Tender For repair renovation Damages Of Lwss Mandhol In G.P Mandhol In Tehsil Jubbal Distt. Shimla (H.P) (Sh: Laying, Jointing, Testing And Butt Welding Of G.I Pipes Of Various Dia). (Estimated Cost:- 5,20,956/-, Earnest Money Rs:- 10,500/- 3 Months.
Tender Value
5.20 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
7 days left
EMD
10500
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair renovation Damages Of Lwss Mandhol In G.P Mandhol In Tehsil Jubbal Distt. Shimla (H.P) (Sh: Laying, Jointing, Testing And Butt Welding Of G.I Pipes Of Various Dia). (Estimated Cost:- 5,20,956/-, Earnest Money Rs:- 10,500/- 3 Months.)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge. |
| 2 | Laying , jointing and testing in trenches Galvanised Mild Steel tube of the following dia metres including smooth bending by necessary bends, or through pipe bending machine with necessary all pipe fittings such as Tees, Elbows, Union & Reducers etc. of ISI marked & testing for leakage complete with in all leads & lifts as per entire satisfication of Engineer - in - charge. (Earth work in trenches to be measured and paid for separately) |
| 3 | 15mm dia |
| 4 | 25mm dia |
| 5 | Providing and fixing of brass full way wheel valves (Heavy Duty) inclusive necessary all pipe fittings with in all leads and lifts as per direction of Engineer-in-Charge. |
| 6 | 15 mm dia. |
| 7 | 25 mm dia. |
| 8 | Cutting of threaded pipe dia 65mm (L) from both sides of socket to plain ended pipe for butt welding complete as per the entire satisfection of Engineer in Charge. |
| 9 | 65 mm dia. |
| 10 | 80 mm dia. |
| 11 | Laying, butt welding and testing of ISI marked steel tubes plain ended in trenches of following dia as per IS 1239-2001, including jointing the pipes with butt welding at both the ends according to relevant BIS standards/approved specifications including manufacturing reducers/tapers, all short pices and bends as per site requirement and made from parent tubes ( to be measurer and paid alongwith pipes. Bends shall be manufactured in such a way that not more than 111/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in-charge. The damaged portion of galvanization due welding shall be provided with anticorrosive treatment by providing two coats of bituminous paint over priming coat as per AWWA specification C-203-1978. (Earth work to be measure & paid for separately). |
| 12 | 80 mm dia. |
| 13 | 65 mm dia. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender