Tender For Provn Of Practical Training Rooms (All Types) At Af Stn Vadodara
Tender Overview
Project Description
Tender for Provn Of Practical Training Rooms (All Types) At Af Stn Vadodara
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Aug-2026 | Corrigendum1 | Date | 01-Sep-2026 |
| 2 | 18-Aug-2026 | Corrigendum2 | BOQ | 01-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | BOQ 82330/CHL/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE (AF) CHILODA Name of Work: PROVN OF PRACTICAL TRAINING ROOMS (ALL TYPES) AT AF STN VADODARA CA No : CWE (AF) CHILODA /BRD / OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | NOTE: Schedule ‘A’ Part I to XI under Ser No. 1 to11 here in after are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only. |
| 3 | Lump sum price worked out for BUILDINGS/ STRUCTURES as listed in Sch 'A’ Part I. |
| 4 | Lump sum price worked out for SITE CLEARANCE, EXCAVATION & EARTH WORK as listed in Sch 'A’ Part II. |
| 5 | Lump sum price worked out for INTERNAL WATER SUPPLY as listed in Sch 'A’ Part III. |
| 6 | Lump sum price worked out for INTERNAL ELECTRIFICATION as listed in Sch 'A’ Part IV. |
| 7 | Lump sum price worked out for AREA DRAINAGE as listed in Sch 'A’ Part V. |
| 8 | Lump sum price worked out for ROAD/ PATH/ HARDSTANDING as listed in Sch 'A’ Part VII. |
| 9 | Lump sum price worked out for EXTERNAL WATER SUPPLY as listed in Sch 'A’ Part VIII. |
| 10 | Lump sum price worked out for EXTERNAL ELECTRIFICATION as listed in Sch 'A’ Part IX |
| 11 | Lump sum price worked out for LIGHTNING PROTECTION as listed in Sch 'A’ Part X |
| 12 | Lump sum price worked out for REFRIGERATION & AIR CONDITIONING as listed in Sch 'A’ Part XI |
| 13 | SCHEDULE `A' PART-XII (MISCELLANEOUS ITEMS OF WORK)(Note for following item- The contractor shall quote his rate for this item separately. The estimated rate is left blank since the same is not prepriced by MES) |
| 14 | REFRIGERATION & AIR CONDITIONING |
| 15 | S&F voltage stabilizer for automatic operation single phase, air cooled & designed for input variation between 150 to 300 volt with output stabilised to 230 Volt with accuracy of +-2.5% and cap 5 KVA ISI marked complete all as specified and as directed. |
| 16 | S&F changeover cum timer switch for 2 Ton split AC complete all as specified and as directed. |
| 17 | EXTERNAL WATER SUPPLY |
| 18 | M&Lfor Construction of brick masonry valve pit chamber of inner dimensions 750mmx750mmx750mm suitable for valves up to 200 mm size, with PCC 1:4:8 type D-2 for foundation, brick work in CM 1:6, rendering in CM 1:4 15 mm thick mixed with waterproofing compound, coping in PCC 1:2:4 type B1, including necessary earth work, form work and provision of MS sheet cover of thickness not less than 2.80 mm on 50 x 50 x 6.0mm angle iron frame with locking arrangement, including painting over MS surfaces with two coats of synthetic enamel paint over one coat of red oxide primer etc complete all asspecified and directed by Engineer-in-charge. |
| 19 | M&L for cutting of existing 50 mm Gl pipe and connected to 50 mm T then 50 mm to 25mm reducer for laying of 25mm Gl pipe for new connection complate all as specifiedand as directed. |
| 20 | EXTERNAL ELECTRIFICATION |
