Tender For Supplying And Fixing Of 15Hp Motor To Ondi Colony Sump And Desilting Of Existing Open Well At Manikandan Nagar In Kundrathur Municipality
Tender Value
5.80 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
15 days left
EMD
5800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanchipuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supplying And Fixing Of 15Hp Motor To Ondi Colony Sump And Desilting Of Existing Open Well At Manikandan Nagar In Kundrathur Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery of Open well Submersible pump set 15HP conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. |
| 2 | Labour charges for the erection of submersible pumpset in borewell /openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 3 | Supply and delivery of type Bore well submersible pumpset 50x200 LPM head Three Phase with ISI mark IS 8034/2002 without panel board as per specification for the eduty conditions detailed here under the motor fiftted with the pump should he category \\"B\\" suitable for installation in 15omm/155mm bore well the pumpset should be with 5 meter flate submersible copper cable the pump set should be delivered to for any where in Kancheepuram District including packing freight unloading stacking, transit and insurance charges etc., complete |
| 4 | Supply delivery and laying of PVC insulate 3 core 4.0sq.mm copper submersible flate cable conforming to IS 694/1990 and as amended from time to time with ISI marking of reputed make. The Rate inclusive of packing, loadding, freight, unloading, stacking, transit and insurance charges etc., complete |
| 5 | Removal Labour charges for the erection of submersible pumpset in borewell /openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 6 | Supply and Delivery of 1.8 metre dia Ring well |
| 7 | Supply and Delivery of 1.8 metre dia cover slab to Ring well |
| 8 | Earthwork excavation above water level in light or sandy or clayey soils for manhole wells, infiltration wells, suction wells etc. including levelling the site with an initial lead of 10 metres |
| 9 | Third depth of 2 metres |
| 10 | Fourth depth of 2 metres |
| 11 | Erection of Ring well below water level including all incidental charges using special tools and plants such as air compressor helmet etc. complete and including bailing out water. |
| 12 | Third depth of 2 metres |
| 13 | Fourth depth of 2 metres |
| 14 | Supply delivery and Fixing of 50mm UPVC Column Pipe Including Cost and conveyance of material and labour charges for Laying and Jointing of pipes, Testing and labour charges etc. |
| 15 | Re-erection Labour charges for the erection of submersible pumpset in borewell /openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 16 | Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of size 100 mm dia at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 17 | Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of size 150 mm dia at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender