Tender For Construction Of Anganwadi Building Gawthan Sonand @ Sonand Tal.Sangola. ( Anganwadi - T.S.525/2025-26 )
Tender Value
11.10 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Anganwadi Building Gawthan Sonand @ Sonand Tal.Sangola. ( Anganwadi - T.S.525/2025-26 )
BOQ
| Sl. No. | Item Description |
| 1 | Item 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m.beyond the building area and slacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.5 m.) By Mechanical Means SSR 197/21.02 |
| 2 | Item 2 Excavation for foundation in hard murum Including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Bd.A.2 Page One Number 259 SSR 197/21.06 |
| 3 | Item 3 Providing and laying Cast in situ/Ready Mix cement concrete, in M-10 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping. compacting, roughening them if special finish is to be provided, finishingif required and curing complete, with fully autornatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) SSR 226/24.01 |
| 4 | Item 4 Providing and laying in situ / Ready Mix cement concrete M-20 of trap/granite / quartzite / gneiss metal for R.C.C.work in foundations like raft, strip foundations,grillage and footings of R.C.C.columns and steel stanchions etc.including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) SSR.230/25.11 |
| 5 | Item 5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C.columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum. thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) SSR.232/25.31 |
| 6 | Item 6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork.cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc.complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. with fine aggregate (Natural Sand / Crushed sand VSt Grado finaly washed etc) SOR 234/25.50 |
| 7 | Item 7 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C.slabs and landings as per detailed designs and drawings including steel centering. formwork.cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 236/25.70 |
| 8 | Item 8 Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping.compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) SSR 239/26.05 |
| 9 | Item 9 Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C.pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis,copings, fins, arches etc as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR.245/26.33 |
| 10 | Item 10 Providing and fixing Information Sign Board of Size 0.90 X 0.60m. Prepared on 16 gauge Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.SSR.254/27.01 |
| 11 | Item 11 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR.254/27.05 |
| 12 | Item 12 Providing second class Burnt Brick masonry with conventional I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter /2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc.. complete. SSR.254/27.06 |
| 13 | Item 13 Filling in plinth and floors with contractors material / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm Including watering and compaction etc. complete. SSR.201/21.37 |
| 14 | Item 14 Providing internal cement plaster 12 mm thick in single coat in cement mortar 1.5 without neeru finish to concrete or brick surfaces, in all positonc including scaffolding and curing eto. complete.SSR.268/32.03. |
| 15 | Item 15 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete SSR.268/32.06. |
| 16 | Item 16 Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/ diamond pattern on a bed of 1:6 C.M. including cernent float, filling joints, with neat cernent slurry, curing. polishing and cleaning etc. complete SSR.273/33.01 |
| 17 | Item 17 Providing and fixing black kadappa stone as shelves 25 mm thick machine polished, extending the polish up to 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc.complete. CUP 276/33.23 |
| 18 | Item 18 Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting,opening for sink of required size in kadappah as well as granite etc.complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) SSR.350/41.78 |
| 19 | Item 19 Providing and fixing steel windows of verious as per detailed drawings without ventilator and steel frame of angle 40 x 40 x 5 mm and shutter frame of 25 x 25 x 5 mm and shutter with MS sheet of 18 guage of approved quality with hold fast neceaasry fixing and fixing and fastening and fixtures, necessary welding with oil painting three coats including primer coate complete as per detailed drawings and as directed. complete. (Including MS guard bars of 12 mm at 10 cm c/c and MS flat of 40 x 6 mm).As par RA |
| 20 | Item 20 Providing and fixing double leaf steel door without ventilator including shutter of MS frame of angle 50 x 50 x 6 mm and shutter frame of MS angle of 30 x 30 x 6 mm and shutter sheet of 10 guage of approved quality with hold fast neceaasry fixing and fastening and fixtures, necessary welding with oil painting three coats including primer coate complete as per detailed drawings and as directed complete. As par R A. |
| 21 | Item 21 Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm. As directed by Engineer in charge.39.56 |
| 22 | Item 22 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated 1.58 handles on both sides, etc complete. As directed by Engineer in charge. 39.58 |
| 23 | Item 23 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete SSR.251/26.46 |
| 24 | Item 24 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron. soil and vent pipe up to outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc.complete. SSR.355/42.30 |
| 25 | Item 25 Providing and fixing 75 mm dia stabiliser pipe/P.V.C.soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc.complete SSR.358/42.51 |
| 26 | Item 26 Providing soak pit of size 120 cm x 120 cm x 120cm Including 26 excavating and filling with brick-bats. SSR.353/42.19 |
| 27 | Item 27 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters SSR.358/42.53 |
| 28 | Item 28 Providing and fixing 15 mm dia. screw down bib/stop tap of brass including necessary socket union nut complete, SSR.345/41.40 |
| 29 | Item 29 Providing and fixing on walls /ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete.Including removing existing pipe line if necessary and 10.00 conveying and stacking the same in PWD chowky or as directed SSR.358/42.55 |
| 30 | Item 30 Providing and fixing on wails/ceiling / floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed SSR.358/42.56 |
| 31 | Item 31 Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing elc.complete SSR 276/33.24 |
| 32 | Item 32 Providing and laying ceramic tiles of having size 30 cm.x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry cleaning curing etc.complete.SSR.277/33.25 |
| 33 | Item 33 Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) SSR.291/36.11 |
| 34 | Item 34 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.SSR.287/35.14 |
| 35 | Item 35 Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4-79, with 3 rows of 50 mm dia. G.I. pipe 30 cm a part and fixed in M.S. channels of section 125 x 65 x 6 mm spaced 2.5 C/c 1:2:4 с.с.bedding of size 45 x 30cm. as per detailed drawing, with 3 coats of approved yellow and black paint including necessary excavation in any strata. |
| 36 | Item 36 Providing and fixing Information Sign Board of Size 0.90 X 0.60m. Prepared on 16 gauge M.S. Sheet with Horizontal bracing of M.S. Flat on size 25 X 6 mm including Painting with One Coat Zinc Chrome primer and Two coats oil painting including two number of M.S. angle Iron Post of Size 50 X 50 X 6 mm of 2.70 m long including Conveying all tazes fixing in Ground with cement concrete 1:4:8 block of 45 X 45 X 45 cm size as directed by Engineer in charge etc. complete. |
| 37 | Item 37 Basic Test of Aggrigate -Water Absorption, Sp. Gravity, Crushing Value |
| 38 | Item 38 CC Cube Compresive Strength |
| 39 | Item 39 Brick Water Absorption, Compressive Strength, Efflorescence |
| 40 | Item 40 Royalty Charges of Sand |
| 41 | Item 41 Royalty Charges other Minerals |
| 42 | Add GST for Work Portion 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender