Tender For Improvement Of Water Supply To Attabira Nac
Tender Value
4.46 Crore
Estimated cost
Bid Submission
04 Aug 2026
8 days left
EMD
4.46 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Water Supply To Attabira Nac
BOQ
| Sl. No. | Item Description |
| 1 | Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge. |
| 2 | Cutting concrete road of grannualar course of flexible pavments by mechanical mean and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge. |
| 3 | Removing & refixing of 80mm thick precast cement concrete interlocking paving block of all size over 50mm thick course sand bedding (duly compacted) including filling of joints with sand complete etc all complete and as per the specifications and directions of Engineer-in-charge. |
| 4 | 90% of removing area |
| 5 | Supplying all labour, T&P and earth work excavation in following kinds of soil within initial laed of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges &labour cess etc, as per direction of Engineer-in-charge |
| 6 | In all kinds of soil-95% of total E.W |
| 7 | Disintegrated rock not required blasting 5% (50% of the quantity) |
| 8 | Supplying all materials, labour and T&P for providing, laying, fixing & testing of D.I/C.I Specials, Bends, etc. in trenches confirming to IS: 1538 all complete as per specification and direction of Engineer-in-charge including supplying of all labour, material, T&P required to perform to work. (excluding earth work) Special material and Laying |
| 9 | 3% weight of pipe |
| 10 | Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete( Excluding cost of Rubber Gaskets) |
| 11 | 150mm diameter |
| 12 | 200mm diameter |
| 13 | 250mm diameter |
| 14 | 300mm diameter |
| 15 | Supplying all labour,T&P and Laying in trenches centrifugally Cast (Spun) Ductile Iron Pressure socket and spigot pipe Class-K-7 & K-9 cement mortar lining confirming to IS: 8329-2000 of the following nominal diameter as per specification and direction of Engineer-in-charge.(Earthwork in trenches, jointing of pipes,specials and fittings to be measured and paid for separately) including cost of transportation of D.I. pipe ,loading,unloading from departmental store to worksite within 5.00km lead) |
| 16 | 150mm dia DI (K7) |
| 17 | 200mm dia DI (K7) |
| 18 | 250mm dia DI (K9) |
| 19 | 300mm dia DI (K9) |
| 20 | Fixing DI Resilient Seated Glandless Sluice Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK/AUDCO |
| 21 | For Installation/Replacement of Sluice Valve in Existing Water Supply Pipe Line & Newly Proposed Pipeline for controlling flow & scouring Purpose. |
| 22 | 150mm Dia non raising type Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6) |
| 23 | 200mm Dia non raising type Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6) |
| 24 | 250mm Dia non raising type Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6) |
| 25 | 300mm Dia non raising type Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6) |
| 26 | Fixing Tamper Proof Kinetic Air Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps) as per specification complete PN 1.60 |
| 27 | 50mm dia Tamper Proof Kinetic Double Air Valve |
| 28 | 80mm dia Tamper Proof Kinetic Double Air Valve |
| 29 | Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (per each) |
| 30 | S.V. chamber internal size:-[0.75x0.75x1.225mtr] for 80mm dia to150mm dia S/V. |
| 31 | S.V. chamber internal size:-[0.750x0.75x1.485mtr] for 200mm. to 350mm .dia. S/V. |
| 32 | Supplying all materials,labour and T&P and Construction of Thrust Block of RCC M-20 -7 nos |
| 33 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 34 | Supplying all materials, labour, T&P and filling thrust block area with sand well watered and rammered including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc all complete as per specifiation and direction of Engineer-in-charge. |
| 35 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as per the direction of Engineer-in-charge. |
| 36 | Supplying all materials, labour, T&P and providing cement concrete(1:1.5:3) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as per the direction of Engineer-in-charge. |
| 37 | Total |
| 38 | Supply labour and material for M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge and direction as per Engineer In Charge. |
| 39 | 40% of RCC Thrust Block wor |
| 40 | Supply labour and material for Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor as per Engineer In Charge. |
| 41 | Supplying all labour and T&P for providing and laying MS pipe and specials including painting confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site |
| 42 | 150mm dia M.S.Pipe (4.50mm thick) |
| 43 | 150mm dia x 90' M.S. Bend/offset bend |
| 44 | 200mm dia M.S.Pipe (6.30mm thick) |
| 45 | 200mm dia x 90' M.S. Bend/offset bend |
| 46 | 250mm dia M.S.Pipe (6.30mm thick) |
| 47 | 250mm dia x 45' M.S. Bend/90' M.S bend/offset bend |
| 48 | 300mm dia M.S.Pipe (7.10mm thick) |
| 49 | 300mm dia x 45' M.S. Bend/90' M.S bend/offset bend |
| 50 | Providing flanged joints conforming to IS:3114-1994 to flanged Cast Iron pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification complete and direction of Engineer-in-charge. |
| 51 | 150mm dia M.S. Flange.(10mm thick) |
| 52 | 200mm dia M.S. Flange.(12mm thick) |
| 53 | 250mm dia M.S. Flange.(12mm thick) |
| 54 | 300mm dia M.S. Flange.(16mm thick) |
| 55 | Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete |
| 56 | Total |
| 57 | Supplying all labour and T&P for Welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site. |
| 58 | Same as cutting |
| 59 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge. |
| 60 | Total Filling Quantity |
| 61 | Supplying all materials, labour, T&P and filling in pipe line trenches with sand well watered and rammered including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc all complete as per specifiation and direction of Engineer-in-charge. |
| 62 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as per the direction of Engineer-in-charge. |
| 63 | Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as per the direction of Engineer-in-charge. |
| 64 | Providing Supplying, fitting and fixing of 80mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cutting corbelling, splays where ever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect as directed by Engineer in charge. |
| 65 | 10% of removing area |
| 66 | Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge. |
| 67 | Item2+3+ sand filling |
| 68 | Providing, fixing of DI Mechanical Joint Socket confirming to IS: 13382/ 92 to flanged ends of Cast Iron pipes or Ductile iron pipes of the following nominal diameter including testing of joints. |
| 69 | 150mm dia |
| 70 | 200mm dia |
| 71 | 250mm dia |
| 72 | 300mm dia |
| 73 | Providing, jointing, laying, testing and commissioning of MS pipe (suitable for pulling method for jointing) pipes for sewer line as per IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) with compliance for maintaining slope as per design by trenchless adopting HDD method (Horizontal Directional Drilling) below ground at all depth including carriage etc. complete in all respect, construction of thrust pit and receiving pit of required size upto 3 metre depth and soil investigation, making suitable arrangement for barricading of pits, traffic diversion, lights, traffic permission from relevant authority (though department will assist in getting the permission), refilling of pits in compacted layers of 150 mm including disposal of surplus material with all lift and lead upto 50 metre as per specification and the direction of the Engineer. Note-1 Length of pipe shall be measured in between the outer wall of two manholes / Inspection chambers, Pipe in the manhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable. Note- 2. Manual Pipe jacking is not permitted for workmen safety purpose. |
| 74 | Crossing 250mm |
| 75 | Design, Supply, Construction, Testing & Commisioning of Mass Balancing Reservoir (MBR) and Elevated Service Reservoirs (ESR's) and under ground reservoir(UGR) at Town all complete as per the direction of Engineer-in-charge. |
| 76 | Proposed ESR at Zone -2(700 KL)Staging height - 25m |
| 77 | Supplyting , all materials , labour , T&P, for design & Construction of CC Approach Road shall be of 50.00 x 4.00 mtr (width) with Hard soil/Morrum filling – 1.0 Mtr, Crusher Dust-0.1 Mtr with 40 mm size metal filling in sub-base – 0.1 Mtr and rough stone (300mm size) dry packing in berms & aprons including CC (1:3:6) of 100mm thick, CC (M-30) of 150mm thick for CC pavement etc.,.as per the specifications and directions of engineer-in-charge. |
| 78 | Supplying , all materials , labour , T&P, for Construction of RCC framed Boundary wall size (350 mtr length x 1.80 Mtrs. height) with Fly ash brick filler wall as per the specifications and directions of Engineer-in-charge |
| 79 | Supplying , all materials , labour , T&P, for design & Construction of 2 leaf SS Gate fixed with RCC pillar ( as per estimate ) 2 leaf SS gate (1.8m height x 6.0m) @ 30kg per sqmtr = 324kg & 1 leaf SS gate size ( 1.30mx 1.8mt ht.) 30kg/sqmtr=70.2kg as per the specifications and directions of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender