Tender For Design, Supply, Installation, Testing & Commissioning Of Mechanical Equipment For Modern Slaughter House, At Gagadanji, Qazigund. 1.Supply, Fabrication, & Installation Of Hanging Arrangement For Modern Slaughter House Gagadanji Qazigund. 2
Tender Value
1.08 Crore
Estimated cost
Bid Submission
01 Aug 2026
9 days left
EMD
2.16 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Design, Supply, Installation, Testing & Commissioning Of Mechanical Equipment For Modern Slaughter House, At Gagadanji, Qazigund. 1.Supply, Fabrication, & Installation Of Hanging Arrangement For Modern Slaughter House Gagadanji Qazigund. 2.Supply, Installation, Testing & Commissioning Of Machinery For Modern Slaughter House Gagadanji Qazigund. Advertised Cost=₹ 108.01 Lacs (Amount Without Gst= ₹ 91.54 Lacs, Gst Amount=₹ 16.47 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing & Commissioning of Electric Stunner for small animals: Head only- Stunner tongs with Scissor or Fork like arrangement, Stainless steel stunning pliers with spiral cable, special handles and copper electrodes with central spike for secure contact, 1500 watt Power, Single Phase, Transformer, electronic high frequency with optimized stunning parameters viz. Current (A); Frequency (Hz), Adjustable voltage for different animals and stunning time of 1-5 Secs for a high meat quality, Digital meters for voltage and Current .Arm length not less than 750 mm and Jaw Gap of minimum 300mm width with suitable electric conductors and contacts for stunning of Sheep & Goat as per guidelines. |
| 2 | Supply, Installation, Testing & Commissioning of Hydraulic Sheep Dehider:• Hydraulic Sheep Dehiding MachineFunction: To remove the hide from the carcass after bleeding.Specifications:3-4kW motor , 410V+- (15%)/50Hz/3P , SS304 Skin rollers, speed 40-50 rpm, pressure 5-6 MpaNote: Machine must be supplied with Control Panel with starter and all necessary tool kits and connections as part of its installation along with SS304 Support column, proper foundation, anchor bolts,, driving motor, Oil Cylinders, Hydraulic oil pipe of required pressure rating and safety factor. |
| 3 | Supply, Installation, Testing & Commissioning of Tripe Cleaning Machine• Function: For washing ingested dirt from sheep/goat tripe.• Capacity: Minimum 15-20 tripes per hour• Specifications: 4-6 kW Motor, 3 phase.• MOC: SS 304 Frame base, SS 304 tank, barrel type washing chamber,and circular rotary grid.•Adjustable Speed,drain hole at bottom Note: Machine must be supplied with Control Panel and starter with a proper foundation, anchor bolts, and all necessary tools and tackles as part of its installation. |
| 4 | Supply, installation, testing and commissioning of Electric Sharpening Machine with 10-12 inch grinding stone for sharpening of knives and other cutting tools, two-direction sharpening facility (clockwise and counter-clockwise rotation), water-cooled sharpening system to avoid overheating of blades, suitable for both wet and dry sharpening operations, equipped with 180-250 W single-phase electric motor operating at 110-150 RPM, designed for sharpening of knives, chisels, scissors and similar hand tools. The job includes P/F of Starter and all standard accessories, mounting base, water tray, and all other components required for proper functioning. |
| 5 | Supply, installation, testing and commissioning of Air Compressor with copper wound motor, complete with air receiver tank and air distribution piping of suitable pressure rating for sheep inflating operation in slaughterhouse, including high-pressure air lines up to all required points, complete in all respects.Technical Specifications:Tank capacity: 100 litresMotor power: 1 HPMaximum working pressure: 8 BarMotor speed: 1450 / 2900 RPMScope of work includes: Provision of three (03) draw-out stations with GI/PU air piping of suitable diameter, with starter panel , 03 mobile air nozzles, fittings, valves, clamps, supports, testing and commissioning, complete for operational use in slaughterhouse. |
| 6 | Freezer Room:Supply, installation, testing, and commissioning of a freezer room at site of size 12 x 10 ft specifically designed for hygienic meat storage, adhering to the following specifications:Performance: Capable of maintaining an internal temperature of -18°C at an ambient temperature of up to +35°C , with a pull-down period of 4-6 hours.Insulation & Enclosure: Fabricated from 80 mm thick, eco-friendly, \\"green\\" PUF panels with a density of 40 kg/m2. Panels shall feature PPGI sheet finishes on both inner and outer sides, a rib-type profile, and a cam-lock joint system and other allied accessories as required.Flooring & Safety: Includes 75/80 mm thick PUF slab insulation for the floor and an integrated pressure relief system. The floor must support a load capacity suitable for the intended operation. The floor shall be fitted with Aluminium cheqered plate of thickness 4 mm for an area of 120 sqft.Door: One (01) flush-type swing door,air tight with gaskets, 75/80 mm thick PUF insulated with PPGI finish on both sides.Storage shelves and overhead rail / channel system : The cold room shall be equipped with heavy-duty SS-304 stainless steel wire shelving, designed to safely support and store a minimum of 1000 kg of meat while ensuring unobstructed air circulation for uniform cooling. In addition, the room shall be provided with a ceiling-suspended SS-304 overhead rail/channel system of suitable section and load-bearing capacity, complete with food-grade SS-304 meat hooks, designed to accommodate and suspend 30–40 sheep carcasses under normal operating conditions. The entire hanging arrangement, including supports, fasteners, and suspension members, shall be structurally adequate to safely withstand the specified load with an appropriate factor of safety.Refrigeration System: Comprising two (02) independent, air-cooled split-type condensing units, each with a 2 TR capacity. Units shall feature hermetic or semi-hermetic compressors utilizing R-404a refrigerant.Evaporators & Accessories: Includes two (02) matching split-type evaporator units with an integrated defrost system. The circuit shall be complete with liquid line filter driers, oil separators, suction accumulators, and all standard refrigeration accessoriesElectrical & Control System:The installation shall feature a centralized control panel equipped with a main power switch, digital microprocessor-based controller with display for temperature management and system monitoring. The scope includes all multi-core copper cabling and conduits between indoor and outdoor units, IP-rated moisture-proof LED lighting for low-temperature environments, and all necessary components for a fully operational, integrated power distribution system.Compliance: The entire unit shall feature a hygienic design in full compliance with HACCP/FSSAI guidelines for meat storage. |
| 7 | Supplying & installation of approved make 1Ø, 1 HP,50Hz,220V, Centrifugal mono-block pump self-priming, connections,strainer, solid concrete foundation, including pipe and connection cable. Make: Reputed. |
| 8 | SS Apron Wash: Supply, Fabrication, Delivery, and Installation of an Industrial-grade, self-supporting Stainless Steel Apron Wash Station, engineered for abattoir hygiene environments to wash blood stains and organic matter from butchers' aprons post-stunning/halal operations. The Unit shall be in 304 SS execution and self supporting type with non-skid platform and foot operated valve and twin shower header and drain. The unit should have enclosure on 3 sides to avoid splashing of water. |
| 9 | Supply & Installation of Booster Pump (Single Phase, 220V power supply) with prime mover of 2.0 HP in Copper winding for maintaining adequate pressure in high-pressure cleaning line including pressure switch and Motor Starter.Head : 30 m .MOC: Cast Iron (Delivery Casing), Brass/SS (Impeller), Carbon Steel (Pump Shaft). |
| 10 | Providing of Heavy duty Professional Chef/Butcher Knife Set made of premium high carbon stainless steel with ergonomic firm-grip handles, complete with knife sheath, sharpening steel stick , knife storage box, leather knife holder, Finger Guards, safety gloves and portable carry bag, suitable for slaughter house applications.The set shall include:Sticking Knife,Skinning Knife,Stiff Boning Knife,Flexible Boning Knife,Breaking Knife (Cimeter/Scimitar type),Butcher Knife – general purpose heavy-duty slicing and trimming blade (8\\"–12\\"),Meat Cleaver. |
| 11 | Supply, installation, testing and commissioning of Digital Platform Weighing Scale with Built-in Thermal Printer to Print weight slips with company name, address, serial number, date, and time , Print a single weight slip for each package or use the M+ function to accumulate multiple weights and print a combined weight slip for multiple packages(Up to 20 packages in 1 lot) Minimum 200kg Capacity, 20g Accuracy with Calibration/ Verification certificate for Industrial use with SS Platform size 0.6 m x 0.6m and double (front and back digital)display. Rust Proof Powder Coated Heavy-duty Metal Body,Directly Plug-in 220V Power Adapter, power backup of 2 days , one year warranty against manufacturing defects. |
| 12 | Electronic Weighing Scale - Hanging type:Supply, Installation, Testing & Commissioning of Heavy Duty Digital Hanging Crane Scale complete with a maximum weighing capacity of 200-500 kg and an accuracy of ±0.1 kg (100 g) or better, employing a high-precision load cell for reliable and consistent weighing performance. The scale shall be provided with a large backlit LCD display having a minimum 20 mm high digits for clear visibility under both daylight and low-light conditions.The housing shall be fabricated from high-strength cast aluminium alloy, complete with a heavy-duty stainless steel hook and shackle, ensuring durability, corrosion resistance, and suitability for industrial applications. The unit shall incorporate a rechargeable battery capable of providing a minimum 15–20 days of standby operation on a full charge, with a charging time not exceeding 4 hours, complete with battery charger and low-battery indication. |
| 13 | Providing and fitting of Hand Cranking Rotating Type Grinder Wheel for Knife Sharpening, having minimum grinding wheel diameter of 14 cm, wall mounted including clamping arrangement and all necessary fittings and accessories. |
| 14 | Supply, Installation, Testing & Commissioning of Wall-mounted swinging type hose reel with SS drum, complete with R2 grade high-pressure flexible hydraulic hose of length 30m with crimped connectors, industrial grade SS/brass trigger-operated gun with adjustable spray pattern nozzle, heavy-duty mounting brackets, all fittings, pressure testing and commissioning as per specifications. |
| 15 | Meat Transport TrolleyProviding of Three-Tier Meat Transport Trolley fabricated entirely from food-grade AISI SS-304 stainless steel with minimum 1.2 mm thick sheet for trays/shelves and 38 mm dia × 1.5 mm thick SS tubular frame, complete with three-tier construction, ergonomically designed push handle, four heavy-duty swivel castor wheels of minimum 125 mm diameter (two with brakes), smooth welded hygienic finish, rounded edges, and corrosion-resistant construction suitable for slaughterhouse applications.The trolley shall have overall dimensions of 1200 mm (H) × 950 mm (L) × 750 mm (W) with 350 mm clear spacing between tiers and shall be capable of carrying not less than 30 kg of meat uniformly distributed. The trolley shall be supplied complete with 06 Nos. food-grade SS-304 tubs/trays of suitable size to fit the tiers, complete with all accessories, testing, commissioning, and demonstration. |
| 16 | Supply, Fabrication, and Fitting of Stainless Steel inspection table with 4\\" raised railing on all sides complete with heavy duty frame, smooth welds , food grade finish and adjustable legs.MOC: Made from 14-gauge top sheet, Food grade stainless steelFrame: SS food grade (50x50x1.6)mmLegs: (50x50)mmRailing Thickness: SS 1.5mm thickLoad Capacity : 200kGDimensions≥ 2mx0.9mx0.9m |
| 17 | Providing and fitting of Stainless Steel Utility Sink with mixer, manufactured from 16/18 gauge stainless steel sheets and pipes, ensuring high strength, durability, and corrosion resistance, with minimum overall dimensions of 24” × 24” × 34”, complete with all necessary fittings, supports, and installation accessories, finished and commissioned in all respects. |
| 18 | Providing, supplying and placing of Wheel Garbage Dustbin, made from 100% virgin plastic (HDPE) with UV-stabilized polyethylene for protection against sun rays, of heavy-duty and durable construction, colour coded as required, suitable for outdoor use, complete in all respects.Capacity 120 L |
| 19 | Capacity 240 L |
| 20 | Providing and fitting of triple-layer HDPE (High-Density Polyethylene) water storage tank of approved make and specified capacity, including hoisting and placing at any height/level. Scope includes drilling required holes, supplying and fixing all necessary connection accessories including GI/CPVC/UPVC inter connecting pipes, heavy-duty ball valves, brass full-way gate valves, automatic float valves, overflow, and scour/drain lines. Work shall include all internal and external interconnections, watertight jointing, alignment, testing, and commissioning, inclusive of necessary brick/concrete staging/platform adjustments, complete in all respects as per the directions of the EIC. |
| 21 | Supply, Installation, Testing and Commissioning of Electric Geyser of Reputed make and of approved Brand.Storage Capacity 100 Litres , Wattage 3000 Watts, Maximum Pressure 8 bar, BEE Rating 5 Star.Warranty: Min 5 years Product replacement warranty in case of Tank Leakage, Min 3 Years on Heating Element, Min 2 years comprehensive warranty. |
| 22 | Knife Sterilizer:Supply, Fabrication, Installation, Testing, and Commissioning (SITC) of an industrial, compact Electric Knife Sterilizer, custom-designed for abattoir processing lines. The knife sterilizer shall be in 304 SS construction and of sufficient size with hot water inlet connection and a drain. The unit shall be suitable for mounting on the side of wash basin or for use independently. The unit shall be provided with industrial type Electrical heating element of minimum 0.5 KW rating andIntegrated capillary thermostat adjustable up to 100 degrees celcius, featuring an automatic cut-off and dry-boil safety protection mechanism to prevent element burnout. |
| 23 | Providing, supplying, installing, testing and commissioning Electronic Insect Killer/Insect Light Trap having aluminium body construction, fitted with minimum 2 Nos. UV lamps of 18W/20W each, total power consumption not exceeding 60 watts, suitable for effective insect control in an area of 400–500 sq. ft., complete with insect collection tray, protective grill, mounting accessories, wiring from nearest power point, all necessary fittings and accessories, testing and commissioning, complete in all respects for satisfactory operation as approved by the Engineer-in-Charge. |
| 24 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) of dia 32mm pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per directions of Engineer-incharge. |
| 25 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) 25mm pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. The job includes 04Nos. dedicated draw-out stations for high pressure hose connectivity. |
| 26 | Providing of Anti-Slip Safety Boots, S5/SRC rated high-leg Nitrile boots for wet floors, pvc/tpu water proof aprons blood and fat resistant suitable for slaughterhouse applications. |
| 27 | Providing and fixing in position a heavy-duty, modular Slotted Angle Rack of overall dimensions 8' (H) x 8' (W) x 1.5' (D), consisting of Five shelves to ensure structural integrity across the 8' span, featuring vertical MS uprights of minimum (40x40x2)mm size with precision-punched slots for shelf adjustability, 1 mm thick MS shelves with triple-bend edges for enhanced load rigidity, and all necessary MS corner plates and high-tensile zinc-plated fasteners, finished with a high-quality scratch-resistant powder coating and securely floor-anchored using expansion bolts or dash fasteners as per the directions of the Engineer-in-Charge. |
| 28 | Providing and fixing of Waterproof Opaque Curtains for Bleeding Area, made of heavy-duty PVC / vinyl material, suitable for slaughterhouse use, to visually separate live animal holding area from bleeding area (height 10' and width 10'), ensuring hygienic conditions and compliance with animal welfare norms, including SS hanging rails, hooks, rollers and all fixing accessories, complete in all respects. |
| 29 | Supply of Heavy duty Steel Locker with multiple cabinets in Fabricated out of 16 SWG CRCA Sheet metal with powder coating.All cabinets shall have separate locks.Size: 6'x4'x1.25' |
| 30 | Supply, installation, testing and commissioning of floor-mounted Control Panel of 150 Amps, 415V, 3-phase, 50Hz, fabricated from 16 SWG CRCA sheet steel with powder coated finish and IP65 degree of protection, complete with internal wiring, accessories and following components, complete in all respects:200A, 4P TPN MCCB incomer 200A Manual Changeover SwitchCopper busbars rated 250A with insulation sleeve/tape – 1 setOutgoing MCCBs (TPN type):63A – 2 Nos.40A – 2 Nos.32A – 4 Nos.MCBs:16A TPN – 8 Nos.32A DP – 2 Nos.16A DP – 10 Nos.5A SP – 20 Nos.Voltmeters with phase selector switches – 2 Nos.Ammeters with CTs – 8 Nos.Frequency meter – 1 No.Phase indicating lamps – 1 setInterconnecting copper wiring of suitable size and rating including ferruling – 1 setGland plates, cable glands and termination accessories – 1 setEarthing arrangement with copper earth bus and connections – 1 setIncluding: panel mounting, internal wiring, labeling, testing, inspection, and commissioning complete as per relevant IS standards and site requirements. |
| 31 | Supplying, laying, testing and commissioning of 3.5 C × 95 sqmm Aluminium XLPE insulated armoured power cable(conforming IS-7098 Part-I) 1100 Volt grade, ISI marked with alu. stranded /solid conductor. |
| 32 | Supplying, laying, testing and commissioning of 4C × 16 sqmm Aluminium XLPE insulated armoured power cable(conforming IS-7098 Part-I) 1100 Volt grade, ISI marked with alu. stranded /solid conductor including PVC conduit. |
| 33 | Supplying, laying, testing and commissioning of 4C × 10 sqmm Aluminium XLPE insulated armoured power cable(conforming IS-7098 Part-I) 1100 Volt grade, ISI marked with solid conductor. |
| 34 | Supplying, laying, testing and commissioning of 4C 6 sqmm Multistrand copper PVC insulated power cable(conforming IS-7098 Part-I) 1100 Volt grade, ISI marked with solid conductor. |
| 35 | Supplying, laying, testing and commissioning of 4C 4 sqmm Multistrand copper PVC insulated power cable(conforming IS-7098 Part-I) 1100 Volt grade, ISI marked with with solid conductor. |
| 36 | Supplying, laying, testing and commissioning of 4C 2.5 sqmm Multistrand copper PVC insulated power cable(conforming IS-7098 Part-I) 1100 Volt grade, ISI marked with with solid conductor. |
| 37 | Supplying, laying, testing and commissioning of 2C 4 sqmm Multistrand copper PVC insulated power cable(conforming IS-7098 Part-I) 1100 Volt grade, ISI marked with with solid conductor. |
| 38 | Supplying, laying, testing and commissioning of 2C 2.5 sqmm Multistrand copper PVC insulated power cable(conforming IS-7098 Part-I) 1100 Volt grade, ISI marked. |
| 39 | Supply, Installation, Testing & Commissioning of 75 kVA, 3-phase, Servo Stabiliser with following specifications:Capacity : 75 kVA - 3 PhaseLoad - Suitable for: 100% Balance / Unbalanced LoadInput Voltage - 150-470 V (P-P), 90-270 V (P-N)Output Voltage - 415 V AC +/- 1% (P-P), 230V (P-N)Winding Material - Copper Wound (Class 'F')Correction speed - > 20 v /secOver load capacity - 120% of total capacity for short duration.Cooling - Natural Oil cooledOperating Temperature. -15°C to 55 °C.Protection - Over voltage Protection; Under Voltage Protection; Short-circuit Protection (Through MCCB at Input); Single Phasing Preventer; Phase Reversal Preventer.Control card - Microprocessor Based Display Type Control System; Plug in type for Easy maintenance.Metering - Digital Type Voltage, Current & Frequency Meters for both input and output Indication.Operated Frequency - 47 to 53 HzSpike buster - 3 phase spike buster with high Joule rating.Motor for dimmers - Ac synchronous motorsCable gland - Cable gland for individual inputs and outputsWiring - Multi strand Copper wiring of Suitable CapacityCut Off Facility - Contactor Tripping for Overvoltage or Undervoltage cut-off situation.Oil Grade- Electrol IS:335 UN type 2Construction - As per IS : 2026Ingress Protection - IP 55 (Indoor)Paint - Powder Coated. |
| 40 | Supplying, laying, testing and commissioning of 2C 1.5 sqmm Multistrand copper PVC insulated power cable(conforming IS-7098 Part-I) 1100 Volt grade, ISI marked. |
| 41 | Supplying and Laying of medium class PVC Conduit along with accessories insurface/recess including cutting wall and making good the same in case of recessed conduit of Following Sizes:50 mm |
| 42 | 25 mm |
| 43 | Providing, Fitting, Testing and Commissioning of Chemical earthing with electrolytic copper bonded earth electrode 2.0 m long, 50 mm dia, including supply and filling of earthing chemical compound (not less than 50kg), GI/brass clamp with test link, PVC inspection chamber with cover, excavation of earth pit in all kinds of soil, backfilling, watering, compaction, and testing of earth resistance as per IS: 3043, complete in all respects as per directions of Engineer-in-Charge. |
| 44 | Supplying and laying 25 mm X 5 mm solid pure copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm). |
| 45 | Providing and laying insulated Copper earthing conductor of 4mm dia from earth electrode to earth bus/equipment, including fixing on wall/structure or laying in ground, protection with PVC/GI conduit wherever required, including clamps, saddles, jointing, making necessary connections, and testing, complete as per IS: 3043 and directions of Engineer-in-Charge. |
| 46 | Earth work in excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.Hard Rock (Blasting Prohibited). |
| 47 | Providing and laying of stone soling (hand packed) incl. backfilling, compacting in foundation trenches and carriage |
| 48 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 49 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.10.2.2 Welded: |
| 50 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering.1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 51 | 20mm cement plaster finished with a floating coat of neat cement of mix :13.9.1 1 : 3 ( 1 cement : 3 fine sand) |
| 52 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works. |
| 53 | Providing & Fixing MS manhole cover with frame ( 1.5' x 1.5' size) of approved make complete. |
| 54 | Supplying and Fixing of Sharp pointed Hooks (S type Hanging Hooks).MOC: SS 304Wire dia : 6mmLength: 10 inchNote: Equipment should confirm to representational images. |
| 55 | Providing and fitting of Heavy Duty SS 360 Swivel Ceiling Hook with Mounting Accessories Kit.Load Bearing Capacity 250KGNote: Equipment should confirm to representational images. |
| 56 | Providing and Fitting of Alloy Steel D-Hook Hanger (Heavy Duty) with Fasteners. |
| 57 | Providing and fitting of Dual Rail Pulley Hooks.1) 304 Stainless steel precision casting hanger2) 2Pcs roller with sealed metal bearings3) 304 Stainless steel hooks5) Load Bearing Capacity = 200 KGNote: Equipment should confirm to representational images. |
| 58 | Providing and Fitting of Heavy Duty SS Gambrel Hooks.Wire Dia - 6mm-8mmWeight Capacity 100 KGNote: Equipment should confirm to representational images. |
| 59 | Providing and fitting of Stainless Steel Chain with 8mm Snap Hook. |
| 60 | Providing and fitting of Heavy Duty SS Carabiner Clip - 10mm Oval Spring Snap Hook with Secure Screw Lock. |
| 61 | Providing and fitting of Heavy Duty MS Fasteners (M20/M16/M12/M10/M8) with Nuts, Bolts, Washers to securely fix Braces / Tie members with the wall/ fixing of Base Plates/Footing Plates complete. |
| 62 | Supply and fixing of Foundation Bolts (M20), including nuts, washers, positioning, alignment, and embedding in concrete as site requirements. |
| 63 | Applying a USDA/FDA-compliant food-grade epoxy coating system to structural steel, including all labor, materials, equipment, and surface preparation required to clean and abrasive blast steel in accordance with SSPC standards. Coating system shall be moisture and chemical resistant, suitable for washdown conditions, and applied to the manufacturer’s recommended dry film thickness in accordance with industry standards.Two Coats. |
| 64 | Design, Supply, Installation, Testing and Commissioning of Overhead Mono Rail Crane.Capacity 2 Ton.Wire :10mm, 6x36 Construction).Hoist Dutry: Class 2 as per IS 3177 / IS 807 Span: not less than 10 m.Height of lift not less than 3.5 m.Cross Travel: not less than 10 m.Box Type Girder: Depth ~ 450-500 mmTop Flange ~ 200x16 mmBottom Flange ~ 200x12mm Web Plates ~ 6-8 mm.Full Length Stiffeners at Intervals (1-1.5m)Vertical Support: 2xISMC 200 Built up Column or ISH 200.Base Plate: MS Flat 450 x 16mmAnchor Bolts / Fasteners: M20~M24RCC Foundation: 450x450x450 mm. Concrete: M20~M24.Motor Capacity:Hoisting & Aux: 1.5 - 2.0 HPCross Travel: 1-1.5 HP.Brake: Disc Brake.Speed:Hoisting & Aux- 2.5-3.0 m/minCross Travel - 12-15 m/minElectrically Powered Trolley➢ Designed Electrical Panel for power supply➢ Festoon System➢ Erection ChargesSuitable for indoor installation , complete with two independent electric wire rope hoists with linear travel on same bridge girder, end carriages, crane duty motors with brakes, limit switches, 4 Way pendant control with Push Buttons, electrical panel, Festoon system, safety devices, painting, trial run and load testing as per IS 3177 / IS 807, and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender