Tender For Repair & Replacement Of Main Gates At 220 Kv Sub Station Bbmb Jagadhari.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2026
6 days left
EMD
6500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Yamunanagar → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Replacement Of Main Gates At 220 Kv Sub Station Bbmb Jagadhari.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Aug-2026 | Corringendum-1 | Date | 07-Sep-2026 |
| 2 | 07-Sep-2026 | Corringendum2 | Date | 16-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking with in 50 metres lead. (Ref Pb CSR 2020- 8.46) L/R |
| 3 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick - Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in15cm, layers with compaction including disposal of all surplus soil as directed with in lead of 30 metres.(Ref Pb CSR 2020- 6.6) T/R |
| 4 | Cement concrete 1:2:4 With stone ballast or shingle mixing by manual means (Ref Pb CSR 2020- 10.13 a(i)) T/R |
| 5 | Providing & fixing 16 gauge stainless steel pipe gate of grade 304 duly fixed at site with the help of M.S pivot & hinges grouted in cement concrete complete in all respect as per any kind of drawing & design (Ref Pb CSR 2020- 18.47) T/R |
| 6 | Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado wall sand pillars laid in 12.5 mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. (Ref Pb CSR 2020- 14.87) T/R |
| 7 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. (Ref Pb CSR 2020- 14.158) T/R |
| 8 | Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge.3mm thick ACP Sheet (Ref Pb CSR 2020- 17.97(iii))T/R |
| 9 | Providing and fixing Golden Metal 16-18 gauge, grade 304 stainless steel 15 inch Latter with light Complete in all respects as per direction of Engineer-in-charge. (NSI) T/R |
| 10 | Providing and fixing Logo Metal 16-18 gauge, grade 304 stainless steel base with metal stainless steel Front with UV work on Acric Complete in all respects as per direction of Engineer-in-charge. (NSI) T/R |
| 11 | Cement concrete 1:4:8 with stone ballast 20mm gauge .(Ref Pb CSR 2020- 10.11 (a)i) T/R |
| 12 | Boulder masonry in cement mortar (1:6) in foundations and plinth.(Ref Pb CSR 2020- 12.33) T/R |
| 13 | Earth filling: Earth work (inclusive of compensation for earth) in excavation in ordinary soil or soil containing gravel or kankar upto 40% and filling in 15cm layers in foundation and plinth including ramming watering and consolidating with carriage.(NSI) T/R |
| 14 | Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting of reinforced cement concrete spigot and socketed pipes and specials with rubber ring ISI marekd as per IS code IS458-2003 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed.The pipes shall rest on the beds at all joints through their length sand fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc.R.C.C. Pipe NP -3 300mm i/d pipe (Ref Pb CSR 2020- 29.46 C (e)) T/R |
| 15 | Providing and laying 60 mm thick factory madecement concrete interlocking Paving blocks of M-35 grade manufactured by block makingmachine equipped with steel mould clamped to astrong vibratory table with hydraulic pressure forcompaction of concrete as per IRC SP 63 -2014and of approved size and design / shape laid inOrdinary Grey Colour and pattern over andincluding 40 mm thick compacted bed of coarsesand, filling the joints with fine sand etc, allcomplete as per directions of Engineer-in-Charge. (Ref Pb CSR 2020- 14.138) T/R |
| 16 | Providing and laying flamed finish Granite stone 18mm thick in flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.(Ref Pb CSR 2020- 14.89a) T/R |
| 17 | First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth (Ref Pb CSR 2020- 11.3(i)) T/R |
| 18 | Precast Cement Concrete Kerb Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications (Ref Pb CSR 2020- 24.41a) T/R Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 16, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender