Tender For Renovation Of Watch Tower At Neyyar Hqs
Tender Value
1.73 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
5 days left
EMD
4400
Bank guarantee accepted
Document Fee
408
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Watch Tower At Neyyar Hqs
BOQ
| Sl. No. | Item Description |
| 1 | 1. Outside Watch Tower : Providing and lying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement :4 coarse sand (zone-III) derived from natural sources:8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 2 | Pointing on stone work with cement mortar 1:3(1 cement:3 fine sand) :Flush/Ruled pointing |
| 3 | 2. For Watch Tower : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 4 | Dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats, architrave, holdfasts etc. Complete and stacking within 50 metres lead: Of area beyond 3 sq. Metres |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with old fast lugs or with dash fasteners of required dia & amp: length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood/jack wood |
| 6 | Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. Pressed butthinges bright finished or required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer in-charge using Anjili/Jack wood |
| 7 | Providing and fixing paneling or planeling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25mm to 40 mm thick using good quality Anjili/Jack wood |
| 8 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. Pressed butthinges bright finished of required size with necessary screws . Using Anjili/jack wood 30mm thick shutters |
| 9 | Providing and fixing M.S. Round or squre bars with M.S., flats at required spacing in wooden frames of windows and clerestory windows. |
| 10 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20mm nominal size), painting two coats of approved wood preservative to sides of chowkhatsand making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. Door chowkhats |
| 11 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. Window chowkhats |
| 12 | Engaging man coolies for cleaning, stacking and allied works as directed by the officer in charge |
| 13 | Providing and laying water proofing treatment in sunken portion of WCs. Bathroom etc. By applying cement slurry mixed with water proofing cement compound consisting of applying: a) First layer of slurry of cement @0.488kg/sqm mixed with water proofing cement [email protected]/sqm. This layer will be allowed to air cure for 4 hours.b) Second layer of slurry of cement @0.242 kg/sqm mixed with water proofing cement compound @0.126kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry |
| 14 | 12mm cement plaster finished with a floating coat of neat cement of mix:1:3(1 cement : 3 fine sand) |
| 15 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 16 | Engaging welder/fitter for repair of existing steel/aluminium structures |
| 17 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq, meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead: With cement mortar 1:4(1 cement : fine sand) |
| 18 | Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work(hard and soft wood) |
| 19 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Tow or more coats on new work |
| 21 | Providing and fixing ISI marked oxidised M.S. Tower bolt black finish, (Barrel type) with necessary screws etc. Complete:(Copper oxidized as per IS:1378)200x10mm |
| 22 | Supplying and fixing 300 mm Aluminium aldrop |
| 23 | Providing and fixing iron hooks and eyes:150mm |
| 24 | Providing and fixing iron hooks and eyes:100mm |
| 25 | 3. Lopping of trees-to avoid obstructing the view: Cutting branches of trees overhanging above any structure of girth between 40cm to 60cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc. without making any damages to nearby structures etc. complete |
| 26 | Cutting branches of trees overhanging above any structures of girth between 60 cm to 90cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc. Without making any damages to nearby structures etc. complete |
| 27 | Lumsum Heading : LA Amount for Electrification Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender