Tender For Emergent Nature Of Day To Day Repairs And Maintenance Works In Bsnl Staff Quarter Colonies At Forest Colony And Gpo, Shillong For A Period Of Six Months In The Year 2026-2027
Tender Value
4.44 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
6 days left
EMD
8890
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Emergent Nature Of Day To Day Repairs And Maintenance Works In Bsnl Staff Quarter Colonies At Forest Colony And Gpo, Shillong For A Period Of Six Months In The Year 2026-2027
BOQ
| Sl. No. | Item Description |
| 1 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 2 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | a)1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | b)1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 7 | a)Sal wood |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 9 | a)30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 10 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 11 | a)250x16 mm |
| 12 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 13 | a)20 mm dia (heavy type) |
| 14 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 15 | 250x10 mm |
| 16 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 17 | a)125 mm |
| 18 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 19 | a)90 mm |
| 20 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 21 | a)250 mm weighing not less than 280 grams |
| 22 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 23 | a)Twin rubber stopper |
| 24 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge.Extruded section profile size 42x50 mm. |
| 25 | Providing and fixing to door frames. |
| 26 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. |
| 27 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 28 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 29 | a)40 mm thick with 20 mm nominal size stone aggregate |
| 30 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : |
| 31 | a) Second class deodar wood |
| 32 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 33 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 34 | a)75 mm diameter |
| 35 | b)110 mm diameter |
| 36 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 37 | i)Coupler |
| 38 | a)75mm |
| 39 | b)110mm |
| 40 | ii)Single tee with door |
| 41 | a)75x75x75 mm |
| 42 | b)110x110x110 mm |
| 43 | iii)Single tee without door |
| 44 | a)75x75x75 mm |
| 45 | b)110x110x110 mm |
| 46 | iv)Bend 87.5° |
| 47 | a)75 mm bend |
| 48 | b)110 mm bend |
| 49 | v)Shoe (Plain) |
| 50 | a)75 mm Shoe |
| 51 | b)110 mm Shoe |
| 52 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 53 | a)75 mm |
| 54 | b)110 mm |
| 55 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 56 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 57 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 58 | a)Two or more coats on new work. |
| 59 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 60 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 61 | a)Old work (one or more coats) |
| 62 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 63 | a)One coat. |
| 64 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 65 | a)With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. |
| 66 | b)With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 67 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 68 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 69 | a)One or more coats on old work. |
| 70 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 71 | a)With cement mortar 1:4 (1 cement : 4 fine sand). |
| 72 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 73 | a)Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 74 | Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. |
| 75 | a)Sal wood battens. |
| 76 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 77 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 78 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 79 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 80 | a) Orissa pattern W.C Pan of size 580x440 mm |
| 81 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 82 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. |
| 83 | (a) Internal Work- Exposed on wall |
| 84 | Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2 mm thick water proofing membrane , black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. |
| 85 | a)2mm (for corrugated roof sheets) |
| 86 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 87 | a)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 88 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 89 | a)Of area 3 sq. metres and below |
| 90 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 91 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 92 | a)W.C. pan with ISI marked white solid plastic seat and lid |
| 93 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board |
| 94 | a)510x1040 mm bowl depth 250 mm |
| 95 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 96 | a)Orissa pattern W.C. pan of size 580x440 mm |
| 97 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. A) 10 litre capacity - White |
| 98 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete |
| 99 | a) White solid plastic seat with lid |
| 100 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 101 | a)Rectangular shape 453x357 mm |
| 102 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe |
| 103 | a)32 mm dia |
| 104 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 105 | a)Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 106 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 107 | a) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 108 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 109 | a)15 mm nominal outer dia. Pipes. |
| 110 | b)20 mm nominal outer dia. Pipes. |
| 111 | c)25 mm nominal outer dia .Pipes. |
| 112 | d)32 mm nominal outer dia. Pipes. |
| 113 | e)40 mm nominal outer dia. Pipes. |
| 114 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 115 | a)40 mm nominal outer dia. Pipes. |
| 116 | b)50 mm nominal outer dia. Pipes. |
| 117 | Providing and fixing brass bib cock of approved quality : |
| 118 | a)15 mm diameter pipe. |
| 119 | Providing and fixing brass stop cock of approved quality : |
| 120 | a)15 mm nominal bore |
| 121 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 122 | a)25 mm nominal bore |
| 123 | b)32 mm nominal bore. |
| 124 | c)40 mm nominal bore |
| 125 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 126 | a)20 mm nominal bore |
| 127 | b)25 mm nominal bore |
| 128 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length |
| 129 | a)15 mm nominal bore |
| 130 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 131 | a)100 mm diameter |
| 132 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 133 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 134 | a)15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 135 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 136 | a)15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 137 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 138 | a)15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 139 | Providing and fixing PTMT, push cock of approved quality and colour. |
| 140 | a)15 mm nominal bore, 98 mm long. Weighing not less than 75 gms. |
| 141 | Providing and fixing PTMT grating of approved quality and colour. Circular type. |
| 142 | a)100 mm nominal dia. |
| 143 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 144 | a)20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 145 | b)25 mm nominal bore, 152 mm long. Weighing not less than 440 gms. |
| 146 | c)40mm nominal bore, 206mm long. Weighing not less than 690 gms. |
| 147 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
| 148 | a)15 mm nominal bore. Weighing not less than 32 gms. |
| 149 | b)20mm nominal bore. Weighing not less than 40 gms. |
| 150 | c)25mm nominal bore. Weighing not less than 62 gms. |
| 151 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours |
| 152 | (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) |
| 153 | Removing the damaged health faucet and providing and fixing a PTMT health faucet as detailed in item sub head of approved quality. The work includes all necessary operations and shall be completed as per the direction of the Engineer-in-Charge. |
| 154 | i) Health faucet with PVC pipe including holder. |
| 155 | ii) Two in One - Health faucet and Bibcock of 15 mm nominal bore with PVC pipe and holder. |
| 156 | Providing and fixing Sintex or equivalent PVC Cover on over head tank with locking arrangement etc complete as per direction of E.in C. |
| 157 | Removing chokage between sewer manhole to manhole in sewer lines of all diameters by excavating a trench at the point of blockage and puncturing the line as required. The work includes breaking the sewer pipe, removing obstacles, and repairing the pipe using jute and cement concrete. After repair, the trench shall be refilled upon hardening of the repaired area. Work to be completed in all respects.all asper direction of engineer in charge |
| 158 | Cleaning of sewer manhole by taking out sludge, building, rubbish and other waste materials from the manhole and flushing with sufficient quantity of water to: |
| 159 | Charges for arranging skilled labour like carpenter / plumber/Mason for attending minor repair works including cost of hiring charges for cutting machines, drilling machines and other tools required for carrying out the work. etc., complete as directed by the Engineer-in-charge. (The cost of required fittings & fixtures etc.shall be paid separately) |
| 160 | Charges for arranging unskilled labour/coolie/ beldar for attending minor works including cost of tools like hammer, chisel, spade, pick axe etc required for carrying out the work. etc., complete as directed by the Engineer-in-charge. (The cost of required fittings & fixtures etc.shall be paid separately) |
| 161 | Repairs to existing PVC flushing cisterns as per directions of Engineer-in-charge.. |
| 162 | a) Attending minor repair to flushing cistern by fixing Knob including washers,etc., complete for proper functioning of cistern |
| 163 | b) Attending repair to flushing cistern by replacing suitable internal siphon system set ., for proper functioning of cistern |
| 164 | Removal of wild grown vegetation at walls/ roofs and floors/ drainage systems/ water supplying stream of the building/ over head tanks or at any location at all levels, pouring acid at the effected places and applying any special chemical to affected area to prevent future vegetation growth and finishing the same with cement concrete/ repair plaster to match the surface of walls/ floors/ roofs., etc complete as per the directions of Engineer-in-charge. (any cement concrete/repair plastering done and where scafolding is required will be paid separately) (Uprooting of vegetation along with applying/spraying requisite chemical in each location will be measured as one job). |
| 165 | Providing & fixing 0.50 mm thick Aluminium sheet to toilet door shutters including cutting & folding to required size and shape with necessary aluminium/brass screws, nuts etc including removing & refixing the shutter as per direction of Engineer |
| 166 | Easing of wooden door and windows by removing and refixing after attending necessary repairs etc. including refixing old or missing screws if required and painting the repaired portion with synthetic enamel paint etc complete as directed by Eng-in-Charge |
| 167 | a) Doors (area up to 2.50 sqm) |
| 168 | b) Windows(area up to 1.50sqm) |
| 169 | c) Cupboards(area up to 2.50sqm) |
| 170 | Attending leakage from the nahani trap by dismantling the tiles,nahani trap,Cement concrte around it, replacing dismantled nahani trap with new 2 way nahani trap of approved quality 110mm x 75mm dia including providing and fixing 110mm dia PVC pipe in 110mm side of trap 15mm below finished floor level.(approx length 10 to15cm) , jointing of pipe and filling outer space of trap with cement mortar 1:3 (1Cement:3 coarse sand )and finishing top with white cement to match shade of tile etc. all complete as per the direction of Engineer in charge. |
| 171 | Providing and fixing single line scaffolding system upto the required height made with bamboo's of 75 to 100 mm dia, 1.2 m centre to centre, horizontal & vertical- joining with ropes including providing working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 172 | Cleaning of drainage line of diameter upto 200mm dia in the compound consisting of manholes, sewer lines, gully traps etc., including removing the sludge, silt, slash, waste etc., from the manholes and disposing the waste out side the compound etc., complete as per the direction of the Engineer-in-charge. |
| 173 | Cleaning of open surface drains of cross section upto 0.50 sqm including removing the sludge, silt, slash, waste etc., from the drains and disposing the waste out side the compound etc., complete and to ensure proper disposal of rain water in the compound as per the direction of the Engineer-in-charge. |
| 174 | Cleaning of choked WCs (Indian/ European) and ensuring smooth flow etc., complete including labour and necessasry tools as per direction of Engineer in Charge |
| 175 | Providing and fixing CPVC gate /ball valve with PVC handle of approved quality and make: |
| 176 | a) 20 mm nominal bore |
| 177 | b) 25 mm nominal bore |
| 178 | c) 40 mm nominal bore |
| 179 | Providing and fixing CPVC Union in CPVC pipe including cutting and fixing with necessary adhesive etc. complete (New work) : |
| 180 | a) 20 mm nominal bore |
| 181 | b) 25 mm nominal bore |
| 182 | c) 40 mm nominal bore |
| 183 | Credit for and taking away the unusable & unservicable steel window/Doors etcincluding transportation, loading etc., complete. The windows shall be disposed of on as is where is basis. Please Enable Macros to View BoQ information |
| 184 | Credit for and taking away the unusable & unservicable steel window/Doors etcincluding transportation, loading etc., complete. The windows shall be disposed of on as is where is basis. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender