman/Anand. |
| 21 | S/o microprocessor HT APFC relay, Aux. Voltage 415 V, with digital display of power factor and other parameter. Make:-L&T/TDK/ DJB approved make. |
| 22 | Power wiring with 70/10 or suitable size aluminum bus bar for connection between Vacuum Contactor, Capacitors and HT HRC Fuse with other necessary hardware etc. as required at site. |
| 23 | Control wiring with 1.5 sq. mm copper with lugs, thimble, tape etc. and necessary hardware required at site. |
| 24 | S/o SP MCB of 16A. Make: - L&T / Havells/ DJB approved make. |
| 25 | S/o LED indication lights of various colours. Make: - L&T/ DJB approved make. |
| 26 | S/o Push buttons for replacement of defective push buttons to switch ON and OFF capacitor banks in manual mode. Make: - L&T/ DJB approved make. |
| 27 | S/o Auto/Manual selector switch, suitable for panel mounting, used for selecting automatic and manual operation modes in control circuits. Make: L&T / FTC/ DJB approved make. |
| 28 | S/o auxiliary contactor, model MXO-22 or equivalent, having 2NO + 2NC contacts, suitable for control circuit applications in electrical panels. Make:- L&T / Havells/ DJB approved make. |
| 29 | Installation of various components as described above in the APFC panel including mounting with suitable hardware and mounting arrangements electrical interconnections of control wiring with multi-strand copper wire and power connections with aluminum links etc. as required at site. |
| 30 | Testing & commissioning of APFC panels and fixed capacitor banks as per required parameters including following:- i) Continuity and earth test. ii) Meggering of all equipment for phase to phase, and phase to earth. iii) All function tests of complete installation iv Monitoring of power factor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender