Educational and Research Institute Local Bodies Closing in 13 days TDR #56573788

Tender For Purchase Of Equipment , Co2 Incubator: , 1) Capacity: Interior Volume: 6.5 Cu Ft. (184.1 Liters) 2) Temperature: Control: +/-0.1Oc Range: 5Oc Above Ambient To 50Oc Uniformity: +/-0.3Oc @ 37Oc Tracking Alarm: User-Programmable Low 3) Over Temper

Issued by Local Bodies · Coimbatore, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Aug 2026
13 days left
EMD
8205
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Purchase Of Equipment , Co2 Incubator: , 1) Capacity: Interior Volume: 6.5 Cu Ft. (184.1 Liters) 2) Temperature: Control: +/-0.1Oc Range: 5Oc Above Ambient To 50Oc Uniformity: +/-0.3Oc @ 37Oc Tracking Alarm: User-Programmable Low 3) Over Temperature: Sensor: Precision Thermistor Setability: 0.1Oc Function: Shuts Off Heat 4) Temperature Safety: Sensor: Independent Thermostat Controller: Independent Analog Electronic 5) Sterilization Cycle Sensor: Precision Thermistor Cycle Temperature: 140Oc Cycle Length: 12 Hours 6) Co2: Control: Better Than +/-0.1% Co2 Range: 0-20% Inlet Pressure: 15 Psig (1.0 Bar) Co2 Sensor: T/C Readability & Setability: 0.1% Setability: 0.1% Tracking Alarm: User-Programmable, High/Low 7) Humidity: Rh: Ambient To 95%@ 37Oc; Humidity (Water) Pan: 3.2 Quarts (3.0 Liters) Standard Display (Optional): In 1% Increments 8) Dimensions: Exterior (Hxwxd): 39.5 X 26.3 X 25.0 (In); Interior (Hxwxd):26.8 X 21.3 X 20.0 (In) 9) Shelves: Dimensions Mm: 18.5 X 18.5(In) 470 X 470(Mm) Construction: Perforated Stainless Steel Standard: 4; Maximum: 15 10) Construction: Interior: Type 304, Shiny Stainless Steel Interior Volume: 6.5 Cu. Ft. (184.1 Liters) Exterior: 18 Gauge, Cold-Rolled, Steel, Powder Coated Outer Door Gasket: Four-Sided, Molded, Magnetic Vinyl Inner Door Gasket: Feather-Edged, Silicone 11) Electrical: 230V, 50/60 Hz, 4.4 Fla (Operating Range 180-250V) Cee 7/7 Plug Circuit Breaker, Power Switch: 12 Amps, 2 Pole Convenience Receptacle: 75 Watts Max. Alarm Contacts: Deviation Of Temp, Co2, Rh; Power Failure; Customer Connections Through Jack On Back Of Unit Access Port, Co2 Inlet: 1.3 (3.3Cm) With Removable Silicone Plug, 1/4 Barbed Hose Unit Heat Load: 341 Btuh (100 Watts), 85 Kcal Per Hour 12) Net Weight: 117.9 Kg Features: 1) Heat Sterilization Cycle 2) Entire Chamber Air Volume Should Be Hepa Filtered Within One Minute Of Door Closing. 3) Rapid Response Class 100 Air Quality 4) Unique Filtered Air Exchange Condensation Control System 5) Heating Elements And Insulation Surround All Sides Of The Outer Chamber Wall 6) Polished Stainless Steel Interior With 100% Coved Corners 7) Standard Four Heavy-Duty, Perforated Stainless Steel Shelves 8) Insulated Heated Outer Door 9) Removable, Cleanable Inner Door Gasket 10) Stackable Units 11) Remote Alarm Contacts 12) Outer Door Safety Sensor 13) Certifications/Compliance: Ul Listed And Ce Marked 14) Warranty: 1 Year

BOQ

Name of Work:- Purchase of Equipment
Sl. No. Item Description
1CO2 Incubator:
21) Capacity:Interior Volume: 6.5 cu ft. (184.1 liters)2) Temperature:Control: +/-0.1oCRange: 5oC above ambient to 50oCUniformity: +/-0.3oC @ 37oCTracking alarm: User-programmable low3) Over temperature:Sensor: Precision thermistorSetability: 0.1oCFunction: Shuts off heat4) Temperature Safety:Sensor: Independent thermostatController: Independent analog electronic5) Sterilization CycleSensor: Precision thermistorCycle Temperature: 140oCCycle Length: 12 hours6) CO2:Control: Better than +/-0.1%CO2 range: 0-20%Inlet pressure: 15 PSIG (1.0 bar)CO2 Sensor: T/CReadability & Setability: 0.1%Setability: 0.1%Tracking alarm: User-programmable, high/low7) Humidity:RH: Ambient to 95%@ 37oC; Humidity (Water) Pan: 3.2 quarts (3.0 liters) standardDisplay (optional): In 1% increments8) Dimensions:Exterior (HxWxD): 39.5 x 26.3 x 25.0 (in); Interior (HxWxD):26.8 x 21.3 x 20.0 (in)9) Shelves:Dimensions mm: 18.5 x 18.5(in) 470 x 470(mm)Construction: Perforated stainless steelStandard: 4; Maximum: 1510) Construction:Interior: Type 304, shiny stainless steelInterior volume: 6.5 cu. ft. (184.1 liters)Exterior: 18 gauge, cold-rolled, Steel, Powder coatedOuter door gasket: Four-sided, molded, magnetic vinyl Inner door gasket: Feather-edged, silicone11) Electrical:230V, 50/60 Hz, 4.4 FLA (operating range 180-250V) CEE 7/7 plugCircuit breaker, power switch: 12 Amps, 2 PoleConvenience receptacle: 75 Watts max.Alarm contacts: Deviation of temp, CO2, RH; power failure; customer connections through jack on back of unitAccess port, CO2 inlet: 1.3\\" (3.3cm) with removable silicone plug, 1/4\\" barbed hoseUnit heat load: 341 BTUH (100 Watts), 85 kcal per hour12) Net Weight: 117.9 KgFeatures:1) Heat Sterilization Cycle2) Entire chamber air volume should be HEPA filtered within one minute of door closing.3) Rapid Response Class 100 air quality4) Unique filtered air exchange condensation control system5) Heating elements and insulation surround all sides of the outer chamber wall6) Polished stainless steel interior with 100% coved corners7) Standard Four heavy-duty, perforated stainless steel shelves 8) Insulated heated outer door9) Removable, cleanable inner door gasket10) Stackable units11) Remote alarm contacts12) Outer door safety sensor13) Certifications/Compliance: UL Listed and CE Marked14) Warranty: 1 Year Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56573788
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 05-08-2026
Authority
Authority Name Department Of Higher Education
Work Description Tender For Purchase Of Equipment , Co2 Incubator: , 1) Capacity: Interior Volume: 6.5 Cu Ft. (184.1 Liters) 2) Temperature: Control: +/-0.1Oc Range: 5Oc Above Ambient To 50Oc Uniformity: +/-0.3Oc @ 37Oc Tracking Alarm: User-Programmable Low 3) Over Temperature: Sensor: Precision Thermistor Setability: 0.1Oc Function: Shuts Off Heat 4) Temperature Safety: Sensor: Independent Thermostat Controller: Independent Analog Electronic 5) Sterilization Cycle Sensor: Precision Thermistor Cycle Temperature: 140Oc Cycle Length: 12 Hours 6) Co2: Control: Better Than +/-0.1% Co2 Range: 0-20% Inlet Pressure: 15 Psig (1.0 Bar) Co2 Sensor: T/C Readability & Setability: 0.1% Setability: 0.1% Tracking Alarm: User-Programmable, High/Low 7) Humidity: Rh: Ambient To 95%@ 37Oc; Humidity (Water) Pan: 3.2 Quarts (3.0 Liters) Standard Display (Optional): In 1% Increments 8) Dimensions: Exterior (Hxwxd): 39.5 X 26.3 X 25.0 (In); Interior (Hxwxd):26.8 X 21.3 X 20.0 (In) 9) Shelves: Dimensions Mm: 18.5 X 18.5(In) 470 X 470(Mm) Construction: Perforated Stainless Steel Standard: 4; Maximum: 15 10) Construction: Interior: Type 304, Shiny Stainless Steel Interior Volume: 6.5 Cu. Ft. (184.1 Liters) Exterior: 18 Gauge, Cold-Rolled, Steel, Powder Coated Outer Door Gasket: Four-Sided, Molded, Magnetic Vinyl Inner Door Gasket: Feather-Edged, Silicone 11) Electrical: 230V, 50/60 Hz, 4.4 Fla (Operating Range 180-250V) Cee 7/7 Plug Circuit Breaker, Power Switch: 12 Amps, 2 Pole Convenience Receptacle: 75 Watts Max. Alarm Contacts: Deviation Of Temp, Co2, Rh; Power Failure; Customer Connections Through Jack On Back Of Unit Access Port, Co2 Inlet: 1.3 (3.3Cm) With Removable Silicone Plug, 1/4 Barbed Hose Unit Heat Load: 341 Btuh (100 Watts), 85 Kcal Per Hour 12) Net Weight: 117.9 Kg Features: 1) Heat Sterilization Cycle 2) Entire Chamber Air Volume Should Be Hepa Filtered Within One Minute Of Door Closing. 3) Rapid Response Class 100 Air Quality 4) Unique Filtered Air Exchange Condensation Control System 5) Heating Elements And Insulation Surround All Sides Of The Outer Chamber Wall 6) Polished Stainless Steel Interior With 100% Coved Corners 7) Standard Four Heavy-Duty, Perforated Stainless Steel Shelves 8) Insulated Heated Outer Door 9) Removable, Cleanable Inner Door Gasket 10) Stackable Units 11) Remote Alarm Contacts 12) Outer Door Safety Sensor 13) Certifications/Compliance: Ul Listed And Ce Marked 14) Warranty: 1 Year
Basic Detail
Tender No C7/CRTD/Biochem/ICMR/2889
Bidding Type Tender
Location
City Coimbatore
State Tamil Nadu
Key Dates
Publish Date 20 Jul 2026
Submission Date 05 Aug 2026
Open Date 06 Aug 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 8205
Exemption Available
Document List
BOQ_825832.xls
d9de37aa-5e78-4b3a-a608-964d72118f37.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Aug 06, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_825832.xls

html

d9de37aa-5e78-4b3a-a608-964d72118f37.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders