Tender For Creation Of Cloak Room Facility For Patients And Attendants At The Basement Of Advanced Paediatric Centre, Pgimer, Chandigarh. Re:- Expansion Of Cloak Room
Tender Value
6.27 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
2 days left
EMD
12540
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Creation Of Cloak Room Facility For Patients And Attendants At The Basement Of Advanced Paediatric Centre, Pgimer, Chandigarh. Re:- Expansion Of Cloak Room
BOQ
| Sl. No. | Item Description |
| 1 | Fabrication, Supply and Installation of Heavy duty CRCA slotted angle racks of 2100mm (H) x 900mm (B) x 600mm (D) comprising of 05nos Shelves as per specifications to the entire satisfaction of the Engineer-In-Charge. |
| 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 3 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 4 | 12 mm cement plaster of mix : |
| 5 | 1:6 (1 cement: 6 fine sand) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work above plinth level: |
| 7 | 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40 mm nominal size) |
| 8 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 9 | 40 mm thick with 20 mm nominal size stone aggregate. |
| 10 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 11 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: |
| 13 | Two or more coats on new work |
| 14 | Supplying BRC fabric 25x25mm mesh of weight not less than 3.50kg/sqm by cutting, straightening and placing position into structural steel frame etc. in required size and shape excluding the cost of MS Flat beading (cost of beading shall be paid in respective item) complete to the entire satisfaction of Engineer-in-charge. |
| 15 | Wiring for light point / fan point/exhaust fan point/call bell point with 1.5mm2 FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate suitable GI box and earthing the point with 1.5mm2 FRLS PVC insulated copper conductor single core cable etc as required. |
| 16 | Group C |
| 17 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 18 | 4 Module (125mmX75mm) |
| 19 | 6 Module (200mmX75mm) |
| 20 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 21 | 20 mm |
| 22 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required. |
| 23 | 1 x 1.5 sq. mm |
| 24 | 2 x 4 sq. mm |
| 25 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 26 | 5/6 A switch |
| 27 | 3 Pin 5/6 A socket Outlet |
| 28 | SITC of IP40 Led fixture 40 W+/- 1W with Surface Mounted 4 Feet with Polycarbonate diffuser with aluminium housing minimum lumen output 4400 lumens with P.F.>0.95 with THD<10% ,CCT 5700K, CRI 80,Surge Protection 2 KV .The LEDs with minium life of 50000 burning hours. The Input voltage range shall be 150V to 270V. Fixing on wall/ceiling as per the satisfaction of the Engineer Incharge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender