Tender For special repair To Bridge Over Sialbahali Jore At 1St Km, On Kutumdola To Sialbahali Ps Road For The Year 2026-27
Tender Value
25.19 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
3 days left
EMD
25210
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Balangir → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To Bridge Over Sialbahali Jore At 1St Km, On Kutumdola To Sialbahali Ps Road For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 of MoRD by manual means. |
| 2 | Construction of embankment with approved material obtained from borrow pits with all leads and lifts, transporting to site with mechanical means with in a lead of 5kms spreading, grading to required slope and compacting to meet requirement of table 300-2 and clause 305 of MOSRT&H specification for road and bridge work (4th revision) etc. with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 3 | Providing, spreading and consolidation of moorum with PRR including watering including cost, conveyance, royalty and taxes of all material labour and T&P required for the work etc. complete including 1% Cess as per the direction of the Engineer-in-charge. |
| 4 | Construction of granular sub-base by providing close graded granular sub base Grading III material as per table 401-1, spreading in uniform layer with moter grader on prepared surface, mixing by mix in place method with rotavator at OMC ,and compacting with vibratory roller to achieve the desired density complete as per clause 401 of MoSRT&H Specification for Road & Bridge works (4 th Revision) |
| 5 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision). |
| 6 | Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface etc with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 7 | Providing and applying tack coat with bitumen emulsion (RS-I) on prepared surface etc with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 8 | Providing & laying SDBC with batch mix hot mix plant using crushed aggregate of specified grading, premixed with bituminous binder of 60/70 penetration grade, transporting the hot mix to work site, laying with a hydrostatic paver finisher wit censor control to the required grade, level, alignment, rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road and bridge works (4th revision) |
| 9 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of3 mm thick corrugated sheet metal beam rail, 70 cm aboveroad/ground level, fixed on ISMC series channel vertical post, 150 x75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m belowground/road level, all steel parts and fitments to be galvanised by hotdip process, all fittings to conform to IS:1367 and IS:1364, metalbeam rail to be fixed on the vertical post with a spacer of channelsection 150 x 75 x 5 mm, 330 mm long complete as per clause 810 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender