Tender For special repair To Rd Road To Banduli Boxcell Culvert (4X5x4) At Ch 2/870 Km For The Year 2026-27
Tender Value
63.55 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
4 days left
EMD
63600
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kandhamal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To Rd Road To Banduli Boxcell Culvert (4X5x4) At Ch 2/870 Km For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavatgion of foundation work in hard soil or gravelly soil within initial lead of 50m and initial lift of 1.5mtr including rough dressing and breaking clods to maximum 5cm to 7cm and laying layers not exceeding 0.30M in depth to proper profile with cost conveyance taxes of all materials royalty , DMF EMF & Addl. charges of royalty including cost of labour T&P etc complete as per direction of the Engineer-in-charge |
| 2 | Providing supplying filling in foundation and plinth with fine course sand in required thick layers free from organic and materials, well watered and rammed including all cost conveyance, royality ncluding cost, conveyance, royality, DMF (10% over Royality), EMF (5% over Royality), Addl Charges, taxes and all Labour, cess, T&P articles required for the work etc. complete as per the specification and direction of the Engineer-in-charge. (Measurement will be taken on finished compacted section only) |
| 3 | Providing and laying plain cement concrete of M-15 of controlled quality having a minimum compressive strength (in work test) of 150Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using hard crusher broken granite materials of 40mm size and down graded consistence with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges of roaylty and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. Open Foundation |
| 4 | Sub-Structure |
| 5 | RCC of M-25 of controlled quality having minimum cube strength of 250 Kg/cm2 of 150 mm cubes at 28days with hard crusher broken granite chips of 20mm size and down graded consistence with strength and cover of concrete of approved quality from approved quarry including hoisting lowering and laying concrete in layers to the required thickness and compacting each layers by means of vibrator as per direction of Engineer in charge including watering with cost and carriage of water, curing and steel shuttering and finishing the exposed surface smooth providing grooves and beads where necessary with working of pumps and other T&P machineries as may be required for the work including cost, conveyance, royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges of roaylty taxes etc, of all materials required for the work with cess etc complete in all respect excluding cost conveyance of MS/TS rods labour for straightening cutting bending binding and tying the grills and placing in propore position as per specification and direction of Engineer in charge. RAFT |
| 6 | Hunch |
| 7 | Deck Slab |
| 8 | Providing and supplying of HYSD bars confirming to approved grade including straightening cutting bending bindiing lapping , welding etc confirming to ISI specification) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design placing the grills in position including cost & conveyance of tor steel & binding wires of 18 to 20 guage including cess etc complete as per the specifiction and direction of Engineer-in- charge |
| 9 | RCC of M-30 of controlled quality having minimum cube strength of 300 Kg/cm2 of 150 mm cubes at 28days with hard crusher broken granite chips of 20mm size and down graded consistence with strength and cover of concrete of approved quality from approved quarry including hoisting lowering and laying concrete in layers to the required thickness and compacting each layers by means of vibrator as per direction of Engineer in charge including watering with cost and carriage of water, curing and steel shuttering and finishing the exposed surface smooth providing grooves and beads where necessary with working of pumps and other T&P machineries as may be required for the work including cost, conveyance, royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges of roaylty taxes etc, of all materials required for the work with cess etc complete in all respect excluding cost conveyance of MS/TS rods labour for straightening cutting bending binding and tying the grills and placing in propore position as per specification and direction of Engineer in charge. Wearing Course |
| 10 | Construction of precast RCC railing of M30 grade, aggregate size not exceeding 12 mm as per approved drawings and technical specifications. including Cost, conveyance, royality, DMF (10% over Royality), EMF (5% over Royality), Addl Charges of roaylty taxes of all materials & labour,T&P,Cess complete as per direction of the Engineer- in - Charge |
| 11 | Supplying and fixing 15cm dia 1.00m long guard post of RCC (1:2:4) using 7.5 kg of steel for each guard post with 20mm down graded granite chips including cost of all materials, reinforcement, centering, shuttering and watering etc. complete as per direction of Engineer in charge. |
| 12 | Providing weep holes in Brick masonary/ Plain/ Reinforced concrete abutment, wing wall/ retaining wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of IV :20H towards drawing foce complete as per drawing and Technical as per the direction of the Engineer-in-charge. |
| 13 | Dismantling of cement concrete Grade M-15 & M-20 including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceble material and stacking the serviceable material with all lifts and lead of 1000 meters etc. complete as per the direction of Engineer in Charge |
| 14 | Providing rough stone dry packing/ boulder pitching/ boulder approns and revetment with using HG stones not less then 40 Kg. including cost and conveyance of all materials to site etc. complete for finished item of work including cost, conveyance, royalty,DMF (10% over Royality), EMF (5% over Royality), Addl Charges of roaylty taxes, labour T&P cess & all other materials required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 15 | Gravel backing to approns & revetments and providing filter media unsing gravel underneath pitching in slopes of road embankment with laterite moorum of approved quality from stacks stacked at work site or at approved stacking yard with cost, conveyance royality and other of all materials including cost of all labour, T&P and Cess required for the work etc complete in all respects as directed by the Engineer-In-charge |
| 16 | Construction of embankment with approved material obtained from borrow ptis with all lead and lifts transporting to site by mechanical means within a lead of 5Kms spreading,grading to required slope and compacting to meet requirements of table 300-2 & clause 305 of MOSRT & H specification including royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges of roaylty charges and cost of all materials labour charges,machineries, T & P cess etc required for the work complete as per direction of E.I.C |
| 17 | RCC of M-30 of controlled quality having minimum cube strength of 300 Kg/cm2 of 150 mm cubes at 28days with hard crusher broken granite chips of 12mm size and down graded consistence with strength and cover of concrete of approved quality from approved quarry including hoisting lowering and laying concrete in layers to the required thickness and compacting each layers by means of vibrator as per direction of Engineer in charge including watering with cost and carriage of water, curing and steel shuttering and finishing the exposed surface smooth providing grooves and beads where necessary with working of pumps and other T&P machineries as may be required for the work including cost, conveyance, royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges of roaylty taxes etc, of all materials required for the work with cess etc complete in all respect excluding cost conveyance of MS/TS rods labour for straightening cutting bending binding and tying the grills and placing in propore position as per specification and direction of Engineer in charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender