Tender For Restoration Of Ziyarat Hazrat Sheikh Attaullah (Ra) Drabgam Pulwama
Tender Value
88.05 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
17 days left
EMD
1.76 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Ziyarat Hazrat Sheikh Attaullah (Ra) Drabgam Pulwama
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 2 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 sqcm. and above. |
| 3 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In mud mortar |
| 4 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In lime mortar |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below |
| 6 | Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth .as directed all kinds of soil. |
| 7 | Providing and laying of stone soling hand packed and compacted with hand roller including carriage complete |
| 8 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforcement for R.C.C work including straightening cutting, bending placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more..Including carriage of all materials involved with loading unloading and stacking complete. |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 12 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 13 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in Lime mortar 1: 6 (1 Lime : 6 coarse sand) upto plinth level/Above Plinth level including curing One face dressed, |
| 14 | a) Fine Chisel Dressed |
| 15 | b) Rough Chisel Dressed |
| 16 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 18 | a)Columns, pillars, piers, abutments, posts and struts. |
| 19 | b) Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 20 | c) Arches, domes, vaults upto 6 m span |
| 21 | Tile brick masonry with common burnt clay tile bricks of class designation 10 in foundation and plinth including curing complete in Cement lime mortar 1:1:6 (1cement: 1 lime putty:6 fine sand) Maharaji Bricks |
| 22 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Ist class deodar wood |
| 23 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs i/c carriages complete job |
| 24 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 35mm thick First class kail wood with carving one side complete job. |
| 25 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick . |
| 26 | A) First class kail wood with carving on both side as per approved pattern complete job |
| 27 | B) Float glass panes 4 mm thick glass pane (weighing not less than 10 kg/sqm) |
| 28 | Providing and fixing of Pinjra Kari Heritage type work as per approved pattern/ design of 1st class Kashmiri local budloo wood complete job including Beading & necessary nails. (including polishing, cost of all material, leads, lifts and carriages etc upto site of work complete |
| 29 | Providing and fixing of 3.5 mm thick clear float glass panes including Beading & necessary nails complete job |
| 30 | Providing and fixing of 5 mm thick clear float glass panes including Beading & necessary nails complete job |
| 31 | Providing and fixing of ornamental type vertical posts of first class Kashmiri deodar wood of approved pattern and design including providing and applying two or more coats of touch wood polishing etc. complete in all respects.size 9\\"x9\\" dia. & 8.0\\" height) including all carriages by mechanical transport or by water transport upto site of work complete in all respects |
| 32 | Providing and fixing of Ornamental Second class local Deodar wooded eaves boarding 300x30 mm (nominal size) as per the approved/ available pattern and design incl cost of nails Complete job, cost of Touch wood with sealer over prepared base / Finishing to be approved by Engineer-in-charge. |
| 33 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 34 | P/F of 12mm thick Panelled/ overlapped planks made of 1st class Deodar wood as per the work in approved/available pattern and design for roof soffits & Ceiling on wood fase ceiling. partitions sawn and put-up in position in budloo wood (included Frame Work ).inciuding cost of necessary adhesive & cost of nails etc. complete job. incl cost of naiis/ screws & cost of Touch wood with sealer over prepared base/finishing to be approved by Engineer-in-charge. |
| 35 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Imported wood |
| 36 | Providing and fixing of 10mm thick commercial plywood including cost of nails/ screws complete job |
| 37 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Heritage pattern and design as per Engineer in Charge. (Pahal Gardan) |
| 38 | Providing hoisting and fixing trusses/purlins/rafters /posts/ post-plates or like components including cost of screws etc. complete. First class Budloo/Fir wood |
| 39 | Providing plain colour coated Sheets fixed with nails and G.I limpet washer ( including cost of all material , leads , lifts and carriage etc upto the site of work complete) with required head load complete. Sample and shade to be approved at site including cost of overlaps etc , finished measurement to be taken at site.0.50mm thick |
| 40 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 41 | Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3kg/sqm including pointing in white cement with curing complete.8mm thick, Granite of any colour and shade |
| 42 | Providing and fixing wooden moulded corner beading of size 40 x 40 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. Second class kail wood |
| 43 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New work |
| 44 | Providing & applying of sand sealer and preparing the surface for final finish with touch wood Polishing on the sealer surface with spray gun all complete job. |
| 45 | Providing and fixing of Brass type Masjid minarets having minimum 2.5 feet height i/c all necessary fittings and fixtures complete job |
| 46 | P/F of heavy duty ornamental hardware items i/c cost of fittings and fixtures all complete |
| 47 | T-bolts 100mm |
| 48 | Handle 125mm |
| 49 | Handle 200mm |
| 50 | Ornamental Al-drop |
| 51 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory signage. |
| 52 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Frame for Signage boards i/c vertical posts)) |
| 53 | P/F of Devri Stone fine chiselled Ornamental Cornice 150mm in 1:6 Mix incl pointing in 1:2 Mix and also moulding of the edges as per the approved deisgn and pattern including cost & all carraiges upto the site |
| 54 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 55 | CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking |
| 56 | Sand for an avg lead of 15 kms. |
| 57 | Stone.Agg(40mm) for an avg lead of 15 kms. |
| 58 | Stone.Agg(20mm) for an avg lead of 15 kms. |
| 59 | B wall |
| 60 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, All kinds of soil : |
| 61 | Providing and laying of stone soiling dully hand packed including carriage of stone soling with loading unloading and stacking complete. |
| 62 | Providing and laying in position cement concrete of specified grade excl. the cost of centering and shutering. All work upto plinth level 1:4:8 (1cement: 4fine sand: 8 graded stone aggregate 40mm nominal size)(Crushed). |
| 63 | Providing and laying in position cement concrete of specified grade excl. the cost of centering and shutering. All work upto plinth level 1:2:4 (1cement: 2 fine sand: 4 graded stone aggregate 20mm nominal size)(Crushed). |
| 64 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 65 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 66 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm including all carriages complete |
| 67 | Applying priming coat:With ready mixed red oxide Zinc Chromate primer ofapproved brand and manufacture on steel galvanized iron/steel works |
| 68 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 69 | CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking |
| 70 | Sand for an avg lead of 15 kms. |
| 71 | Stone.Agg(40mm) for an avg lead of 15 kms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender