Tender For Construction Of Multipurpose Hall At Kotdwar, Uttarakhand
Tender Value
6.03 Crore
Estimated cost
Bid Submission
11 Aug 2026
16 days left
EMD
12.07 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Multipurpose Hall At Kotdwar, Uttarakhand
BOQ
| Sl. No. | Item Description |
| 1 | DSR Item- 2.6.1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. :All kinds of soil. |
| 2 | DSR Item- 2.25Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 3 | DSR Item- 2.25(a)Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete. |
| 4 | DSR Item- 2.27Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. |
| 5 | DSR Item- 2.35.3.1Diluting and injecting chemical emulsion (Chlorpyriphos/Lindane E.C. 20% with 1% concentration), at the rate of one litre per hole at 300 mm c/c to all the horizontal and vertical surfaces of the excavations made for the foundation of the building, soil under floors, apron, back fill material and along all the faces of the walls for PRE-CONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion) as per IS:6313 Part-II. (Plinth area of Building shall be measured for Payment) |
| 6 | DSR Item- 4.1.8P/L cement concrete - all works upto plinth level : 1:4:8 (1 Cement : 4 coarse sand (zoneIII) : 8 graded stone aggregate 40 mm nominal size) |
| 7 | DSR Item- 4.11Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 8 | DSR Item- 4.13Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 9 | DSR Item- 4.1.3P/L cement concrete - all works upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | DSR Item- 5.33.1.1Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level |
| 11 | DSR Item- 5.33.2.1P/L RCC M25 design mix for columns, pillars piers etc. |
| 12 | DSR Item- 5.35Add for using extra cement in the items of design mix over and above the specified cement content therein. |
| 13 | DSR Item- 5.9Centering and shuttering including strutting, propping etc. and removal of form for : |
| 14 | DSR Item- 5.9.1Foundations, footings, bases of columns, etc. for mass concrete |
| 15 | DSR Item- 5.9.2Walls (any thickness) including attached pilasters,butteresses, plinth and string courses etc. |
| 16 | DSR Item- 5.9.6Columns, Pillars, Piers, Abutments, Posts and Struts |
| 17 | DSR Item- 5.9.5Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 18 | DSR Item- 5.9.3Suspended floors, roofs, landings, balconies and access platform |
| 19 | DSR Item- 5.9.19Weather shade, Chajjas, corbels etc., including edges |
| 20 | DSR Item- 5.9.20Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12 mm thick |
| 21 | DSR Item- 5.22.6Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars |
| 22 | DSR Item- 6.1.2Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 23 | DSR Item- 6.4.2Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 24 | DSR Item- 6.13.2Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 25 | DSR Item- 6.15Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. |
| 26 | DSR Item- 9.20.1Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces of shutters. |
| 27 | DSR Item- 9.70Providing and fixing ISI marked bright finished brass fitting for door windows. |
| 28 | DSR Item- 9.75.2250x16 mm sliding door bolts |
| 29 | DSR Item- 9.74.1250x10 mm Tower bolt |
| 30 | DSR Item- 9.74.3150x10 mm Tower bolt |
| 31 | DSR Item- 9.81.1125 mm handles |
| 32 | DSR Item- 9.81.2100 mm handles |
| 33 | DSR Item- 9.101.2hanging floor door stopper, Twin rubber stopper |
| 34 | DSR Item- 9.68.3200 Casement stays (straight peg type) with necessary screws etc. complete, weighing not less than 120 gms |
| 35 | DSR Item- 9.23Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 36 | DSR Item- 10.14.2.1Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge: (A) \\"Profile B\\" Fixing with adjustable lugs with split end tail to each jamb (S.R.) |
| 37 | DSR Item- 21.1Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) |
| 38 | DSR Item- 21.1.1.2For fixed portition: Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 39 | DSR Item- 21.1.2.2For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 40 | DSR Item- 21.3.2Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness |
| 41 | DSR Item- 21.17Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 42 | DSR Item- 10.29.2Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete: Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides |
| 43 | DSR Item- 21.8.1Filling the gap in between uPVC, aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete: Upto 5mm depth and 5 mm width |
| 44 | DSR Item- 10.28Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 45 | DSR Item- 10.20Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 46 | DSR Item- 11.41.2Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 47 | DSR Item- 11.39Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 48 | DSR Item- 8.31Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 49 | DSR Item- 11.56Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as pecified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 50 | DSR Item- 11.26.1Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 51 | DSR Item- 11.27Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 52 | NSI ITEM-Supply & Installation of Indoor PVC BWF Approved premarked Badminton Court Mating, 5.0mm thickness color Green, Crystal sand texture |
| 53 | NSI ITEM-Movable Badminton Pole made of Main Pipe 40x40mm Square, Each side adjustable rachid with net, fine quality |
| 54 | NSI ITEM-Refree Chair for Badminton Court, Total Height 8ft, Seat Size: 20\\"x20\\" Bottom front width 3 ft bottom side width 4 ft made out of 1 1½\\" OD and 4\\" x 2\\" MS Pipe with epoxy painted f |
| 55 | DSR Item- 12.54.2Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring ‘T’ with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holesand having NRC of 0.5, electro statically polyester powdercoated of thickness 60 microns (minimum), including factory painted after bending and perforation. |
| 56 | DSR Item-12.52.3Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 57 | DSR Item- 12.21Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase |
| 58 | DSR Item- 22.14.1Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 59 | DSR Item-14.90.1Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. :3 mm thick |
| 60 | DSR Item- 12.1.2Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.8 mm thick with zinc coating not less than 275 gm/m² |
| 61 | DSR Item- 12.4.1Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 62 | DSR Item- 12.7.1Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 63 | DSR Item- 13.1.212 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 64 | DSR Item-13.2.215 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) |
| 65 | DSR Item- 13.16.16 mm cement plaster 1:3 (1 cement: 3 fine sand) |
| 66 | DSR Item- 13.50.2Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 67 | DSR Item- 13.46.1Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) |
| 68 | DSR Item- 13.41.1Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer |
| 69 | DSR Item- 13.62.1Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 70 | DSR Item- 13.80Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 71 | DSR Item- 4.17Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
| 72 | DSR Item-6.44Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). |
| 73 | DSR Item- 17.1.1Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 74 | DSR Item-17.7.1Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 75 | DSR Item- 17.3.1Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 76 | DSR Item- 17.32.4Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 77 | DSR Item- 12.41.2P/L 110 mm dia UPVC soil waste pipe with pressure 6kg/CM2 for sewer. |
| 78 | DSR Item- 17.73.2Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms |
| 79 | NSI Item-P/F Upvc nahani trap 110x110mm dia |
| 80 | DSR Item- 18.65Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 81 | DSR Item- 12.43.2Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 82 | NSI Item-P/F Upvc terminal guard 110 mm dia |
| 83 | DSR Item- 18.74.2Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length |
| 84 | DSR Item- 12.42.5.2Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm bend |
| 85 | NSI Item-P/F Upvc door bend 110 mm dia. |
| 86 | DSR Item- 17.28.2.1Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia |
| 87 | DSR Item- 12.42.4.2Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming toIS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110x110x110 mm tee |
| 88 | DSR Item- 17.8P/F white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 89 | DSR Item- 17.5.2Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern |
| 90 | DSR Item-8.10.2Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade |
| 91 | DSR Item- 12.42.6.2Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.110 mm Shoe |
| 92 | DSR Item- 12.22Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete (1:2:4). |
| 93 | DSR Item- 12.43.2Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm |
| 94 | DSR Item- 18.8.1Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes. |
| 95 | DSR Item- 18.7Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass hreaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 96 | DSR Item- 18.7.220 mm nominal outer dia Pipes |
| 97 | DSR Item-18.7.325 mm nominal outer dia Pipes |
| 98 | DSR Item-18.12.4Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore |
| 99 | DSR Item- 18.49.1Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 100 | DSR Item-18.52.1Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 101 | DSR Item- 18.17Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 102 | DSR Item- 18.17.1.A20mm nominal bore |
| 103 | DSR Item- 18.17.125 mm nominal bore |
| 104 | DSR Item- 18.17.232 mm nominal bore |
| 105 | DSR Item- 18.58.1.1Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia |
| 106 | DSR Item- 18.48Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 107 | DSR Item- 18.18.2Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore |
| 108 | DSR Item- 18.20.3Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 25 mm nominal bore |
| 109 | DSR Item- 18.51.1Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 110 | DSR Item- 18.53.1Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore |
| 111 | DSR Item- 18.64Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms |
| 112 | SOR Item- 3-03Excavation in Soil with Dozer with lead upto 1000 metres (Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.) |
| 113 | SOR Item-11-5Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. |
| 114 | SOR Item-2-2Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 |
| 115 | SOR Item- 4-1-A-3Granular Sub-base with Well Graded Material By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. For Grading III Material |
| 116 | SOR Item- 2-6Providing and Laying of Interlocking Concrete Block Pavements of M-40 Grade having thickness 80 mm as per drawings and Technical Specification Clause 1504. |
| 117 | DSR Item- 2.1Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 118 | DSR Item- 2.2Supplying and stacking of good earth at site i/c royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment). |
| 119 | DSR Item- 2.3Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment) |
| 120 | DSR Item- 2.4.1Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm |
| 121 | DSR Item- 2.5Rough dressing the trenched ground including breaking clods |
| 122 | DSR Item- 2.6uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation |
| 123 | DSR Item- 2.7Fine dressing the ground |
| 124 | DSR Item- 2.8Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately) |
| 125 | DSR Item- 2.9Mixing earth and sludge or manure in proportion specified or directed by the officer-in-charge |
| 126 | DSR Item- 2.10.1Grassing with selection no. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including Supplying good earth, if needed (the grass and earth shall be paid separately). In rows 5 cm apart in both directions. |
| 127 | DSR Item- 2.12Uprooting rank vegetation and weeds by digging the area to a depth of 60cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts |
| 128 | DSR Item- 2.13Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm refilling the excvated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of rearth after redution by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling and directed, within a lead of 50m. lift upto 1.5m complete (cost of sludge, manure or extra earth to be paid for seperately) |
| 129 | DSR Item- 2.14.4Digging holes in ordinary soil and refilling the same with the exavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reductin by 8%9 flooding with water, dressing including remocal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for seperately) Holes 45cm dia and 45cm deep |
| 130 | DSR Item- 2.16Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge. |
| 131 | DSR Item- 2.19.1Edging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m : Common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 132 | DSR Item- 2.28Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge |
| 133 | DSR Item- 2.35Supplying and stacking of Selection No.-1 Grass at site fresh and free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc. and as per direction of officer in charge. |
| 134 | DSR Item- 2.54Anti termite treatment by digging holes 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge |
| 135 | DSR Item- 2.57Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cost of plant & water) |
| 136 | DSR Item- 2.57.1Trees Plant |
| 137 | DSR Item- 2.57.2Shrubs Plant |
| 138 | DSR Item- 5.13Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 139 | DSR Item- 8.1Providing and stacking of Cassia biflora of height 90-105 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge. |
| 140 | DSR Item- 11.452 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 141 | DSR Item- 5.1.2Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-lIll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 142 | DSR Item- 13.3.120 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 143 | DSR Item- 19.19.1.1Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450mm internal dimensions |
| 144 | DSR Item- 19.15.1Providing MS foot rest including fixing in manholes with 20x20x10cm cement concrete blocks 1:3:6 as per standard design. (i) with 20x20mm square bar |
| 145 | DSR Item- 19.32.1Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 146 | DSR Item- 19.19.4.1Providing and fixing in position pre cast RCC manhole cover and frame of required shape and of approved quality. EHD - 35 : Circular shape 560 mm internal dia |
| 147 | DSR Item- 23.1.1Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia |
| 148 | DSR Item- 23.5upplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge |
| 149 | DSR Item- 23.6Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge |
| 150 | DSR Item- 23.7Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. |
| 151 | DSR Item- 23.8Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge. |
| 152 | DSR Item- 23.3.2Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia |
| 153 | DSR Item- 23.4.2Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia |
| 154 | DSR Item- 23.13.2Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia. |
| 155 | DSR Item- 23.14.2Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts f required size complete. 150 mm clamp |
| 156 | DSR Item- 23.15.2Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I): 150 mm dia. |
| 157 | DSR Item- 19.6.2Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe |
| 158 | DSR Item- 18.12.8Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work.80 mm nominal bore |
| 159 | DSR Item- 18.17.6Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):80 mm dia |
| 160 | DSR Item- 18.33.1Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation oncrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 161 | DSR Item- 18.41.4Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :80 mm diameter pipe |
| 162 | DSR Item- 2.13.1.2Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material rmeasurements and disposal of nserviceable material as directed, within a lead of 50 m :Ordinary rock : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia |
| 163 | NSI Item-Providing and fixing unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. Upvc pipe 160 mm diameter |
| 164 | DSR Item- 19.3.2Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm dia. Upvc pipe |
| 165 | DSR Item- 19.4.1.2Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With Sewer bricks conforming to IS : 4885 |
| 166 | DSR Item- 19.7.1.2Constructing brick masonry M.H. in C.M. 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with C.M. 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in C.C. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90X80X45 cm i/c C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With Sewer bricks conforming to IS : 4885 |
| 167 | DSR Item- 19.8.1.2Extra for depth for manholes : Size 90x80 cm- With Sewer bricks conforming to IS : 4885 |
| 168 | DSR Item- 10.25.2Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 169 | DSR Item- 13.47.1Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm overand including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 170 | DSR Item- 16.53Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 171 | DSR Item- 13.44.1Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 172 | NSI Item-Acoustical Ceiling : Providing & fixing perforated Gypsum false ceiling , as marked in the drawings, consisting of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending GI intermediate channels of size 45mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angles of width 25mm x 10mm x 0.55mm thick fixed to soffit with GI cleats and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in a direction perpendicular to the intermediate channel at 300mm c/c. Finished in 12.5mm thick micro-perforated gypsum board, 1200mm x 2400mm, with 3mm dia square perforations. The board shall have an overlay of 50mm thick, 1000 GSM polyester wadding, appropriately covered with FGT tissue (in the case of glasswool/ rockwool). The ceiling to be finished with 2 or more coats of mat type plastic emulsion paint after proper jointing & making surface smooth. Approved make of gypsum perforated board: Knauf Danoline/ Absound Overseas micro perforated/ Saint gobin -Quattro board. |
| 173 | NSI Item-Acoustical paneling on walls : Providing and fixing Acoustical Wall paneling with Compressed polyester fibre nonwoven 10mm thick panels with a density of 200kg/m3, of size1200mmX600mm with an NRC of 0.80 to 0.85 . The panels to be pasted with approved construction adhesives over 9mm thick perforated ply (minimum 20% perforations). The 9mm thick perforated ply shall be fixed over GI framing consisting of 48x36x34x0.5mm thick GI Studs wall channels & floor channels @ 600mm c/c with filling of 50mm thick 1000GSM thermally bonded polyester wadding. The insulation to be supported from the back by covering the frame with 19mm mesh GI wire netting. Approved Make : Acoustic India/ Absound Overseas/AMF. |
| 174 | NSI Item-Providing & fixing 100x15mm thick Polished teak wood skirting at the bottom of wall paneling. The skirting shall be fixed over 12mm thick commercial ply to match the level of paneling. |
| 175 | NSI Item-Entry/exit doors 77mm thick, acoustic doors consisting of fire resistant materials & peripheral seals all around . The door to be laminated with 1mm thick laminate. The Door shutter frames to be of klin dried chemically treated second class teak wood. The door shutter frame to be lapped with 12mm thick BWR ply duly treated for fire retardance. Make : Global Fire/ Navair/ Absound Overseas. |
| 176 | NSI Item-Chowkhats for the doors in second class teak wood of size 125x 75mm duly fire treated. |
| 177 | NSI Item-Providing and fixing panic bars for the doors with double/single leaf with all necessary parts. Make: Geze/Dorma/Doorwin |
| 178 | NSI Item-Providing and fixing Hinges (Steel with bal bearings ) of size 125 X 32mm fixed with steel drive all screws of 35mm. Make: Doors, Ozone, Dorma |
| 179 | NSI Item-Providing and fixing external trim with locking arrangement & handle for panic bars double/single leaf with all necessary parts. Make: Geze/Dorma/Doorwin |
| 180 | NSI Item-Providing and fixing heavy duty door closers of load capacity of 100-120kg with all necessary parts. Make: Doors/Dorma/Godrej |
| 181 | NSI Item-Designing, enlarging & Execution of Uttarakhand Culture 2D Wall Painting. Complete with Transportation & installation. |
| 182 | NSI Item-Providing Leg press |
| 183 | NSI Item-Providing Twister |
| 184 | NSI Item-Providing chest press |
| 185 | NSI Item-Providing parellel Bar |
| 186 | NSI Item-Providing Air walker double |
| 187 | NSI Item-Providing Arm wheel |
| 188 | NSI Item-Providing Sit up Board |
| 189 | NSI Item-Providing Double surf board |
| 190 | NSI Item-FDV Units ( Force draft ventilation )Supply installation testing and commissioning of single skin FDV unit with non thremal break profile 24 G GI outside sheet with precoating and with flowing section.Complete with fan section with DIDW forward curved centrifugal fan,drive motors and accessories. Motor starter unit with switching.frame work shall be of Anodized Aluminum construction with Non thermal break profile.Pre filter section with 98% Efficiency filter rating.Floor Mounted Units. 20000 CFM @ 55 MM WC- Complete with celdek section- 150 mm thick Cellulose based Evaporative Pad,, water recirculation monobloc pump, with necessary piping, valves, SS-304 water tank, water distribution piping, nozzles suitable for FDV unit. |
| 191 | NSI Item-Casing made from mild steel plates and sheets reinforced with angle Iron.Its design is involute scroll for giving maximum efficiency . Suction is done with round flanged with supported fins to the cover and outlet is generally rectangular with extra support of angle on the casing . Minimum thickness of sheet is used in the casing 2.5 mm with maximum thickness goes to 3 mm MS sheet. The fourth quarter of casing is much larger as compaired to the other fans to get the maximum efficiency and free flow of air to be dragged from the outlet . IMPELLER- Impeller is of enclosed design made from mild steel sheets . It is designed for giving maximum efficiency for the designed head and volume . Impeller curve is of BACKWARD/FORWORD CURVED and the blade angle is of 56 degree to 48 degree . The Hub which is connected the impeller to the motor shaft is of Ms casting and the designed of the hub is beak type to get the maximum air flow at the center of the impeller .MOTOR PEDESTAL- MOTOR PEDESTAL is of mild steel reinforced with heavy angles . Its box section is welded to the casing so that all the center of mass will on the same base . BALANCING- IMPELLER is 100% dynamically as well as statically balanced thru ABRO BALANCING MACHINE with upto 0.001 gms in polar coordinates weight .STANDARD blowers, fans and exhausters are very ruggedly built , so that they withstand rough handling and can be used in duty atmospheres. Each blower , fans or exhauster is properly tested in our works Prior to dispatch .Exhaust air unit 18000 cfm/ 1400 rpm |
| 192 | DSR Item- 16.12Fabrication, supply, installation, testing & commissioning of Galvanised Iron ( GI ) GI Sheet ducting complete with nut bolt, gaskit, silicon sealent duct supports etc. as per drawings and specifications. . |
| 193 | DSR Item- 16.12.1.320 Gauge (Thickness 1.0mm) |
| 194 | DSR Item- 16.12.1.222 Gauge (Thickness 0.8mm) |
| 195 | DSR Item- 16.12.1.124 Gauge ( Thickness 0.63mm) |
| 196 | DSR Item- 16.15Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications. |
| 197 | DSR Item- 16.13Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. |
| 198 | DSR Item- 16.19.1Supply, installation, testing & commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications. 200 mm Dai |
| 199 | DSR Item- 16.25Thermal Insulation for DuctSupplying and fixing 50mm thick aluminium foil faced resin bonded fibre glass insulation (on duct) of density 24 kg/cu.m or mineral wool insulation(non combustible) of density 44kg/cum after applying two coats of cold setting adhesive (CPRX compound) sealing all joints with self adhesive aluminium tape & covering with 0.63mmx19mm GI wire mesh netting & butting all joints and laced with GI wire complete and finally covered with one layer of tar felt stuck with hot bitumen as perspecifications and as required. (for outdoor applications) |
| 200 | DSR Item- 16.21Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as perspecifications. |
| 201 | NSI Item-Supply and installing MS. Pipe \\"C\\" Class, IS 1239 standard including cutting, welding etc. Providing all required accessories like flanges, bends tees, reducers, supporting with GI. clamps etc. including painting with one coat of primer and two coat of red Synthetic enamel paint of aoopproved make &shades.(Pipe of JINDAL/SURYA) |
| 202 | 150 mm dia |
| 203 | 100mm dia. |
| 204 | NSI Item-Supply & Installation C.I. Butterfly valve of PN1.0 Rating , confirming to IS standard , complete with Flanges, gasket and nuts , bolts , etc .CASTELE/KARTAR/SANT150 mm dia/100mm/80mm dia. |
| 205 | NSI Item-supplying and fixing approved make 25mm dia. Automatic air release valve |
| 206 | NSI Item-Supply & Installation C.I. Non-Return valve of PN1.0 Rating , confirming to IS standard , complete with Flanges, gasket and nuts , bolts , etc .CASTELE/KARTAR/SANT150 mm dia/100mm/80mm dia. |
| 207 | NSI Item-Fire Extinguishers and accessoriesProviding & fixing CO2 Type Fire Extinguisher complete with Refill, ISI marked Tested & Approved.capacity 4.5 kg/ABC 4kg (9+9) |
| 208 | NSI Item-SITC of Ball Valve 25mm dia. |
| 209 | NSI Item-Fire Main Pump Electric operatedSupply & Installation ,testing and commissioning of fire authority approved horizontal single outlet pumping set with C.I. body and bronze impeller connected by meansof a flexible coupling Electric Operated Main Fire Pump, anti-vibration pads and M.S foundation complete in all respects as per specification ready for use and as per latest requierment of fire authority/regularities. Capacity:1620 lpm, : 60M |
| 210 | NSI Item-AIR VESSELSProviding and fixing of air vessel. 200 MM DIA X 1200 M |
| 211 | NSI Item-SITC of Jockey Pump 180LPM 60M Head. |
| 212 | NSI Item-Anti vibration ,mountings for pipemlines . 100/80 mm dia |
| 213 | NSI Item-Pressure Switch. |
| 214 | NSI Item-Pressure Guage |
| 215 | NSI Item-Supply, Installation,testing and comissioning of following' main fire alarm panel with 2X40 characters display to indicate fire and fault, led lamps for visual indication, the panels shall shall be networkable on RS-485 communication audio alarm unit, push buttons for acknowledge, test, reset complete with power supply unit for 24 Volt DC from 230 Volt AC and backed up by a battery complete as per detailed specifications.Also provide 6 NO & 6 NC contacts talk back facility, with all accessories as complete as required. |
| 216 | 4 Zone Panel |
| 217 | NSI Item-SITC of Smoke/Heat Detector. |
| 218 | NSI Item-SITC of Beam Detectors |
| 219 | NSI Item-SITC of Manual Call Point. |
| 220 | NSI Item-SITC of Electronic Hooter., |
| 221 | NSI Item-Providing and fixing shielded 1.5 sq mm copper conductor FRLS Ar.PVC sheathed FRLS cable including end terminators, saddles, clamps with screws etc for laying in conduits and complete as required. |
| 222 | NSI Item-SITC of Electrical panel for Main & jockey Fire Pumps. |
| 223 | NSI Item-3.5x35Sqmm Alu.Armoured cable |
| 224 | NSI Item-SITC of Hydrant Valve SS. |
| 225 | NSI Item-SITC of RRL Hose Pipe 15M SS Coupling. |
| 226 | NSI Item-SITC of SS Branch Pipe |
| 227 | NSI Item-SITC of Hose Box. |
| 228 | NSI Item-SITC of Hosereel with 30M pipe. |
| 229 | DSR Item- 1.10.3Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C |
| 230 | DSR Item- 1.12Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed mediumclass PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 231 | DSR Item- 1.13Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 232 | DSR Item- 1.4Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 233 | DSR Item- 1.14.12 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 234 | DSR Item- 1.14.22 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 235 | DSR Item- 1.14.42 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 236 | DSR Item- 1.14.104 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 237 | DSR Item- 1.18.2Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair |
| 238 | DSR Item- 1.19Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 239 | DSR Item- 1.11Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 240 | DSR Item- 1.21Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 241 | DSR Item- 1.21.120 mm |
| 242 | DSR Item- 1.21.225 mm |
| 243 | DSR Item- 1.32Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 5/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 244 | DSR Item- 1.31Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A & 5/6 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 245 | DSR Item- 1.38Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 246 | DSR Item- 2.4.2Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6way 4+18 Double Door |
| 247 | DSR Item- 2.10Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and neutral |
| 248 | DSR Item- 2.10.1Single pole |
| 249 | DSR Item-2.10.2Single pole and neutral |
| 250 | DSR Item-2.13Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 251 | DSR Item- 2.13.140A |
| 252 | DSR Item- 2.13.263A |
| 253 | DSR Item- 5.4Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 254 | DSR Item- 5.7Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 255 | DSR Item- 1.25Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 256 | DSR Item- 10.18P/F Hexagonal MS sheet fan box for ceiling fan clamp od internall dia 140mm, 73mm height top lid of 1.5mm thick MS sheet with its top surface hacked, MS clamp shall be made of 12mm dia MS bar bent to shape as per standard design. |
| 257 | DSR Item- 1.33Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 258 | DSR Item- 1.24Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 259 | DSR Item- 1.24.15/6 A switch |
| 260 | DSR Item- 1.24.43 pin 5/6 A socket outlet |
| 261 | DSR Item- 1.24.6Telephone socket outlet |
| 262 | DSR Item- 1.24.7TV antenna socket outlet |
| 263 | DSR Item- 1.27.2Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 module |
| 264 | DSR Item- 1.40Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required. |
| 265 | NSI Item-Supplying and fixing LED High Bay light 200 wattmade up of pressure die cast housing with toughned glass and individual LEDs with secondary optics AscentechR (AT_HB_200) (Note Wattage and lumen change as per direction of engineer-in-charges as per requirement/condition of site) |
| 266 | NSI Item-22 watt to 40 W LED Batten tube as per direction of engieer-in-charge |
| 267 | NSI item-300mm Bajaj propeller type ventlating fan with bird screen Freshee 300mm |
| 268 | DSR Item- 19.1Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 269 | NSI Item-LED 12 W Recess mounting Down Lighter |
| 270 | NSI Item-36W 2x2 LED panel CGCEL Panel luminary |
| 271 | DSR Item- 1.41Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 272 | NSI Item-SITC of 400mm wall fan |
| 273 | DSR Item- 1.50.1Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 274 | NSI Item-Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Main Distribution Panel fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, FRLSee standing floor /wall mounted, dust and vermin proof, with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated with CT PTs , Multifunction Meter,required Operating Handels and Mech. Interlocking fot Bus coupler MCCB. Building LT Panel as per specification with TP&N 600 amps BUS Bar INCOMER-630 amp FP MANUAL COS - 1 no, 630 amp 4P 36 KA TM OL SC MCCB with handle - 2 nos, Digital voltmeter - 1 nos, Digital amp meter - 1 nos, VSS - 1 nos, ASS - 1 nos , CT'S 600/5A CL-1 10 VA - 3 nos , R,Y,B Phase indicating lamps - 3 nos & 6A SP 1OKA MCB - 3 nosOUTGOINGS -Outgoing - 200 amp 36 KA FP MCCB -2 no.,Outgoing - 100 amp 36KA FP MCCB-5 nos &Outgoing - 125 Amp 30KA FP MCCB- 2 nos, 63 Amp 10KA FP MCB- 4 nos |
| 275 | NSI Item-Providing Gyser (water Heater) 15 Liter Capacity. 5 Star Candes |
| 276 | DSR Item- 2.11S/F single pole blanking plate in the existing MCB DB complete etc. as required. (4 no. /MCBDB) |
| 277 | DSR Item- 2.15Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 278 | DSR Item- 2.15.240 A |
| 279 | DSR Item- 2.15.363 A |
| 280 | DSR Item- 1.57Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. For AC |
| 281 | NSI Item-Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate One Module for modular switches in recessincluding supplying and fixing Cat-6 Data Information Outlet, crimpling, connection, testing etc. as required. |
| 282 | DSR Item- 1.53.2Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 2 cable run |
| 283 | NSI Item-Supplying installation testing commissioning of 24 Port, Gigabit Data switch Dlink with 2 U rack , cable maneger etc as reqd. |
| 284 | NSI Item-10W LED Batten Wipro Garnet D631065 Polycarbonate 6500K |
| 285 | DSR Item- 2.3.2Supplying and fixing 8 way, Double Door single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 286 | NSI item-Supply of 18W Inverter LED pr batten with backup 8 hrs |
| 287 | NSI Item-10 W LED Bulkhead Kinjal 10WLED Plastic |
| 288 | DSR Item- 2.2.15Providing and fixing 200 amps 36 KA breaking capacity Four pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required |
| 289 | NSI Item-SITC of outdoor panel for fresh air system for multipurpose hall with incommer 320 amp & outgoing 100 amp FP MCCB 02 nos, 63 amp FPMCCB 02 nos, 63 amp FPMCB 04 nos including freight charges with suitable size of busbar, voltmeter, amper meter complete as per direction of engineer-in-charge |
| 290 | NSI item-Hanging arrangement for with G.I frame complete finishing under 2 ft to 6 ft variable height etc complete with installation & scaffolding work of frame (Note hanging arragement system size if any changes, so changes as per direction of engineer-in-charge directions) |
| 291 | DSR Item- 5.4Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 292 | DSR Item- 5.11Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe FRLSom earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 293 | DSR Item- 9.1Supplying and making end temination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed /XLPE aluminium couductor cable of 1.1 KV grade as required. |
| 294 | DSR Item- 9.1.12x6 |
| 295 | DSR Item- 9.1.213.5x35 |
| 296 | DSR Item- 9.1.233.5x70 |
| 297 | DSR Item- 9.1.273.5x185 |
| 298 | NSI Item-6 meter GI octegonal pole single arm with loop in box Bajaj |
| 299 | NSI Item-Erection of Octagonal street light pole of 6 to 8 meter length in RCC 1:2:4 foundation including excavation, refilling, Reinforcement etc. as per Pole Manufacture design. |
| 300 | NSI Item-Supplying and fixing 60W LED streetlight made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection complete with all accessaries. |
| 301 | NSI Item-Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade aluminium conductor armored of following size in the existingRCC/ HUME/ METAL pipe,in Duct trench/cable tary etc. as required. |
| 302 | NSI Item-2x6 sq.mm |
| 303 | NSI Item-3.5x35 Sqmm |
| 304 | NSI Item-3.5x70 Sqmm |
| 305 | NSI Item-3.5x 185 Sq.mm |
| 306 | DSR Item- 14.13Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required |
| 307 | DSR Item- 14.13.280mm |
| 308 | DSR Item- 14.13.3110mm |
| 309 | DSR Item- 14.13.5150mm |
| 310 | DSR Item- 14.14.4Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 300mm |
| 311 | DSR Item- 14.16Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 312 | DSR Item- 14.16.163mm |
| 313 | DSR Item- 14.16.290mm |
| 314 | DSR Item- 14.16.4160mm |
| 315 | DSR Item- 4.1.4Supplying and installing following size of perforated paintedwith powder coating M.S. cable trays with perforation not morethan 17.5%, in convenient sections, joined with connectors,suspended from the ceiling with M.S. suspenders including bolts& nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness |
| 316 | NSI item-Supply, installation, testing and commissioning of Layer III Ethnernet switch : 24 port RJ45 10 base 1000 T (POE) with 2 nos uplink fiber ports |
| 317 | NSI item-Supply, installation, testing and commissioning of Layer II Ethnernet switch : 24 port RJ45 10 base 1000 T (POE) with 2 nos uplink fiber ports |
| 318 | NSI item-Supply, installation, testing and commissioning of 1 Giga Fiber Module |
| 319 | NSI item-Supply, installation, testing and commissioning of signal port I/O with SMB |
| 320 | NSI item-Supply, installation, testing and commissioning of 1 mtr patch cord |
| 321 | NSI item-Supply, installation, testing and commissioning of 3 mtr patch cord |
| 322 | NSI item-Supply, installation, testing and commissioning of 24 Port patch Panal |
| 323 | NSI item-Supply, Installation, Testing & Commissioning of 18 U rack complete with all accessories etc complete as per specifications and as required. |
| 324 | NSI item-Supply, Installation, Testing & Commissioning of 42 U rack complete with all accessories etc complete as per specifications and as required. |
| 325 | DSR item-1.53.3Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. |
| 326 | NSI item-Supply, Installation, Testing & Commissioning of 64Ch Embedded Network Video Recorder with 8 HDD Bays Supports 4K Cameras, HDMI, VGA and ONVIF Camera |
| 327 | NSI item-Supply, Installation, Testing & Commissioning of IP (Network) motorized Varifocal lens (2.8-12mm MFZ) bullet camera 2 megapixel, Progressive scan, CMOS, with 1920X1080 resolution @25 fps,WDR 120dB, 3D DNR, True Daynight,0.005 lux color sensitivity, 0 lux with IR upto 30 mts,IP66, rated, with POE, onboard storage upto 128GB micro SB card support, motion detection along with privacy masking. The camera shall be UL, CE, FCC certified. Complete with mounting bracket and all necessary accessories, civil, electrical works & peripheral items, as required. |
| 328 | NSI item-Supply, Installation, Testing & Commissioning of 2 MPX IP (Network) Motorized Verifocal lens 2.8 - 12mm MFZ, Vandal Proof Dome Camera Progressive scan, CMOS, with 1980X1080 resolution @25 fps,WDR 120dB, 3D DNR, True Daynight,0.01 lux color sensitivity, 0 lux with IR 30 mts, IP66, IK10 rated, with POE, onboard storage upto 128GB micro SB card support, motion detection along with privacy masking for Parking Area. The camera shall be UL, CE, FCC certified. Complete with mounting bracket and all necessary accessories, civil, electrical works & peripheral items, as required. |
| 329 | NSI item-Supply, installation, testing and commissioning of Layer II Ethnernet switch : 24 port RJ45 10 base 1000 T (POE) with 2 nos uplink fiber ports |
| 330 | NSI item-Supply, installation, testing and commissioning of 1 Giga Fiber Module |
| 331 | NSI item-8 TB HDD (Surveillance) |
| 332 | NSI item-Intel Xeon Server Max Number of sockets available on chipset 2 populated with processor 2 Number of core per processor 8 or more Processor configuration Inter Xeon silver or higher series PCI slots ( Express Gen 3.0) 1 or more Type of RAM DDR4 SDRAM with ECC RAM Size (GB) 64 RAM upgradable upto (GB) 256 or more Type of Hard Disk Drive SAS Total number of SAS slots At least 08 Hard disk drive capacity per SAS (GB) 480 or more Total capacity offered with SAS (GB) 1440 or more RAID controller cache (GB) 1 or more RAID type RAID 5 or higher LAN ports (1G/10G) 2 or more Video controller ( support VGA or above resolution) Yes Keyboard / Mous |
| 333 | NSI item-Supply, Installation, Testing & Commissioning of 65 \\" LED 7 X 24 Duty Cycle Commercial Display for CCTV |
| 334 | NSI item-Supply, Installation & Testing of 6 Core Fiber Cable with laying , termination of fiber optic cable and requires accessories |
| 335 | NSI item-Configuration, Installation Charges with One Year Onsite Warranty Support |
| 336 | NSI item-Supply, Installaton & Testing of Enclosure Box for IP Camera |
| 337 | NSI item-Supply, Installation & Testing of HDMI Cable 5 Mtr |
| 338 | NSI item-NVR Configuration, Rack Mounting & IP CCTV Camera Installation Charges with One Year Onsite Warranty Support |
| 339 | NSI ITEM-SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEMSupply,Installation,Testingand Commissioning of on grid Solar Photo voltaic Power Plant conforming to MNRE specifications as amended,consisting of Mono/PolyCrystal line silicon solar cells,net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a)Solar Photovoltaic Module of capacity 330Wp or above, manufactured in India,conforming toIS14286/IEC61215,IS/IEC61730-Part-1,IS/IEC61730-Part-2.Solar Photo voltaic Module conversion efficiency shall not be less than16.5%.PV modules used in solar power plants/systems must be warranted for their output peak watt capacity,which should not be less than 90%at the end of 10 years and 80% at the end of 25 years.b)Power Conditioning Unit (PCU) of 350-00VDC Input voltage range and 400VAC, three phase, 4wire, 50Hz+/2.5Hz, output voltage suitable to generate AC Power with efficiency not lessthan 97%, total harmonic distortionless than3% and suitable forambient temperature from 0 to 50 degreeC. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.c) Data Monitoring System complete with accessories.d)Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f)Connections & Inter connections by supplying & fixing required size XLPE insulated copper conductor 1.1kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc.as required. Remark Solar inverter has 6 yr warranty, Solar panel have 10 yr warranty, AMC is required after 6 yr, 1 Array will have 10 panel connected in series, Connection 1 array have 10 panels in series 240 volts DC, 10 amp, Connection 10 array output in parallel 240 volts 100 amp DC, Connection output 2 parallel array in series 480 volts 100 amp. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender