Tender For Annual Repair To Non-Residential Buildings Of Chep, Chiplima
Tender Value
6.47 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
1 days left
EMD
6480
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Repair To Non-Residential Buildings Of Chep, Chiplima
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for plinth & foundation in ordinary soil within 50 mtrs. initial lead and 1.5 mtrs. initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.30 mtrs in depth & as per direction of Engineer-in-charge. |
| 2 | Supply & filling in foundation and plinth with sand watered and rammed including the cost, conveyance, royalty, all other taxes and labour charges etc. complete. & as per direction of Engineer-in-charge. |
| 3 | Dismantling and removing 2.5 cm thick artificial stone flooring including stacking the useful materials for reuse and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge. |
| 4 | Cement concrete (1:2:4) to M 15 using 12 mm grade hard granite chips including lowering, laying concrete, watering and curing to required time etc. including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P required for the work etc. complete as per direction of Engineer-in-charge. |
| 5 | R.C.C. work of M 20 grade with 20 mm & down grade black hard granite chips (crusher broken) including hoisting, lowering, laying and compacting concrete, watering and curing for 28 days and finishing the exposed surfaces smooth, providing grooves or beds where necessary including cost of all materials (excluding cost of tor steel) and cost of all labour with T&P required as per direction of Engineer-in-charge. |
| 6 | Supplying, fitting and placing uncoated HYSD bar reinforcement including cost, conveyance, taxes of all materials and labour complete as per direction of Engineer-in-charge. |
| 7 | Rigid and smooth centring and shuttering for RCC works including false works and dismantling them after casting including cost of material complete for foundation, plinth band and footings bases of columns mass concrete precast slabs as per direction of Engineer-in-charge. |
| 8 | Brick masonry in cement mortar (1:6) using Fly Ash bricks 25cmx12cmx8cm size having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance of +/- 8% after immersing the bricks in water for six hours before using in superstructure including hoisting, placing in position, scaffolding splays, cutting circular moulding and curbelling, champering and similar such type of work, watering, curing to required time etc. including cost, conveyance and taxes of all materials and cost of all labour with T & P required for the work etc. complete as per direction of Engineer-in-charge. |
| 9 | 12 mm thick cement plaster (1:6) in finished smooth to inside/outside rough surface of walls after racking out the joints including watering, curing to required time, cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P required for the work complete etc. as per direction of Engineer-in-charge. |
| 10 | Priming one coat with any approved primer on Plastered surface after cleaning the surface, sand papering etc. including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge. |
| 11 | Wall painting two coats with weather seal coat paint of any approved shade over the exterior surface of walls including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge. |
| 12 | Fixing G.C.I sheet in roof drilling hole in wind ties including fixing of ridges, valleys, wind ties etc including cost of fittings complete, but excluding cost of G.C.I sheet. as per direction of Engineer-in-charge. |
| 13 | Supply of Materials |
| 14 | TATA BlueScope Sheet 14ft. Length, 0.47 thickness |
| 15 | TATA BlueScope Sheet 12ft. Length, 0.47 thickness Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender