Tender For annual repair And maintenance of Govt Sr.Sec. School At Kuddu In Tehsil Jubbal Distt. Shimla H.P. (Sh:-Providing 15 Mm Cement Plaster, providing and Fixing Prepainted Sheet In Roof & Fencing Works Etc)

Sharing tender

Tender for annual repair And maintenance of Govt Sr.Sec. School At Kuddu In Tehsil Jubbal Distt. Shimla H.P. (Sh:-Providing 15 Mm Cement Plaster, providing and Fixing Prepainted Sheet In Roof & Fencing Works Etc) , Excavation In Foundations, Trenches Eti, In Carth Work It Upto 1.50 Antr Honght, Stacking The Cacavated Solent The Clear From The Edge Of Excavation And Then Returning The Stacked In 15Cm. (Fifteen Centimeter) Thick Layers, When Required In To Path, Sades Of Fromations Etc, Tinh Deputed Layer By Running And Watering And Then Disponing Of All Surplus Encarated Earth As Per Direction Of Engineer-In-Charge Within All , Providing And Laying Cement Concrete Of 1:4 :8. One Cement Four Coarse Sand. Eight Graded Stone Aggregate 40Mm Nominal Size) And Curing Complete Excluding Cost Of Centring And Shuttering In All Work Upto Plinth Level Inchiding All Leads And Lifts And Carriage Of Materials And Other Incidentals. , 15 Mm Cement Plaster In Single Coat On The Rough/Far Side Of Brick Concrete Stone Walls 1.6 (1 Cament 6 Sand )For Interior Plastering Upto For Two Level Including Arrises Internal Rounded Angles Chamfers And/Or Rounded Angles Not Exceeding 80Mm In Girth And Frished Even And Smooth. , Prowing Andfixing0.6 0Mm Thick Preparted Steel Sheed Roofing With Hot Dipped Metallic Zinc Coated Sheet With Top Coat Of Regularmodified Polyer Organic Coated Of 20 Microns Over 5 Microns Primer Coating To Back Concluding Vertical Curved Surface Fred With Polymer Coated J Or L Hooks, Bolts And Nuts 6Mm Dia Meter With Prepainted Impect And Rubber Washers Complete All Accesories As Required As Per The Direction Of Engineer-In-Charge , Steel Work Welded In Built Up Sections Framed Work, Including Cutting, Hosting, Fixing In Position And Applying A Prming Cost Of Approved Steel Primer Using Structural Steel Etc. As Required In Gratings, Frames, Guard Bar, Leder, Railings, Brackets, Gates And Similar Works. , Providing Corrugated G.S. Sheet .6.3Mm Thick Not Less Than275gm/Sqm.