| 21 | Supply, installation, testing and commissioning of Cubical type LT panel board, outdoor type factory fabricated made out of CRCA sheet, CPRI approved mfd of 3.15 mm thick, fully enclosed and angle iron frame of size 40 x 40 x6 mm thick and T section with front openable Double Door shutter, dust and vermin proof and rear opening complete with locking arrangement, having a system of busbars of aluminium TPN 500 Amps conforming to IS :5082 duly insulated and mounted on epoxy/ Porclain insulators in totally enclosed chamber with 3 phase, 4 wire, 50 cycle, 415V, AC system pre-wired with suitable coper wire PVC insulated with all control accessories, duly painted internal externally with two coats of synthetic enamel paint of approved quality over a coat of red oxideprimer on PCC 1:2:4 type B-1 platform 60 cm above the ground level including connecting the existing cables/earthings with the proposed LT panel with suitable size of thimbles nuts, bolts and washer etc suitable for enclossing the following items (Propelar/eng bay -01)(a) Incoming(i) MCCB 4 Pole 200 Amp 35 kA with thermal based releses with overload zone of adjustment 0.4 to 1.0 In and electronic release with short circuit zone of adjustment 1.5 to 10.0 Ir (Adjusted current) with time incl extended Rotary Handle vari-depth type and spreater between phases and neutral- 02 NO(ii) ON Load changeover 4 Pole 200 Amp, = Qty 01 No |
| 22 | (b) Outgoing :-(iii) MCCB TP 100 Amp 35 KA with thermal based releses with overloadzone of adjustment 0.4 to 1.0 In and electronic release with short circuit zone ofadjustment 1.5 to 10.0 Ir (Adjusted current) with time incl extended Rotary Handlevari-depth type and spreader between phases and neutral -03 No(iv) MCCB TP 63 Amp 25 KA with thermal based releses with overload zone ofadjustment 0.4 to 1.0 In and electronic release with short circuit zone ofadjustment 1.5 to 10.0 Ir (Adjusted current) with time incl extended Rotary Handlevari-depth type and spreader between phases and neutral -02 No(vi) Aluminium bus bar 3 phase, 4 wire 500 Amp rating(vii) hylem sheet, bridge insulator cable gland(vii) Indicating lamp R,Y,B(vii) Digital type Volt meter /Amp. Meter(x)Digital frequency meter having range 0-50Hz-01 No(x)Digital PF meter-01 No |
| 23 | INTERNAL ELECTRIFICATION |
| 24 | Supply & fix load line TPN vertical DB's provision for TPN MCCB Frame upto 160 Amp in 25 KA, as incommer 4 way all as specified and directed. |
| 25 | Supply and fix in DBs 'G' frame MCCB 125 AMP, 03 pole 36 KA all as specified and directed by Engr-in-Charge. |
| 26 | S&F aesthetically designed vertical type LED security light suitable for building lighting of 45 watts system wattage for energy saving having IP 65 degree of protection, with minimumsystem efficiency as>85%, made of pressure die casting aluminum housing power coated in graphite grey and heat resistant toughened glass with excellent thermal management LED should have lens optics and vandal proof prismatic poly carbonate covers for ensuring efficient optics and uniform distribution of light. Fitting should have operating voltage range of 120-270V AC, THD<10%, P.F>.95 ,The fitting should have in built surge protector of 10 KV with GI pipe bracket of 40mm dia pipe of 600mm long with necessary fixing arrangement andfastner boalt complete all as specified and directed. |
| 27 | S&F PVC exhaust fan 200mm sweep including making hole for 200mm exhaust fan and making good disturbed surfaces complete all as specified and directed. |
| 28 | SEWAGE DISPOSAL |
| 29 | M&L for RCC NP3 150 mm diameter cement concrete Pipes for depth 0.7m to 1.65m laid on150 mm thick bed PCC 1:4:8 with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional complete all as specified and directed. |
| 30 | M&L for 20 user capacity conventional type on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete |
| 31 | M&L for Soakage well of size 1.8M dia and 3.0 M effective depth, excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including |intercepting chamber and screen chamber made of Brick masonary in CM(1:4), RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of appropriate size complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender