Tender For Improvement To Joinery And Allied Works Of Type I Type Ii And Type Iii Accn For Civilians At Hq Sac(U)
Tender Value
43.62 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
14 days left
EMD
87240
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement To Joinery And Allied Works Of Type I Type Ii And Type Iii Accn For Civilians At Hq Sac(U)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames (without taking off shutter from the frame) not exc 1.5 sq. m each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames (without taking off shutter from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed. |
| 3 | Taking down shutters of any description exceeding 1 Sqm and n exc 2 Sqm each complete all as specified and directed. |
| 4 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size Frame size 100 X 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed. Note: For WPC solid door/window frames, +/- 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 5 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size Frame size 125 X 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed. Note: For WPC solid door/window frames, +/- 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 6 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints metered and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified and directed. |
| 7 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 Sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be metered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed. Note: For uPVC frame, sash and mullion extruded profiles +/- 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. etc. Profile of frame & sash shall be metered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed. continued in Sl.No: 08 |
| 8 | ContinuedNote: For uPVC frame, sash and mullion extruded profiles +/- 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed.Note:- Rate inclusive of glass pane / PVC Sheet complete all as specified and directed. Note: For uPVC frame, sash and mullion extruded profiles +/- 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.etc. Profile of frame & sash shall be metered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed. Note: For uPVC frame, sash and mullion extruded profiles +/- 5% tolerance in dimension i.e. in depth & width of profile shall be cceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 9 | Supply and fixing factory made uPVC white color Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window below 1.75 Sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be metered cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed. Note:(i) For uPVC frame and sash extruded profiles +/- 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (ii) Rate inclusive of glass panes / Stainless steel wire mesh pane.(iii) Rate inclusive of making good jambs and reveals etc. |
| 10 | Providing and fixing factory made uPVC white color casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( +/– 0.2mm).Window profile with hollow section with multichamber, frame (60mm x 58mm), sash (60mm x 73mm),T profile (One vertical length in between two shutters)(60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +/– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made ofzinc alloyed (white powder coated), But Hinges of 'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and directed. Note:(i) For uPVC frame and sash extruded profiles +/- 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Area exceeding 1 Sqm but not exceeding 2 Sqm each(ii) Rate inclusive of glass panes / Stainless steel wire mesh pane. (iii) Rate inclusive of making good jambs and reveals etc. |
| 11 | S&F mild steel work as framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 12 | M&L preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed. |
| 13 | S & F factory made second class HW 35 mm thick Plain paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkhats, complete all as specified and directed. |
| 14 | Supply and fix 2nd class hard wood 35 mm thick glazed and skeleton factory made shutters , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and metered beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) ; supplied and fitted to chowkhats complete all as specified and directed. |
| 15 | Resecuring or easing and fixing the shutters on WPC frame exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and directed. |
| 16 | S & F stainless steel of 0.36 mm nominal dia of wire and average width of aperature 1.4 mm, fixed with aluminum wire staples complete all as specified and directed. |
| 17 | S & F in repairs stainless steel of 0.36 mm nominal dia of wire and average width of aperature 1.4 mm, fixed with aluminum wire staples complete all as specified and directed. |
| 18 | S & F Stainless steel butt hinges 100 mm long, complete all as specified and directed. |
| 19 | S & F 300 mm long aluminum alloy, anodized, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. |
| 20 | S & F 200 mm long aluminum, anodized, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 21 | S & F 200mm long extruded aluminum alloy handles, fabricated type, anodized and fixed, complete all as specified and directed. |
| 22 | M & L MS Bands, straps, hold fasts and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 23 | M&L PCC 1:2:4 type Bo using 12.5mm graded stone aggregate as in cills, steps; seismic and other similar bands, plinth courses, string courses finished even and smooth including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 24 | M & L preparion of new wooden surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 25 | S&F Floor door stopper of aluminum alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length 140mm complete all as specified and directed. |
| 26 | S&F 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned joints including repairs to disturbed existing surfaces complete all as specified and directed. |
| 27 | Dismantling boarding including fittings, if any, any description fixed in any position with nails complete all as specified and directed. |
| 28 | M & L 18/19mm thick Marine plywood, prelaminated on both sides with decorative choice laminations, fixed with screws to timber frame work as in cupboards, ward drops, kitchen covered cabinet etc. including pvc decorative lipping around the plywood, complete all as specified and directed. |
| 29 | S&F stainless steel auto close hinges suitable for war drops, shutters etc. complete all as specified and directed. |
| 30 | S&F WPC 5mm thick for covering the backside of built in CB(wall) using wooden blocks fixing arrangments & using stainless steel screws including a coat of primer on backside in contact with wall complete all as specified and directed. |
| 31 | S&F 150mm brass handles for cupboards/ ward drop shutters, complete all as specified and directed. |
| 32 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 33 | S&F in repairs 25mm dia stainless steel curtain rod including supporting brackets and end caps/dome complete all as specified and directed. |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 35 | M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or color cement to match complete all as specified and directed. |
| 36 | M&L for rendering 10mm thick on fair faces of brick or concrete as in backing coat in CM 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender