Tender For special Repair And Replacement Of Shutters Of Stores For Bldg No P-57 (Cqm Store), P-58(Cqm Store), P-59(Clo Store) And P-60 (Salvage Store) Of Engr Regt & special Repair To Or Md Accn (Bldg No P-18/01 To 18/06) Of Eme At Vikram Batra Encl
Tender Value
29.43 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
2 days left
EMD
58860
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair And Replacement Of Shutters Of Stores For Bldg No P-57 (Cqm Store), P-58(Cqm Store), P-59(Clo Store) And P-60 (Salvage Store) Of Engr Regt & special Repair To Or Md Accn (Bldg No P-18/01 To 18/06) Of Eme At Vikram Batra Enclave At Old Amritsar Cantt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Brick tiles or terracing tiles, single layer on roofs ; Complete all as specified and as directed. |
| 2 | Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) ; Complete all as specified and as directed. |
| 3 | Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete fair finish, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and as directed. |
| 4 | Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and as directed. |
| 5 | Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms ; complete as per Manufacturer's instructios all as specified and as directed. |
| 6 | Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in Cement Mortar 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed. |
| 7 | All as per Srl Item No. 06 here-in-before but except brick tiles. Complete all as specified and as directed.Note:-Old serviceable tiles shall be reused. |
| 8 | Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore. Complete all as specified and as directed. |
| 9 | Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed. |
| 10 | Material & Labour for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, built in Cement Mortar 1:6 complete all as specified and directed. |
| 11 | Taking down cement plaster of any description on brick walls, etc including backing & raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 12 | Material & Labour for rendering 15 mm thick on brick work or concrete surfaces on walls in Cement Mortar 1:6 with using fosroc nitocole SN 522 as per manufactured instructions, finishing even and smooth without using extra cement complete all as specified and directed. |
| 13 | Material & Labour for rendering 15 mm thick on brick work or concrete surfaces on walls in Cement Mortar 1:4 with using WPC as per manufactured instructions, finishing even and fair without using extra cement complete all as specified and directed |
| 14 | Material & Labour for rendering 10 mm thick on brick work or concrete surfaces on ceiling in Cement Mortar 1:3 finishing even and smooth without using extra cement complete all as specified and directed. |
| 15 | Material & Labour in repair PCC 1:1.5:3 type B0 using 12.5 mm graded stone aggregate min thicness 50mm including necessary reinforcement for repair of Chajja, Fascia, parapets etc using chicken wiremesh upto 8 m height including necessary foRunning Metrework, scaffolding and applying two coats of cement base paint over coat of primer over cement plaster 1:4 complete all as specified and directed. |
| 16 | Material & Labour for applying two coats of whitewash on ceiling including preperation of newly plastered urfaces complete all as specified and directed. |
| 17 | Material & Labour preparation of newly plastered surface of wall and applying two coats cement base paint complete all as specified and directed. |
| 18 | Material and labour preparation of newly plastered/old decorated surface of wall and applying two coats of oil bound distemper over a coat of primer and 1m wall care putty filling Complete all as specified and as directed. |
| 19 | Supply & Fixing in repair Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding complete all as specified and directed. |
| 20 | Taking down chowkhat with shuttering (without taking off shutters from frame including grill & guard bars) size of shutter not exceeding 1.5 sqm each Complete all as specified and as directed. |
| 21 | All as per Srl item No 20 above but size of opening exceeding 1.5 Sqm but not exceeding 4 Sqm. Complete all as specified and as directed. |
| 22 | Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm. |
| 23 | Supply & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ Cubic Metre, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being teRunning Metreite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 24 | Supply & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/Cubic Metre and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being teRunning Metreite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, Complete all as specified and as directed. |
| 25 | Supply & Fixing factory made IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed |
| 26 | Material & Labour for two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of new surfaces. Complete all as specified and as directed. |
| 27 | Material & Labour for apply One coat of synthetic enamel pain on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of old surfaces complete all as specified and directed. |
| 28 | Supply & Fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. Complete all as specified and as directed. |
| 29 | Supply & Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed. Complete all as specified and as directed. |
| 30 | Supply & Fixing 150mm long Aluminium handles, cast type anodised. Complete all as specified and as directed. |
| 31 | Supply & Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 32 | Material and Labour in repair for factory made Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete all as specified and directed.(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf. Complete all as specified and as directed.Note :- Sheet glass, wire mesh and painting shall be measured and paid sperately. |
| 33 | Material and Labourin repair for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. Complete all as specified and as directed.NOTE:-Sheet glass and painting shall be measured and paid Separately. |
| 34 | Material & Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc in repair complete all as specified and directed |
| 35 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( including backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 36 | Supply & Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in Cement Mortar 1:6 & complete all as specified and directed. |
| 37 | Supply & Fixing glazed ceramic coloured tiles 450x350mmx 7mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in Cement Mortar 1:4 on brick surface complete all as specified and directed. |
| 38 | Supply and fixing in repairs vitreous china wash down water closet pan pedestal pattern white including fixing bolts incl white seat cover with flat bottom and cover and mild steel chromium plated hinging device (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 39 | Supply & Fixing PVC Jet spray suitable for EWC. Complete all as specified and as directed. |
| 40 | Supply and fixing Chromium plated Health faucet in repair with 1.5 metre long chain. Complete all as specified and as directed. |
| 41 | Supply & Fixing in repairs centre hole wall mixer cast copper alloy chromium plated with capston head srewed down high pressure with lettered hot or cold with long screwed shanks fly nut screwed for iron pipe 15mm. Complete all as specified and as directed. |
| 42 | Supply & Fixing in repair WHB mixture Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed. Complete all as specified and as directed. |
| 43 | Supply and fixing in repairs vitreous china wash hand basin white with flat back type size 550x400mm excluding taps chain and plug and porcelain stopper but including brackets CP waste coupling 32mm and PVC waste pipe 32mm dia including cutting for and pinning ends of brackets complete all as specified and directed. |
| 44 | Supply and fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 45 | Supply & Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail. Complete all as specified and as directed. |
| 46 | Supply & Fixing Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass corner shelf with chromium plated bracket guard and railing Complete all as specified and as directed. |
| 47 | Supply & Fixing PVC connection 15mm size with PTMT nuts of length 600mm. Complete all as specified and as directed. |
| 48 | S/F in repair 15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete. Complete all as specified and as directed. |
| 49 | Supply & Fixing in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed |
| 50 | Supply & Fixing in repairs 100mm dia CP grating with or without hole type complete all specified and directed. |
| 51 | Supply & Fixing in repairs CP brass towel rail of 20mm dia and 600mm long complete all as specified and directed. |
| 52 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any position & situation. Complete all as specified and as directed. |
| 53 | Suppy & laying 20mm of CPVC pipes brass threaded with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 54 | Supply & Fixing CP towel rail fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 55 | Supply & Fixing in repair vitreous China Squatting pan 'Orrisa' pattern size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore incl. flush pipe , cover Complete all as specified and as directed..Note:-Rate of supply for Flushing cistern have been taken separately. |
| 56 | Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed. |
| 57 | Supply and fixing in repair 15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete. Complete all as specified and as directed. |
| 58 | Supply & Fixing in repairs 125mm CP shower rose fancy type with CP aRunning Metre complete all as specified and directed. |
| 59 | Supply & Fixing in repair PVC (SWR) pipe 75mm dia fixed in wall/floor. Complete all as specified and as directed. |
| 60 | Supply and fixing in repair PVC (SWR) pipes single 110mm socketed, in any length with rubber ring joints, laid in trenches or in floors/wall. Complete all as specified and as directed. |
| 61 | Supply & Fixing 75mm PVC (SWR) bends any radius. Complete all as specified and as directed. |
| 62 | Supply & Fixing 110mm PVC (SWR) bends any radius. Complete all as specified and as directed. |
| 63 | Supply & Fixing 75mm PVC floor trap complete all as specified. Complete all as specified and as directed. |
| 64 | Supply and fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement Complete all as specified and as directed. |
| 65 | Supply & Fixing Solid PVC Door Frame of Size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube in opening as per specification and frawing. Complete all as specified and as directed. |
| 66 | Supply & Fixing 28 to 30 mm thick factory made solid PVC moulded Door shutter with 2,3 or 6 raised psnel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC Sheet on back face, fixing in frame at site as per specification and drawing. |
| 67 | Dismantling boarding with frame if any , any description , fixed in any position with screws. Complete all as specified and as directed. |
| 68 | Material and Labour fixed 18/19mm thick Prelaminated HDHMR board, interior grade, with decorative choice lamination, fixed with screws as in shelves/Shutters; Complete all as specified and directed. |
| 69 | Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50m but not exceeding 100 m away to low lying areas complete all as specified and directed. |
| 70 | Material & Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor. Complete all as specified and as directed. |
| 71 | Material & Labour Chequered cement concrete tiles 30cm x 30cm x 25mm thick over and including 15mm thick bedding layer in cement mortar 1:6,set and jointed in neat cement slurry and pointed in grey cement and pigment to match the colour of tiles complete all as specified and directed. |
| 72 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar. Complete all as specified and as directed. |
| 73 | Material & Labour Granite (of any type) work (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking platefoRunning Metres and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in Cement Mortar 1:4. Complete all as specified and as directed. |
| 74 | Material & Labour for Machine cut Kota stone slab as in steps/ flooring 20-25 mm thick (size not less than 0.5 sqm each) over cement screed base of 15mm thick in Cement Mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing Complete all as specified and as directed. |
| 75 | All as per srl Item No 74 here-in-before but as skirting/dado over rendering 10mm thick in Cement Mortar 1:4. |
| 76 | Material and labour in repair framed work as door, chowkhats, and Grill, gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing Complete all as specified and as directed. |
| 77 | Taking down existing old unserviceable rolling shutter of any descritiption fixed in any position all as specified and directed. |
| 78 | Supply & Fixing Steel rolling shutters, with ball bearing, gear operated type with bevel gear box and crank handle with safety lever locks mild steel with 4 lever for rolling shutter as specified including top cover, an-choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specified and directed by EIC. Note:Rolling shutter where the area of each shutter is upto 10 Sqm shall be fitted with three ball bearings & where area of each shutter is exceeding 10 Sqm and shall be fitted with four ball bearings Complete all as specified and as directed. |
| 79 | Material and labour for repair / replacement of damaged parts of existing Rolling shutter of Size 3.5m x 3.50 m including rolling shutter springs, Roller barrel, Roller assembly, 1.25mm thick top cover, gear box etc. and to make the rolling shutter in serviceable condition complete all as specified and as directed. NOTE : The Bidders are requested to visit the site to see the condition of rolling shutters and parts to be replaced to make the rolling shutter in serviceable condition and nothing exta shall be admissible later on this account. |
| 80 | Material and labour for repair / replacement of damaged parts of existing Rolling shutter of Size 3.00 m x 3.00 m including rolling shutter springs, Roller barrel, Roller assembly, 1.25mm thick top cover, gear box etc. and to make the rolling shutter in serviceable condition complete all as specified and as directed. NOTE : The Bidders are requested to visit the site to see the condition of rolling shutters and parts to be replaced to make the rolling shutter in serviceable condition and nothing exta shall be admissible later on this account. |
| 81 | Dismantling wronght iron mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge |
| 82 | Material & Labour two coats of synthetic enamel new steel surfaces of any descripton over 10 cm in width or girth not otherwise described above priming coat of red oxide including preparation of new surfaces complete all as specifiedv and directed. |
| 83 | Supply and fixing in repair PVC (SWR) pipes single 110mm socketed, in any length with rubber ring joints, laid in trenches or in floors/wall. Complete all as specified and as directed. |
| 84 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,teRunning Metreinal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as directed. |
| 85 | Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed. |
| 86 | Material & Labour point wiring for one light/ fan/ exhaust fan/calling bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including necessary cutting of chases in wall /ceiling etc and making good the disturbed surfaces match to existing with cement mortar 1:3 if required complete all as directed. |
| 87 | All as per item no 86 above but with cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on an independent board complete all as specified and directed. |
| 88 | All as per item no 86 above but with cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch complete all as specified and directed |
| 89 | All as per item no 86 above but for one bell/buzzer point controlled by one bell push single pole one way . |
| 90 | All as per item no 86 above but for one 3/6 pin 16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm complete all as specified and directed. |
| 91 | All as per item no 86 above but an independent board with cables of size 4.0 Sqmm complete all as specified and directed. |
| 92 | Supply & Fixing for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge. |
| 93 | Supply & Fixing modular bell push, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed. |
| 94 | Supply & Fixing for modular socket 3 Pin, 5/6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. |
| 95 | Supply & Fixing for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge. |
| 96 | Supply & Fixing for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge. |
| 97 | Supply and fixing in repair Sheet metal single pole and neutral enclosure (2P +E), 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps as specified and directed (for AC and Geysser). |
| 98 | Supply & Fixing Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 99 | Supply & Fixing in repair LED rechargeable emergency bulb auto on when power cuts of capacity 12 Watt (4-6 Hrs backup), B22D, holder base, energy efficient with polycabonate body and aluminium heat sink cool white day light complete all as specified and directed. Make :- Phillips / Havells / Crompton. |
| 100 | Supply & Fixing Ceiling Rose, 3 terminal,PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed. |
| 101 | Supply & Fixing in replacement electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed. |
| 102 | Supply & Fixing electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. |
| 103 | Supply & Fixing in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 104 | Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 105 | Supply & Fixing MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed. |
| 106 | Supply and fixing in replacement LED light fitting Mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 107 | Supply & Fixing in repair LED light fitting 1 x 9W / 1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 108 | Supply & Fixing in replacement LED tube light fittings of 1 x 20 Watt including rawl/plug, making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall fiRunning Metrely, complete all as specified and directed. |
| 109 | Supply & Fixing Modular TV Socket outlet single with inner and outer cover required module including TV cable required length from roof complete all as specified and directed by Engr-in-charge. |
| 110 | Supply & Fixing in repair decorative wall light fixture including LED bulb of 12 W (B-22 Base) WaRunning Metre White/Day Light made up of polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. |
| 111 | Supply & Fixing in replacement 30/35 Watt lighting luminaire with unique peanut optics to ensure unifoRunning Metre distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and connecting with three core flexible copper wire of size 23/0.0076 from ceiling rose to existing junction box complete all as specified and directed. |
| 112 | Supply & Fixing in repair SMC Single Phase 'Meter Box', shock, rust, weather & tamper proof, maintenance free, fire resitant proof of suitable size, concealed in existing wall including making goof to the disturbed surafce of wall with fitting of energy meter complete all as specified and directed by Engr-in-Charge. |
| 113 | Material & Labour in repair for Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below noRunning Metreal ground level with top edge of the plate not less than 1.5 m below noRunning Metreal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia defoRunning Metreed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc If earth resistance of earthing is not found (2 to 5 Ω) satisfactory earthing shall be redone by the contractor complete all as specified and directed. |
| 114 | Supply and Fixing in repair for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed. |
| 115 | Supply & Fixing sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area FRLSH PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25 mm dia 'medium grade' PVC concealed conduits and fittings, complete all as specified and directed. Note : One unit length shall measured as two run of main wire and one run of conduit & earth wire |
| 116 | Supply and fixing in repair Ceiling Fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE.Five star rated with brushless direct current motor (BLDC) including taking down old unsv one from the site and deposited to store yard of AGE E/M complete all as specified and directed. Please Enable Macros to View BoQ information |
| 117 | Supply and fixing in repair Ceiling Fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE.Five star rated with brushless direct current motor (BLDC) including taking down old unsv one from the site and deposited to store yard of AGE E/M complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender