Tender For Ventilation And Allied Electrical Works At Academic Block At Govt. Medical College, Kasaragod
Tender Value
66.54 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
3 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kasaragod → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ventilation And Allied Electrical Works At Academic Block At Govt. Medical College, Kasaragod
BOQ
| Sl. No. | Item Description |
| 1 | VENTILATION FANS |
| 2 | OD241629/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum350 CFM (10mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 3 | OD241804/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 400 CFM (10mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 4 | OD241784/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 450 CFM (10mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 5 | OD241785/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 550 CFM (10mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 6 | OD241786/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 600 CFM (10mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 7 | OD241787/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 650 CFM (10mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications |
| 8 | OD241788/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 800 CFM (10mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 9 | OD241789/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 900 CFM (10mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 10 | OD241790/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 1000 CFM (10 mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 11 | OD241791/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 1100 CFM (15mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 12 | OD241792/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 1600 CFM (15mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 13 | OD241793/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 2000 CFM (15mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 14 | OD241794/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 2200 CFM (15mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 15 | OD241795/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 3500 CFM (15mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 16 | OD241796/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 4000 CFM (15mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 17 | OD241797/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 4500 CFM (15mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 18 | OD241798/2025-2026:Supply, Installation testing and commissioning of Double Skin Inline Cabinet fans of minimum 5000 CFM(- 15mm of WG ESP) capacity with suitable blower, Single/Three phase(IE3) direct driven/Belt driven motor for Fresh Air/Exhaust, structural supports , vibration isolator as required, starter panel, other accessories etc. Fans shall have AMCA certification for sound and air. The item shall be complete in all respects complying to technical specifications. |
| 19 | AIR DISTRIBUTION |
| 20 | 16.12.1.1:Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006 Thickness 0.63 mm sheet |
| 21 | 16.12.1.2:Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006 Thickness 0.80 mm sheet |
| 22 | 16.18:Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminum without volume control dampers with anti smudge ring and removable core. |
| 23 | 16.13:Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.Gl volume control duct damper |
| 24 | OD243582/2025-2026:Supply, Installation , testing and commissioning of Aluminium extruded exhaust air louvers with damper,bird screen etc.complete in all respects as per technical specifications. |
| 25 | OD243583/2025-2026:Supply, Installation ,testing commissioning of Fusible link type Fire damper of 16 gauge GI sheets with fire rating of 300 Deg C for 2 hr for air distribution Networks , complete in all respects as per the technical specifications. |
| 26 | Civil works for sign board |
| 27 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 28 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 29 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 30 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 31 | 10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 32 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 33 | 16.60.1:Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminimum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - lll of ASTM-D-4956-01 as approved by Engineer-in-Charge, letters, borders etc. as per IRC: 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class ll of ASTM -D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminimum alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminimum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the Engineer-in-Charges. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment ).Overhead informatory road signage |
| 34 | 8.8.1.3:Providing and fixing expansion hold fasteners on C.C./R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Wedge expansion typeFastener with threaded dia 12 mm |
| 35 | 16.21:Engraving letters in hard stone |
| 36 | OD296227/2025-2026:providing and fixing granite Stone slab work for wall lining upto 10 m height withspecial adhesive over 12mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.18 to 20 mm thick (mirror polished and machine cut polished edge)Granite stone slab of approved colour and shade |
| 37 | CABLES AND CABLING |
| 38 | 7.8.1:Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 39 | 4.6.2:Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 40 | 4.7.2:Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable tray \\"bends\\" (galvanization not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150mm width X 50mm depth X 1.6mm thickness |
| 41 | 4.8.2:Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable tray \\"Tee\\" (galvanization not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 42 | 4.9.2:Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"Cross member\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.150 mm width x 50 mm depth x 1.6 mm thickness |
| 43 | 4.10.2:Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"Reducer\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.150 mm width x 50 mm depth x 1.6 mm thickness |
| 44 | OD239788/2025-2026:Supplying and making end termination with brass compression gland and<br> copper<br>lugs for following size of PVC insulated and PVC sheathed / XLPE<br> copper<br>conductor cable of 1.1 KV grade as required.4C 4 sqmm Cu |
| 45 | OD239789/2025-2026:Supply of 4C 16 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS7098 (Part 1) amended upto date. |
| 46 | OD239790/2025-2026: Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 4C 4sqmm Cu |
| 47 | 7.7.1:Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 48 | 9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 49 | WIRING AND ACCESSORIES |
| 50 | 1.14.2:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 51 | MCBs AND DISTRIBUTION BOARDS |
| 52 | 90.11.1.18:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) |
| 53 | OD239794/2025-2026:Supply, Installation, Testing & Commissioning of 32A DP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete. |
| 54 | OD239795/2025-2026:Supply and fixing of following 4 pole 40 amps. (415 Volts), 100mA sensitivity rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required |
| 55 | OD239887/2025-2026: Supply, Installation, Testing & Commissioning of 25/32A FP MCB isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete with all accessories |
| 56 | 2.10.4:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole |
| 57 | EARTHING AND SAFETY EQUIPMENTS |
| 58 | OD270306/2025-2026:Providing and fixing 3.15mm Cu (10 SWG) Cu wire on surface or in recess for connections etc. as required. |
| 59 | 5.15:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender